VASAGLE Console Table with 2 Shelves (20x80x80cm)

Contents

VASAGLE Console Table with 2 Shelves

Instruction Manual

1. Introduction

Thank you for choosing the VASAGLE Console Table. This narrow sofa table with two shelves is designed to add modern elegance and practical storage to your entryway, living room, hallway, or bedroom. This manual provides detailed instructions for assembly, usage, care, and maintenance to ensure safe and long-lasting enjoyment of your furniture.

2. Safety Information

  • Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
  • Assemble the product on a soft, clean surface to prevent scratches.
  • Do not exceed the maximum static load capacities for the tabletop and shelves.
  • Always use the provided tilt protection to secure the table to a wall, especially if children or pets are present, to prevent accidental tipping.
  • Keep small parts and packaging materials away from children.
  • Periodically check all connections and fasteners to ensure they remain tight.
Anti-tip kit installation diagram
Figure 1: Anti-tip kit installation. Secure the table to the wall using the provided hardware to prevent tipping.

3. Package Contents

Before starting assembly, please verify that all the following components are included in your package:

  • 1 x Console Table (disassembled components)
  • 1 x Accessories Package (screws, bolts, tools if applicable)
  • 1 x Tilt Protection Kit
  • 1 x Instruction Manual

4. Assembly Instructions

This console table requires assembly. The process is designed to be straightforward with clear instructions and marked parts. Assembly typically takes a moderate amount of time due to the number of screws involved, but the steps are easy to follow.

  1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Refer to the exploded view diagram to identify each part. All parts are labeled for easy identification.
  2. Assemble the Frame: Begin by connecting the main steel frame components using the provided screws. Ensure all connections are secure but do not overtighten until the entire frame is assembled.
  3. Attach Shelves: Once the frame is stable, attach the top and bottom shelves. The shelves are typically made of two parts that fit together tightly and are secured to the iron frame underneath.
  4. Install Adjustable Feet: Screw the adjustable feet into the bottom of the table legs. These can be adjusted to compensate for uneven floors, ensuring the table is stable and level.
  5. Install Tilt Protection: For safety, install the tilt protection kit according to the instructions provided in the package. This typically involves securing a strap or bracket to the back of the table and then to a wall stud.
Exploded view of console table parts for assembly
Figure 2: Exploded view showing all components and their labels for assembly.
Assembly step 1: Frame construction
Figure 3: Initial frame assembly.
Assembly step 2: Attaching the top shelf
Figure 4: Attaching the top shelf to the frame.
Assembly step 3: Attaching the bottom shelf
Figure 5: Attaching the bottom shelf to the frame.
Detail of adjustable feet
Figure 6: Adjustable feet for leveling the table on uneven surfaces.

5. Usage

The VASAGLE Console Table is versatile and can be used in various settings:

  • Entryway: Ideal for placing keys, mail, small decorative items, or a lamp.
  • Living Room: Functions as a sofa table, display shelf for plants, books, or decorative accents.
  • Hallway: Provides a narrow surface for essentials without obstructing traffic.
  • Bedroom: Can serve as a minimalist vanity or extra storage.

Ensure items placed on the table do not exceed the specified weight limits.

Brown console table in an entryway with mirror and decorations
Figure 7: Example of the brown console table in an entryway setting.
White console table in an entryway with mirror and decorations
Figure 8: Example of the white console table in an entryway setting.

6. Care and Maintenance

  • Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
  • Spills: Clean up spills immediately to prevent staining or damage to the wood chip panels.
  • Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters or protective pads. Protect from excessive moisture.
  • Sunlight: Prolonged exposure to direct sunlight may cause fading or discoloration.
  • Stability Check: Periodically check and tighten all screws and connections to maintain stability.

7. Troubleshooting

  • Dimension Discrepancy: Please note that while some product titles may state 20x100x80cm, the correct dimensions for this model are 20x80x80 cm (Depth x Width x Height) as detailed in the product specifications and diagrams.
  • Missing Parts: If you find any parts missing from your package, please contact customer support immediately for assistance.
  • Shelves Not Seamless: The shelves are designed in two parts. This is normal and they are engineered to attach tightly to the iron frame underneath, ensuring stability and preventing sagging.
  • Table Wobbles: Ensure all screws are tightened. Use the adjustable feet at the bottom of the legs to level the table on uneven floors.

8. Specifications

FeatureDetail
MaterialWood chip plate, Steel
Dimensions (D x W x H)20 x 80 x 80 cm
Product Weight6.4 kg
Max. Static Load Capacity (Tabletop)30 kg
Max. Static Load Capacity (Lower Shelf)20 kg
Installation MethodAssembly
General UseHome Furniture
Specific UseConsole Table
OriginMainland China
TypeLiving Room Furniture
Diagram showing dimensions and load capacities for the brown console table
Figure 9: Dimensions and load capacities for the brown console table (20x80x80 cm).
Diagram showing dimensions and load capacities for the white console table
Figure 10: Dimensions and load capacities for the white console table (20x80x80 cm).

9. User Tips

  • The table is noted for its stability and solid construction.
  • Assembly is generally considered very easy, with all parts clearly labeled and instructions being straightforward.
  • The shelf frame is made of iron, and the shelves are made of a durable, slightly rough plastic-like material, which helps prevent items from slipping.
  • Utilize the adjustable feet at the bottom to ensure the table is perfectly level, especially on uneven flooring.
  • The product is often praised for its good quality relative to its price and efficient packaging.

10. Warranty and Support

For any questions regarding your VASAGLE Console Table, including missing parts, assembly issues, or product defects, please contact the seller or manufacturer's customer support. Keep your purchase receipt and product information handy when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.