Introduction
Thank you for choosing the Povasee 5000A Jump Starter Power Bank. This device is designed to provide reliable emergency jump-starting for 12V vehicles and serve as a portable power bank for your electronic devices. With a powerful 5000A peak current, it can start a wide range of vehicles, including all gasoline engines and diesel engines up to 10L. Its compact design, 3-inch LCD display, and integrated LED flashlight make it an essential tool for roadside emergencies and outdoor activities.
The Povasee 5000A Jump Starter Power Bank, ready for use.
Package Contents
Please check the package contents to ensure all items are present:
- 1 x A40 Car Battery Emergency Starter (Main Unit)
- 1 x Smart Jumper Cables
- 1 x DC 5.5mm Cigarette Lighter Converter
- 1 x Type-C Charging Cable (without adapter)
- 1 x EVA Storage Box
- 1 x User Manual
All items included in the Povasee 5000A Jump Starter package.
Product Overview
Main Unit Features
- 3-inch Ultra Clear LCD Display: Shows remaining power, charging status, and active USB output.
- Emergency LED Flashlight: Features Flashlight, Strobe, and SOS modes.
- Input Port: Type-C (5V/9V/12V) for charging the jump starter.
- Output Ports:
- USB 1: 5V/2.4A
- USB 2 (QC3.0): 5V/3A, 9V/2A, 12V/1.5A
- DC Output: 12V/10A (for cigarette lighter converter)
The 3-inch LCD display provides clear status information.
The jump starter also functions as an 88Wh power bank with multiple output options.
Smart Jumper Cables
The smart jumper cables are equipped with safety features and indicators:
- Insulated Metal Clips: For safe connection to battery terminals.
- Indicator Light: Provides status feedback during jump-starting.
- Force Start Button (RST): Located at the bottom of the adapter, used for force-starting a completely dead battery.
- Anti-reverse Connection Plug: Prevents incorrect connection to the jump starter unit.
Key components of the smart jumper cables.
Specifications
| Feature | Specification |
|---|---|
| Model | A40 |
| Peak Current | 5000A |
| Battery Capacity | 88.8Wh |
| Start Voltage | 12V |
| Engine Compatibility | Up to All Gas or 10L Diesel Engines |
| Operating Temperature | -30℃ to 60℃ (-22°F to 140°F) |
| USB Output 1 | 5V/2.4A |
| USB Output 2 (QC3.0) | 5V/3A, 9V/2A, 12V/1.5A |
| DC Output | 12V/10A |
| Flashlight Lumens | 600 Lumens |
| Weight | 670 grams |
| Dimensions (approx.) | 215mm x 88mm |
Safety Instructions
The Povasee A40 Jump Starter is equipped with 10 protection functions to ensure safe operation. Always follow these guidelines:
- Over-current Protection: Prevents damage from excessive current.
- Short-Circuit Protection: Automatically shuts off in case of a short circuit.
- Over-Voltage Protection: Safeguards against voltage surges.
- Over-Charge Protection: Prevents battery damage from overcharging.
- Over-Discharge Protection: Protects the internal battery from deep discharge.
- Reverse-Polarity Protection: Alerts and prevents damage from incorrect battery terminal connection.
- Spark-Resistance: Minimizes sparks during connection.
- Over-Heat Protection: Shuts down if internal temperature exceeds safe limits.
- Reverse-Connection Protection: Prevents damage if cables are connected in reverse.
- Extreme-Temperature Protection: Designed to operate safely within specified temperature ranges (-30℃ to 60℃).
WARNING:
- Do not attempt to jump-start a vehicle if the jump starter's battery level is below 20%.
- Do not connect the red and black clamps together.
- Do not disassemble the unit.
- Keep out of reach of children.
The Povasee A40 includes comprehensive safety features.
Setup
Initial Charging
Before first use, fully charge the Povasee A40 Jump Starter. Connect the Type-C charging cable to the input port of the jump starter and to a suitable USB power adapter (not included). The LCD display will show the charging status and remaining power. A full charge is indicated by 100% on the display.
Operating Instructions
Jump Starting a Vehicle
Ensure the jump starter is sufficiently charged (above 20%) before attempting to jump-start a vehicle.
- Insert Smart Clip: Plug the smart jumper cable connector firmly into the jump starter's EC5 port.
- Connect to Vehicle Battery: Attach the red clamp to the vehicle's positive (+) battery terminal and the black clamp to the vehicle's negative (-) battery terminal. Ensure a secure connection. The indicator light on the smart clamp will show the connection status.
- Start Car Engine: Once connected correctly, start your car engine. If the car does not start immediately, wait a few seconds and try again.
- Remove Cables: After the car starts, immediately remove the smart clamps from the vehicle battery, then unplug the smart clip from the jump starter.
Force Start Function (for completely dead batteries):
If the vehicle battery is completely dead and the jump starter does not automatically detect it, you can use the force start function:
- Follow steps 1 and 2 above.
- Press and hold the "RST" button on the EC5 adapter (smart clamp) for 3 seconds. The green light on the adapter will turn solid green.
- Within 30 seconds, start your car engine.
- Immediately remove the smart clamps from the vehicle battery, then unplug the smart clip from the jump starter.
Step-by-step guide for jump starting your vehicle.
The jump starter in action, connected to a car battery.
Using as a Power Bank
The Povasee A40 can charge various electronic devices:
- USB Outputs: Use the USB 1 (5V/2.4A) or USB 2 (QC3.0) ports to charge smartphones, tablets, cameras, Kindle, etc. Connect your device's charging cable to the appropriate USB port on the jump starter.
- 12V DC Output: Use the included cigarette lighter converter with the 12V/10A DC output port to power 12V devices like gas pumps or car vacuum cleaners.
Charging multiple devices simultaneously with the power bank function.
Using the Emergency LED Flashlight
The integrated LED flashlight has three modes:
- Flashlight: Press the flashlight button once to turn on the steady light.
- Strobe: Press the button again to activate the strobe mode.
- SOS: Press the button a third time for the SOS signal mode.
- Press the button a fourth time to turn off the flashlight.
The LED flashlight offers three useful modes for emergencies.
The 600 lumens flashlight provides ample illumination in dark conditions.
Maintenance
- Regular Charging: To extend the battery life, it is recommended to fully charge the jump starter every 3 months, even if not in use.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasive materials.
Troubleshooting
- Device not turning on: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before the display activates.
- Vehicle not starting:
- Check if the smart clamps are securely connected to the correct battery terminals (red to positive, black to negative).
- Ensure the jump starter has sufficient charge (above 20%).
- If the battery is completely dead, use the force start function as described in the 'Operating Instructions' section.
- Check for any error indicators on the smart clamp or LCD display and refer to the safety section.
- Devices not charging from USB ports: Ensure the jump starter is powered on. Try a different USB cable or port.
User Tips
- Fast Charging: For quicker charging of compatible devices, utilize the USB 2 (QC3.0) output port.
- Always Be Prepared: Keep your jump starter fully charged and stored in your vehicle for unexpected emergencies.
- Check Battery Level: Regularly check the LCD display for the remaining power, especially before long trips.
Warranty and Support
The Povasee 5000A Jump Starter Power Bank comes with a 2-year quality assurance. For any technical support or assistance, please contact our service team. They are available to provide professional technical support.
