DACHAN Smart RGB Outdoor Eaves String Lights

1. Introduction

Thank you for choosing the DACHAN Smart RGB Outdoor Eaves String Lights. This product is designed to provide versatile and vibrant lighting for your outdoor spaces, perfect for daily ambiance, holidays, and special events. Featuring smart app control, a remote control, and a durable, waterproof design, these lights offer a customizable lighting experience.

2. Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• Use only the provided power adapter and controller.
• Do not attempt to modify or repair the lights yourself. Contact qualified personnel if service is required.
• Keep children away from electrical components during installation.
• Ensure all connections are secure and waterproofed as instructed.
• The lights operate on a low voltage (24V) system, making them safe to touch during operation.

3. Package Contents

Please check the package to ensure all items are present:

• DACHAN Smart RGB Outdoor Eaves String Lights (15M with 30 bulbs or 30M with 60 bulbs, depending on model)
• Power Adapter
• Smart Controller
• Remote Control
• Securing Clips
• Screws
• Screwdriver
• User Manual

4. Specifications

Note: Specifications may vary slightly depending on the specific model and production batch.

5. Setup and Installation

Follow these steps for proper installation of your DACHAN Smart RGB Outdoor Eaves String Lights:

1. Plan Placement: Determine the desired location for your lights. It is recommended to install the string lights 5-10 cm away from the wall surface for optimal light dispersion.
2. Clean Surface: Before attaching the lights, thoroughly clean the installation surface (e.g., eaves) with a dry cloth or tissue to ensure proper adhesion.
3. Prepare Lights: Tear off the protective film from the VHB adhesive gum on the back of each light unit.
4. Attach Lights: Press each light unit firmly against the cleaned surface for more than 5 seconds to ensure strong adhesion.
5. Secure with Clips: For long-term use and added security, attach 4 screw clips to each string light. Use the provided screws and screwdriver to fix them firmly.
6. Connect Adapter: Connect the power adapter to the string lights via the connectors. Ensure the connection is tight and screw on the protective cap to seal it, maintaining the IP67 waterproof rating.

6. Operating Instructions

6.1. Powering On/Off

Once installed and connected to power, the lights can be turned on or off using the remote control or the 'MOCMO HOME' app.

6.2. Smart App Control

Download the "MOCMO HOME" app from your smartphone's app store. Follow the in-app instructions to pair your lights. Through the app, you can:

• Choose Colors: Select from 16 million colors to match any mood or occasion.
• Select Scenes: Access 63+ pre-set scene modes for various holidays (e.g., Halloween, Christmas) and events.
• Adjust Brightness: Dim or brighten the lights to your preference.
• Set Timers: Schedule your lights to turn on/off automatically at specific times.
• DIY Mode: Create and save your own custom lighting effects.
• Music Rhythm: Sync the lights to your music for dynamic displays.
• Voice Control: Integrate with compatible smart home systems for voice commands.

6.3. Remote Control

The included 2.4G remote control allows for convenient operation within a 20-meter range. Use it to:

• Turn lights On/Off.
• Change colors and modes (e.g., AUTO, QUICK, SLOW).
• Adjust brightness.
• Select specific colors (R, G, B, W).

6.4. Lighting Effects Demonstration

7. Maintenance

• Cleaning: Periodically wipe the light units with a soft, damp cloth to remove dust and debris. Ensure the power is off before cleaning.
• Inspection: Regularly check the wiring and connections for any signs of damage or wear. Ensure all screw clips remain secure.
• Waterproofing: The lights are IP67 waterproof and dustproof, designed for outdoor use in various weather conditions. However, avoid submerging the power adapter or controller in water.
• Storage: If storing the lights for an extended period, ensure they are clean and dry. Store them in a cool, dry place away from direct sunlight.

8. Troubleshooting

• Lights not turning on:
  • Check if the power adapter is securely plugged into a working outlet.
  • Ensure all connections between the lights and controller are tight and properly sealed.
  • Verify the remote control has working batteries and is within range.
  • Check the app for any error messages or connectivity issues.
• Remote control not responding:
  • Replace the remote control batteries.
  • Ensure there are no obstructions between the remote and the controller.
  • Try re-pairing the remote if applicable (refer to app instructions).
• App connectivity issues:
  • Ensure your smartphone's Bluetooth or Wi-Fi is enabled and working.
  • Restart the 'MOCMO HOME' app.
  • Unplug and re-plug the light's power adapter to reset the controller.
  • Ensure your router is functioning correctly and the lights are within Wi-Fi range if using Wi-Fi control.
• Lights flickering or inconsistent colors:
  • Check for loose connections along the string.
  • Ensure the power supply is stable.
  • If only specific bulbs are affected, inspect them for physical damage.

9. User Tips

• For the best visual effect, experiment with different installation distances from the wall (5-10 cm is a good starting point).
• Utilize the timer function in the app to automate your lighting schedule and save energy.
• Explore the DIY mode to create unique lighting patterns for special occasions or to match your home's aesthetic.
• When using music sync, place your phone or a microphone near the music source for optimal responsiveness.
• Consider grouping multiple sets of lights within the app for synchronized displays across larger areas.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty claims.