DEUKIO LEXA Pro

Contents

DEUKIO HE Series Spinning Fishing Reel User Manual

Model: LEXA Pro Series

1. Product Overview

This product is a HE series manual spinning reel, designed for freshwater and near-sea fishing activities. It features smooth transmission and adjustable brakes. With a compact design and ease of operation, it is specifically engineered for fishing enthusiasts.

The DEUKIO LEXA Pro series spinning reel is built with a high-strength nylon body and a metal spool, offering durability and performance. Key features include a 15KG maximum drag, a 5.2:1 gear ratio (model dependent), and a 3+1BB bearing system for smooth operation. Its waterproof design makes it suitable for both fresh and saltwater environments.

DEUKIO Spinning Fishing Reel, front view
DEUKIO Spinning Fishing Reel (LEXA Pro Series)

2. Warning and Safety Information

Warning

  • This product is only suitable for fishing activities. It is strictly prohibited for use in dragging heavy objects, tying and securing objects, or as a children's toy for non-fishing purposes. Misuse may result in damage to the product structure and breakage of fishing lines, leading to personal injury or property damage.
  • Before use, inspect core components (spool, handle, brake knob, main shaft) for cracks, looseness, deformation, or rust. Ensure all connections are secure. If any parts are damaged, stop using the device immediately. Disassembly, repair, or continued operation of damaged parts is strictly prohibited.
  • During operation, keep fingers, clothing, and hair away from the rotating spool and transmission components to avoid entanglement, pinching, or tangling. Children over 12 years old must use this product under adult supervision. Children under 3 years old are prohibited from touching this product to prevent accidental ingestion of small parts (such as screws).
  • Avoid operating in thunderstorms, strong winds, or high temperatures (above 45°C). Prolonged use or storage in damp or waterlogged environments should be avoided. Failure to clean after saltwater use can lead to salt spray corrosion.
  • Before disassembly and maintenance, ensure all operations are stopped, the spool is stationary, the spool lock is closed, and use special tools. Do not operate while the spool is rotating. Disassemble in a switched-off state to prevent internal parts from popping out and causing injury.
  • If the line snags or entangles during fishing, do not forcefully pull the rod or reel. Slowly untangle the line or cut it if necessary to avoid further damage. Excessive force can break the shell or rod, leading to injuries.
  • Do not modify this product without authorization, including replacing non-original parts or modifying the transmission system/electric drive. Such modifications compromise product safety and increase usage risks.

3. Components and Structure

The following describes the core components of the HE spinning wheel. Always refer to the actual product for component identification.

  • Spool: Used for winding fishing line. Made of high-strength material to prevent deformation under stress.
  • Brake Knob: Located at the front of the spool, used to adjust braking force for handling fish catches of varying resistance.
  • Line Cup Lock: Controls the release and locking of the fishing line, a key control component for casting and retrieving line.
  • Handle: Rotates clockwise to retract the line. Installation direction can be adjusted according to usage habits.
  • Main Shaft: Connects the spool to the transmission system, ensuring smooth rotation.
  • Housing: Protects internal transmission components, with anti-corrosion and impact-resistant properties.
  • Line Guide Hole: Guides the fishing line to wrap evenly around the spool, reducing line wear and tear.
  • Transmission Gear Set: Built-in high-precision gears ensure stable power transmission during line retraction.
    Precision cold forged high-strength gear
    Precision cold forged high-strength gear for durability.

Illustration Tip: Please confirm the positions of each component based on the actual item, and familiarize yourself with the functions of the components before proceeding with operation.

4. Setup Instructions

4.1 Component Installation and Threading

  1. Installation and Fixing: Connect the spinning reel to the fishing rod through the clamp and tighten the fixing screw to ensure a secure installation without any wobbling. Adjust the handle direction according to your usage habit and tighten the handle fixing nut.
    CNC metal screw in handle
    CNC metal screw-in handle for secure attachment.
  2. Line Threading Operation:
    • Open the spool lock.
    • Thread the fishing line through the rod's guide rings in sequence.
    • Thread the line into the guide hole at the front of the spinning reel spool.
    • Wrap the fishing line around the spool in a clockwise motion 3-4 times, tightening the line to ensure a secure wrap and prevent slippage.
    • Close the spool lock and turn the handle to wind the fishing line.
    • Wind the line evenly onto the spool, ensuring the winding does not exceed the edge of the spool by 1-2mm to prevent the fishing line from spilling out.
      Ultra large line capacity spool with anti-slip coil feature
      Ultra-large line capacity spool with anti-slip coil.

5. Operating Instructions

5.1 Casting Operation

  1. Preparations: Hold the fishing rod, place the spinning reel handle on the side that is not the casting hand, gently press the fishing line on the spool with your index finger, and maintain the fishing position. Ensure the line is taut.
  2. Casting Action: Open the spool lock, keeping your index finger holding the line in place to prevent premature release. Aim at the target area and swing the rod smoothly. When the fishing rod is swung at an angle of 45 degrees to the horizontal plane, slowly release your index finger, allowing the fishing line to naturally cast the hook and lead sinker towards the target.
  3. Finishing Actions: After casting, immediately close the spool lock, turn the handle to tighten the fishing line, keeping it at a moderate tension, and adjust accordingly. Turn the brake knob to a moderate force, and get ready to reel in the fish.

5.2 Line Management and Fish Handling

  1. Normal Line Retrieval: When there is no catch, turn the handle clockwise at a steady speed to retrieve the line, ensuring that the fishing line is evenly wound around the spool to avoid tangling.
  2. Fishing and Reeling in the Catch: After the fish takes the bait, sense the pull of the catch and slowly reel in the line clockwise. Do not forcefully reel in the line. If the fishing resistance is high, adjust the brake knob to increase braking force, using the elasticity of the fishing rod to cushion the impact of the catch and prevent the fishing line from breaking. Wait until the catch's energy is depleted before pulling. After the force has subsided, gradually increase the speed of reeling in the line, and pull the catch to the shore for unhooking.
    15KG big braking system, showing felt brake pads
    15KG Max Drag system with wool felt brake pads.

5.3 Shutdown and Storage

  • After each use, tighten the fishing line, close the spool lock, return the handle to its original position, and wipe off any moisture, dirt, and residual fishing line from the product's surface.
  • After using in seawater, the spool, line holes, and surface of the casing need to be rinsed with clean water, then dried and placed in a ventilated area to avoid salt spray corrosion.
  • For long-term storage, remove the fishing line, apply a small amount of fishing gear-specific lubricant to the transmission parts, and store in a dry, ventilated, and cool place. Keep away from corrosive substances and high-temperature environments.

6. Maintenance and Care

  1. Daily Maintenance: After each use, wipe the product surface with a dry cloth to remove moisture, dirt, and fishing line residue. Regularly check the connections of all components and tighten any loose screws promptly.
  2. Lubrication and Maintenance: After every 3-5 uses, apply a small amount of fishing gear-specific lubricant to the handle shaft, spool bearing, and transmission gear set to maintain smooth rotation and prevent rust.
  3. Component Protection: Avoid strong impacts and compression on the product to prevent the spool and casing from deforming. Avoid contact with sharp objects during storage to prevent surface scratches.
  4. Corrosion Protection: After using in seawater, thoroughly rinse with clean water, paying special attention to cleaning the spool, line guide holes, and brake knob areas. After drying, air dry completely before storing.
    SWSR5 Sealed Waterproof Design, showing internal seals
    SWSR5 Sealed Waterproof Design for enhanced rust prevention.

7. Troubleshooting

  • Line Tangling/Uneven Winding: Ensure the line is threaded correctly through all guide rings and the line guide hole. Wind the line evenly onto the spool, not exceeding 1-2mm from the edge.
  • Stiff Drag Knob: Check for any debris or salt residue around the brake knob. Clean thoroughly and apply a small amount of lubricant if necessary.
  • Reduced Braking Force: Inspect the wool felt brake pads for wear. If significantly worn, they may need replacement.
  • Reel Shake/Jerkiness: Ensure the handle is securely tightened. Check for any looseness in the main shaft or transmission gear set.
  • Difficulty in Casting: Verify the spool lock is fully open during casting. Ensure the line is not tangled or obstructed.

8. Specifications

General Product Specifications
Attribute Value
Brand Name DEUKIO
Model Number LEXA Pro
Material Metal
Baits Type Powder
Fishing Reels Type Pre-Loading Spinning Wheel
Fishing Method Spinning Wheel
Position Ocean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, LAKE, River, Reservoir Pond, Stream, Management Field
High-concerned chemical none
Origin Mainland China

8.1 Model-Specific Specifications (LEXA Pro Series)

Detailed specifications table for LEXA Pro models (2000-7000) including speed ratio, bearing, braking force, weight, and line capacity, along with dimensional diagrams of the reels and spools.
Detailed specifications and dimensions for LEXA Pro 2000-7000 series.
MODEL SPEED RATIO BEARING BRAKING (KG) NET WEIGHT (G) GROSS WEIGHT (G) LINE CAPACITY (MM/M)
LEXA2000 PRO 5.2:1 3+1BB 8 230 289 0.24/160 0.28/130 0.33/110
LEXA3000 PRO 5.2:1 3+1BB 8 234 290 0.24/180 0.28/150 0.33/130
LEXA4000 PRO 5.2:1 3+1BB 12 244 300 0.28/165 0.33/145 0.38/125
LEXA5000 PRO 5.2:1 3+1BB 12 249 305 0.28/185 0.33/165 0.38/145
LEXA6000 PRO 4.9:1 3+1BB 15 333 408 0.35/230 0.40/195 0.45/145
LEXA7000 PRO 4.9:1 3+1BB 15 340 416 0.35/270 0.40/210 0.45/175

8.2 Usage Restrictions

  • Water Restrictions: Suitable for freshwater and shallow coastal areas. Strictly prohibited in deep sea, rapids, or heavily polluted waters to prevent excessive wear or corrosion.
  • Fishing Line Specification Restrictions: Applicable line diameter range is 0.15-0.35mm (corresponding to a tensile force of 2-8kg). Using lines exceeding this specification is strictly prohibited to prevent damage to the spool and transmission gear set.
  • Tensile Limit: The maximum tensile force the product can withstand does not exceed 8kg (specific details are subject to the specifications of the corresponding model). Strictly prohibited to use it for pulling beyond the rated tensile force or heavy objects, to prevent the main shaft and gears from breaking.
  • Temperature Limit: Operating temperature range is -10°C to 45°C. Extreme temperatures can cause components to become brittle, deform, or fail, affecting safety and lifespan.
  • Age Restrictions: Only applicable to adults and children over 12 years old with basic fishing skills. Children must be supervised by an adult at all times. Individuals without operational skills should not use it alone.
  • Other Restrictions: Strictly prohibited to use this product while under the influence of alcohol or in a state of fatigue to avoid operational errors. Multiple connections or using multiple fishhooks for high-intensity fishing are not allowed to prevent product overload damage.

9. User Tips

  • Size Recommendation: Some users suggest buying one size larger than your usual preference (e.g., if you need a 4000 series, consider a 5000 series) as these reels may run slightly smaller than other brands.
  • Saltwater Use: The reel is designed for saltwater, but thorough rinsing with clean water and drying after each saltwater use is crucial to prevent corrosion and ensure longevity.
  • Smooth Operation: The reel is noted for its smooth winding and minimal handle play, contributing to a pleasant fishing experience.
  • Value for Money: Many users highlight the excellent quality and performance for the price, comparing it favorably to more expensive reels.
  • Handle Design: The screw-on handle design makes maintenance and modifications easier.

10. Frequently Asked Questions (FAQ)

Q: Where can I find spare parts for this reel?
A: For spare parts, it is recommended to contact the seller or manufacturer directly. They can provide information on availability and purchasing options.
Q: Does the package include extra washers for reel calibration?
A: The product description and manual do not explicitly state the inclusion of extra calibration washers. Please check the package contents upon receipt or contact the seller for confirmation.

11. Warranty and Support

This manual provides information regarding the use, safety, compliance, and maintenance of the HE series spinning reels. It does not provide any after-sales service terms, commitments, or repair guarantees.

After product damage, the user is responsible for handling the issue on their own. For further assistance or inquiries, please refer to the official user manual PDF available at: DEUKIO HE Series Spinning Reel User Manual (PDF).

This product complies with relevant EU regulations and harmonized standards, including:

  • EU Machinery Directive 2006/42/EC (June 9, 2006) - Safety design of mechanical products.
  • Harmonization standard ENISO12100:2010, "Mechanical Safety - Basic Concepts and Design Principles" (November 2010).
  • Harmonization standard EN60335-1:2021, "Safety of Household and Similar Appliances Part 1: General Requirements" (February 2021) - Electrical safety (applicable to models with electric assist functions).
  • Harmonization standard EN61000-6-1:2019, "Electromagnetic Compatibility Part 6-1: General Standards - Emission Requirements" (July 2019) - Control of electromagnetic emission interference.

12. Product Demonstration Video

Watch this video for a visual demonstration of the DEUKIO HE Series Spinning Fishing Reel's features and operation.

Product demonstration video showcasing features like high-strength nylon body, large diameter drag knob, aluminum alloy line cup, wool felt brake pads, stainless steel guide rod and main shaft, and ergonomic handle.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.