1. Product Overview
The EOENKK S510 TWS Wireless Headphones offer a high-quality audio experience with advanced features such as Bluetooth 5.3 connectivity, HiFi stereo sound, and intelligent noise reduction for clear calls. Designed for comfort and durability, these earphones are suitable for various activities, including gaming, music listening, and sports.
2. Package Contents
- 2 x S510 TWS Earphones (Left and Right)
- 1 x Charging Case
- 1 x Charging Cable (Type-C)
- 1 x User Manual
3. Setup
3.1 Initial Charging
Before first use, ensure the earphones and charging case are fully charged.
- Place both earphones into the charging case.
- Connect the provided Type-C charging cable to the charging port on the case and a suitable USB power source.
- The LED digital display on the charging case will show the battery percentage. Allow approximately 1.5 hours for a full charge.
- Once fully charged, disconnect the charging cable.
3.2 Wearing the Earphones
The S510 TWS earphones feature an ergonomic design for a comfortable and secure fit.
- Identify the Left (L) and Right (R) earphones.
- Gently insert each earphone into the corresponding ear canal, rotating slightly to find the most comfortable and secure position. The 45° golden angle design and silicone ear caps ensure a snug fit without discomfort.
3.3 Bluetooth Pairing
The earphones will automatically enter pairing mode when removed from the charging case.
- Open the charging case and remove both earphones. They will automatically power on and attempt to pair with each other.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "S510 TWS" from the list of available devices.
- Once connected, you will hear a confirmation prompt, and the earphones will be ready for use.
- For subsequent uses, the earphones will automatically connect to the last paired device when removed from the case.
4. Operating Instructions
4.1 Touch Controls
The S510 TWS earphones feature highly responsive touch controls on each earbud.
| Function | Action |
|---|---|
| Previous Song | Long press the left earphone |
| Next Song | Long press the right earphone |
| Reject Call | Long press 2 seconds on either earphone |
| Play/Pause | Click either earphone |
| Volume Up | Double click the right earphone |
| Volume Down | Double click the left earphone |
| Answer/Hang Up Call | Double click on either earphone |
| Activate Voice Assistant | Triple click either earphone |
4.2 HD Calling with ENC
The earphones are equipped with an AI intelligent noise reduction algorithm (ENC) that effectively separates human voice from environmental noise, ensuring high-definition calls even in noisy environments.
4.3 HiFi Stereo Sound & Spatial Audio
Experience rich and layered audio with the 10mm composite membrane dynamic speakers. Professional tuning and intelligent algorithms restore sound quality, providing clear treble, midrange, and bass. Spatial sound effects offer an immersive listening experience for music, videos, and games.
5. Maintenance
5.1 Cleaning
- Regularly clean the earphones and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Gently remove any earwax or debris from the ear tips and speaker mesh using a small, soft brush or cotton swab.
5.2 Charging and Battery Care
- Charge the earphones and case regularly, even if not in use, to maintain battery health.
- Avoid exposing the device to extreme temperatures (hot or cold) as this can affect battery life.
- Use only the provided Type-C charging cable or a certified equivalent.
5.3 Waterproofing (IPX5)
The S510 TWS earphones are IPX5 life-grade waterproof, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for use during exercise and in light rain.
- Do not submerge the earphones in water.
- Ensure the charging port is dry before charging.
- Wipe off any sweat or water after use to prevent damage.
6. Troubleshooting
6.1 Earphones Not Pairing with Device
- Ensure both earphones are removed from the charging case and powered on.
- Turn off Bluetooth on your device and turn it back on.
- Forget/delete "S510 TWS" from your device's Bluetooth list and try pairing again.
- Ensure the earphones are charged.
- Try restarting your device.
6.2 Only One Earphone Working
- Place both earphones back into the charging case, close the lid, wait a few seconds, then remove them again. This should force them to re-sync.
- Ensure both earphones are charged.
- If the issue persists, try resetting the earphones (refer to manufacturer's specific reset instructions if available, otherwise, a common method is to hold the touch area for 10-15 seconds while in the case, or remove them and hold for a longer duration).
6.3 Charging Case Not Charging
- Check the Type-C charging cable and power adapter for damage.
- Ensure the charging cable is securely connected to both the case and the power source.
- Try a different charging cable or power adapter.
6.4 Low Volume or Poor Sound Quality
- Adjust the volume on both your device and the earphones.
- Ensure the earphones are properly seated in your ears for optimal sound isolation.
- Clean any debris from the earphone speaker mesh and ear tips.
- Ensure there are no obstructions between your device and the earphones that could interfere with the Bluetooth signal.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Wireless Bluetooth Earphone (TWS) |
| Model | S510 |
| Brand | EOENKK |
| Bluetooth Version | 5.3 |
| Connection Distance | Up to 10 meters (<10m) |
| Earphone Playing Time | 3-4 hours (single charge) |
| Charging Case Standby Time | >360 hours |
| Charging Time | 1.5 hours |
| Charging Port | Type-C |
| Material | ABS |
| Driver Diameter | 10mm |
| Impedance Range | Up to 32 Ω |
| Frequency Response Range | 20 - 20000 Hz |
| Waterproof Rating | IPX5 |
| Microphone | Yes (with ENC) |
| Active Noise-Cancellation | Yes |
| Voice Assistant Built-in | Yes |
| Control Button | Yes (Touch Control) |
| Volume Control | Yes |
| Sound Isolating | Yes |
| Compatibility | Smartphones, laptops, tablets (Windows, iOS, Android) |
8. User Tips
- Optimal Fit: Experiment with different ear tip sizes (if provided, though not explicitly listed in package contents, it's common) to find the best seal for improved sound quality and noise isolation.
- Battery Monitoring: Keep an eye on the LED digital display on the charging case to know the exact battery percentage of the case and individual earbuds.
- Regular Cleaning: Clean the earbuds regularly, especially after workouts, to maintain hygiene and prevent sound degradation due to earwax buildup.
- Bluetooth Range: While the connection distance is up to 10m, performance can be affected by obstacles (walls, doors) and interference. Keep your device relatively close for the best experience.
9. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.