1. Introduction
Thank you for choosing the ZUOYA GMK70 mechanical keyboard. This manual provides detailed instructions on how to set up, operate, and customize your new keyboard. Please read it carefully to ensure optimal performance and a satisfying user experience.
2. Product Overview
2.1 Key Features
- RGB Backlight
- Hot-swappable Switches
- South-facing Light
- Three-mode Connection (Wired, Bluetooth 5.0, 2.4G Wireless)
- Silencing Pad
- Mac & Windows Compatibility
- 3000 mAh Battery
- VIA/QMK Support for Customization

Figure 1: ZUOYA GMK70 Key Features
2.2 Keyboard Components
The ZUOYA GMK70 features a modular design for enhanced customization and typing experience.

Figure 2: Exploded View of Keyboard Components. Labels include: knob, top cover, positioning board, sandwich, switch pad, PET film, circuit board, bottom cotton, silicone pad, bottom shell.
2.3 Ports and Switches
The keyboard is equipped with various ports and switches for versatile connectivity and control.

Figure 3: Side View of Keyboard Ports and Switches. Labels include: split keyboard connection socket, wired/wireless/Bluetooth switch, charging+wired connection socket, 2.4G receiver.

Figure 4: Keyboard Layout and Side View Diagram. Ports indicated: Receiver, Type-C, BT, USB, 2.4G, Connect port for L&R split keyboard.
3. Setup and Connection
3.1 Wired Mode
- Ensure the mode toggle switch on the keyboard is in the middle position.
- Connect the USB cable from the keyboard to your computer device.
- The keyboard backlight will light up with the default RGB effect, indicating a successful connection.
3.2 Bluetooth Pairing
The ZUOYA GMK70 Bluetooth keyboard can connect up to 3 Bluetooth devices simultaneously.
- Switch the mode toggle switch on the keyboard to the left (towards the USB interface) to enter Bluetooth mode.
- Press and hold FN + Q, FN + W, or FN + E for 3-5 seconds. The corresponding Q, W, or E key will start blinking rapidly, indicating the keyboard is in pairing mode.
- On your device (computer, laptop, tablet), open Bluetooth settings.
- Search for and select the device name:
- GMK70-1 for FN + Q
- GMK70-2 for FN + W
- GMK70-3 for FN + E
- Click to connect and pair.
- Once successfully connected, the Q, W, or E key will stop blinking.
- To switch between paired Bluetooth devices, short press FN + Q, FN + W, or FN + E.
- If the keyboard power is turned off, Bluetooth will disconnect. Upon powering on again, the ZUOYA GMK70 will automatically reconnect to the last used Bluetooth device.
3.3 2.4G Wireless Connection
- Switch the mode toggle switch on the keyboard to the right (2.4G mode).
- Insert the 2.4Ghz receiver into a USB port on your device. The keyboard should connect and be ready for use.
- For forced code pairing: Press and hold the FN + R key. The R key's LED will blink rapidly. While it's blinking, insert the receiver into the computer's USB port. The R key will stop blinking and resume its current backlight color upon successful connection.
3.4 DFU Mode (Device Firmware Upgrade)
DFU mode is used for firmware updates.
- Ensure the keyboard power is off.
- For the left keyboard: Press and hold the ESC key, then insert the USB cable.
- Alternatively, for either keyboard: Short circuit the positioning hole of the space bar switch, then insert the USB cable.
- For the right keyboard: Remove the ALT-R keycap, set the toggle switch to the bottom position, then short circuit the positioning hole of the space bar switch, and insert the USB cable.
- After updating the firmware, ensure the toggle switch is returned to the top position for normal operation.
4. Operating Instructions
4.1 LED Backlight Settings
| Key Combination | Function |
|---|---|
| FN + ↑ | Increase backlight brightness |
| FN + ↓ | Decrease backlight brightness |
| FN + ← | Decrease backlight effect speed |
| FN + → | Increase backlight effect speed |
| FN + -[{ | Decrease LED backlight hue |
| FN + ]} | Increase LED backlight hue |
| FN + X | Turn on/off RGB backlight |
| FN + TAB | Switch LED light effect |
| FN + '" | Increase LED backlight saturation |
| FN + ;: | Decrease LED backlight saturation |
| FN + \| | Adjust LOGO LED effect |

Figure 5: Keyboard knob and RGB lighting in action.
4.2 Multimedia Keys and Special Functions
| Key Combination | Function |
|---|---|
| FN + A | Switch to Windows system layout |
| FN + S | Switch to Mac system layout |
| FN + 1 to FN + 0 | F1 to F10 (default) |
| FN + -_ | F11 |
| FN + =+ | F12 |
| FN + Left CTRL | Toggle between number row and F-function row |
| FN + F1 | Music Player |
| FN + F2 | Volume Down |
| FN + F3 | Volume Up |
| FN + F4 | Mute |
| FN + F5 | Stop Playback |
| FN + F6 | Previous Song |
| FN + F7 | Play/Pause |
| FN + F8 | Next Song |
| FN + F9 | |
| FN + F10 | Home Page |
| FN + F11 | Calculator |
| FN + F12 | Search |
| FN + WIN | Lock/Unlock WIN key |
| FN + Y | Print Screen (PRTSC) |
| FN + U | Scroll Lock (SCROLL) |
| FN + I | Pause |
| FN + H | Home |
| FN + J | End |
| FN + K | Page Up (PG UP) |
| FN + L | Page Down (PG DN) |
| FN + DELETE | Insert |
5. Customization with VIA/QMK Software
The ZUOYA GMK70 supports VIA/QMK software for advanced key remapping, macro creation, and layer management. This allows for highly personalized keyboard layouts.
5.1 VIA Software Installation and Setup
- Download VIA Software: Visit https://github.com/WestBerryVIA/via-releases/releases to download and install the latest VIA software compatible with your operating system.
- Download and Load JSON File: Download the ZUOYA GMK70.JSON file from the official website. Open the VIA software and click 'Load' to import this JSON file.
- Connect Keyboard: Ensure your keyboard is properly plugged into your computer. VIA will automatically detect compatible keyboards. The keyboard's memory is persistent, meaning settings are retained regardless of where it's plugged in.
- Remap Keys: In the VIA software, click on the key you wish to change in the upper section, then click on the desired new function in the lower section to apply the change.
5.2 Layers
The ZUOYA GMK70 is configured with four default layers (0-3), allowing each key to have multiple functions. This is particularly useful for compact keyboards.
- Layer 0: Activated when the keyboard is connected to a Windows system device (after switching with FN+A).
- Layer 1: Activated by long-pressing the FN key when the keyboard is connected to a Windows system device (after switching with FN+A).
- Layer 2: Activated when the keyboard is connected to a Mac system device (after switching with FN+S).
- Layer 3: Activated by long-pressing the FN key when the keyboard is connected to a Mac system device (after switching with FN+S).
5.3 Macro and Special Key Settings
VIA software allows you to map custom macros and special key functions to any key on your keyboard, enabling quick operations.
6. Power Management
6.1 Automatic Sleep Modes
- Backlight Off: After 5 minutes of no key operation, the keyboard backlight will turn off. Press any key to wake the keyboard.
- Deep Sleep Mode: After 30 minutes of no key operation, the keyboard enters deep sleep mode, and Bluetooth will disconnect. Press any key to exit deep sleep mode; the RGB backlight will turn on, and Bluetooth will reconnect.
6.2 Charging and Battery Indicator
- Low Battery: When the battery level is below 3.5V, the FN key will continuously blink.
- Check Battery Level: Press FN + B. Keys 1 through 0 will light up, representing 10% to 100% battery charge respectively. Release FN+B to exit this mode.
- Check Charging Status: Press FN + Left Space. If the FN key shows a red light, it is charging. If it shows a green light, it is fully charged. Release to exit this mode.
7. Specifications
| Feature | Detail |
|---|---|
| Keyboard Standard | 68 keys |
| Operation Style | Mechanical |
| Type | Bluetooth Wireless |
| Interface Type | USB |
| Backlight Type | MULTICOLOR (RGB) |
| Switches Hot Swap | Yes |
| Full Size Keyboard | No |
| Wrist Support | No |
| Battery Included | Yes |
| Battery Capacity | 3000 mAh |
| Application | Desktop, Laptop, Tablet |
| Language | English |
| Package Length | 42 cm |
| Package Width | 16 cm |
| Package Height | 5 cm |
| Package Weight | 0.97 kg |
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the keyboard surface. For deeper cleaning, use compressed air to remove dust and debris from between keycaps.
- Keycap and Switch Removal: The hot-swappable design allows for easy removal and replacement of switches and keycaps. Use the provided tools (if any) to avoid damage.
- Firmware Updates: Regularly check the official ZUOYA website or VIA software for any available firmware updates to ensure optimal performance and new features.
9. Troubleshooting
- Keyboard not connecting: Ensure the mode toggle switch is set correctly for wired, Bluetooth, or 2.4G wireless mode. For wireless modes, check battery level. For Bluetooth, ensure proper pairing. For 2.4G, ensure the receiver is securely plugged in.
- VIA software not recognizing keyboard: Ensure the keyboard is properly plugged in via USB. If issues persist, try restarting the software and keyboard. If still unresolved, contact customer support.
- Backlight not working: Check backlight settings using FN key combinations (FN+X to toggle, FN+↑/↓ for brightness). Ensure the keyboard is not in a sleep mode.
- Keys not responding: Check if the keyboard is connected. If using wireless, check battery. If individual keys are not responding, ensure switches are properly seated in their sockets.
10. User Tips
- Experiment with VIA: Take advantage of the VIA software to create personalized key layouts and macros that suit your workflow or gaming style.
- Custom Switches: Since the keyboard is hot-swappable, consider trying different mechanical switches to find your preferred typing feel and sound.
- Layer Management: Utilize the multiple layers to assign different functions to keys for various applications or operating systems, maximizing the keyboard's versatility.
11. Support
For further assistance or detailed diagrams, please refer to the official user manual PDF available for download. You can find a link to the PDF manual here.
If you encounter any issues not covered in this manual or require technical support, please contact ZUOYI customer service.
Video 1: ZUOYA GMK70 Product Demonstration (Unboxing, switch/keycap installation, typing sound test, RGB lighting effects).