1. Product Introduction
The V519 is a multi-functional vehicle fault diagnosis instrument designed to support nine OBD II/EOBD standard protocols. This device offers plug-and-play functionality, allowing for quick reading of vehicle fault information and parameters. It serves as a comprehensive tool for vehicle diagnostics. Please read this manual thoroughly before using the product.
Figure 1: V519 User Manual Cover
2. Safety Notes
- Do not use abrasive cleaners to clean this product.
- Do not expose this product to excessive heat or place it near fire sources.
- Avoid prolonged direct sunlight exposure to the product.
- Do not attempt to disassemble or modify this product, as it contains no user-serviceable parts.
- Do not use this product in rainy conditions.
- For long-term storage, keep the product in a dry environment, away from extreme temperatures and dust.
3. Product Overview and Components
The V519 diagnostic tool features a 2.8-inch color display and intuitive button controls for easy operation.
Figure 2: V519 Product Appearance and Function Keys
- Product Connecting Line: Used to connect to the vehicle's OBD interface.
- 2.8-inch Color Display Screen: Resolution 240*320 pixels.
- F1 Button: Quick read current fault code.
- F2 Button: (Function varies by context, often for specific tests or navigation).
- EXIT Button: Back/Exit.
- Up Button: Navigation.
- Left Button: Navigation.
- Right Button: Navigation.
- Down Button: Navigation.
- OK Button: Confirmation.
- Software Upgrade/Printing Interface: (Usually a USB port for connection to PC).
- Review Button: Access review functions.
- Voltage Button: Access battery voltage reading.
- Setup Button: Access settings.
4. Specifications
4.1 Product Parameters
- Working Voltage: DC 9-16V
- Operating Current: 48~72mA
- Operating Environment: -20℃ to 65℃
- Storage Temperature: -30℃ to 70℃
- Overall Dimensions: 155*87*24mm
4.2 Supported Protocols
- SAE J1850 PWM (41.6Kbaud)
- SAE J1850 VPW (10.4Kbaud)
- ISO 9141-2 (5 baud init, 10.4Kbaud)
- ISO 14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO 14230-4 KWP (fast init, 10.4 Kbaud)
- ISO 15765-4 CAN (11bit ID, 500 Kbaud)
- ISO 15765-4 CAN (29bit ID, 500 Kbaud)
- ISO 15765-4 CAN (11bit ID, 250 Kbaud)
- ISO 15765-4 CAN (29bit ID, 250 Kbaud)
5. Setup
To begin vehicle inspection, locate the special OBD interface in your car. The location of OBD interfaces varies by model, but it is typically found in the inner panel at the lower left of the instrument panel, above the accelerator pedal. Refer to your vehicle's manual if you cannot locate it. Once connected, start the vehicle.
Figure 3: Common OBD Interface Locations (A, B, C, D)
- Ensure the vehicle's ignition is off.
- Plug the V519 scanner's OBD connector into the vehicle's OBD-II port.
- Turn the vehicle's ignition to the ON position (engine can be off or running, depending on the test). The scanner will power on automatically.
- Start the vehicle's engine if required for specific diagnostic functions.
6. Operating Instructions
6.1 Test Main Menu
After connecting the vehicle, the device will display the main page. Select the