1. Introduction
This manual provides essential information for the safe and effective use of your ZGCINE DT-EL15 Dummy Battery with D-Tap Connector Power Cable. This product is designed to supply continuous power to compatible Nikon cameras, making it ideal for extended video recording sessions or live streaming without the need for frequent battery changes.
2. Product Overview
The ZGCINE DT-EL15 is an EN-EL15 dummy battery coupler integrated with a D-Tap power cable. It allows you to power your camera directly from a D-Tap output power source, such as a V-mount battery.
Key Features:
- EN-EL15 Dummy Battery: Replaces the standard EN-EL15 battery in your camera.
- D-Tap Power Cable: Connects to D-Tap power sources for external power.
- Stable Power Supply: Supports 14.8V input and provides a stable 8.4V/3A output to your camera.
- Extended Operation: Enables uninterrupted power for long video recording or live streaming.
Compatibility:
This dummy battery is compatible with a wide range of Nikon cameras, including:
- Nikon Z8
- Nikon Zf
- Nikon Z6
- Nikon Z6II
- Nikon Z7II
- Nikon Z5
- Nikon D850
- Nikon D810
- Nikon D810A
- Nikon D780
- Nikon D750
- Nikon D610
- Nikon D500
- Nikon D7500
- Nikon D7200
3. Specifications
| Feature | Specification |
|---|---|
| Model | DT-EL15 |
| Input (D-Tap) | 14.8V |
| Output (Dummy Battery) | 8.4V, 3A |
| Cable Length | Approx. 60cm (23.6 inches) |
| Dummy Battery Dimensions (H x W x T) | 3.93cm (1.5in) x 5.57cm (2.2in) x 2cm (0.8in) |
| Photography Accessories Type | Battery charger (functional category) |
4. Setup Instructions
- Prepare Power Source: Ensure your D-Tap compatible power source (e.g., V-mount battery) is adequately charged and provides a stable 14.8V output.
- Connect D-Tap: Plug the D-Tap connector of the power cable firmly into the D-Tap output port of your external power source.
- Insert Dummy Battery: Open the battery compartment of your Nikon camera. Carefully insert the EN-EL15 dummy battery into the compartment, ensuring it is correctly oriented and fully seated.
- Close Battery Door: Close the camera's battery compartment door. Some cameras require the battery door to be fully closed for the dummy battery to make proper contact and power the camera.
- Power On: Turn on your camera. It should now be powered by the external D-Tap source.
5. Operating Instructions
- Once the setup is complete, your camera will draw power from the connected D-Tap source.
- Monitor your camera's power indicator to ensure it is receiving power correctly.
- If using a V-mount battery or similar, monitor its charge level to avoid unexpected power loss during operation.
- The cable is designed for continuous power, allowing for extended shooting times without interruption.
6. Troubleshooting
- Camera not powering on:
- Ensure the D-Tap connector is fully and securely plugged into the power source.
- Verify that the external D-Tap power source is charged and functioning correctly.
- Check that the dummy battery is fully inserted into the camera's battery compartment and the battery door is completely closed.
- Confirm that your camera model is listed as compatible.
- Intermittent power:
- Check all connections for looseness.
- Inspect the cable for any visible damage or kinks.
- Ensure the D-Tap power source is providing a stable voltage.
- Overheating:
- If the dummy battery or cable feels excessively hot, immediately disconnect it from both the camera and the power source.
- Ensure proper ventilation around the camera and power source.
- Verify that the D-Tap power source's output voltage matches the required input (14.8V).
7. User Tips
- Always use a reliable and fully charged D-Tap power source to ensure consistent power delivery to your camera.
- Secure the power cable to your camera rig using cable clamps or ties to prevent accidental disconnection or strain on the ports during movement.
- Before important shoots, always test the dummy battery and power setup to ensure stable operation.
- When not in use, disconnect the dummy battery from the camera and the D-Tap cable from the power source to prevent accidental discharge or damage.
8. Maintenance
- Keep the dummy battery and D-Tap connector clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
- Avoid exposing the product to extreme temperatures, direct sunlight, or high humidity.
- Do not bend or twist the cable excessively, as this can damage the internal wiring.
- Store the product in a cool, dry place when not in use.
9. Warranty and Support
For warranty information or technical support, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase for any warranty claims.
