YaLumei Toyota Corolla E210

Contents

Instruction Manual

YaLumei Stainless Car Water Cup Holder Decorative Frame

Model: Toyota Corolla E210 (2019-2024)

1. Product Information

This product is a decorative trim set designed for the car interior, specifically for the water cup holder and surrounding console area.

  • Product Name: Car interior decorative stickers
  • Brand: YaLumei
  • Model Name: For Toyota Corolla E210
  • Compatible Years: 2019, 2020, 2021, 2022, 2023, 2024
  • Item Type: Interior Mouldings
  • Material: Stainless steel
  • External Testing Certification: CE
  • Package Dimensions: Approximately 41 cm (Length) x 24 cm (Width) x 2 cm (Height)
  • Package Weight: Approximately 0.312 kg

Scope of Application

  • All products are manufactured based on 1:1 actual vehicle scanning data to ensure precise fit.
  • Before installation, it is crucial to confirm your vehicle model and ensure the installation position shape is compatible with the product.

2. Safety & Warnings

Important Safety Information

Read all instructions thoroughly before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • During installation, ensure the vehicle's engine is off, power is disconnected, and the handbrake is engaged to prevent sliding or accidental electrical activation, which could cause safety hazards.
  • This product is not flame retardant. Keep it away from ignition sources (e.g., cigarette lighters) and high-temperature parts (e.g., near the engine compartment, exhaust pipe) to avoid deformation, burning, or fire.
  • The product and its packaging may contain small parts. Keep them away from children and pets to prevent ingestion, entanglement, or suffocation.
  • Important Note: This product is not suitable for Right Hand Drive (RHD) vehicles.

3. Installation

The installation process involves preparing the surface, applying an adhesion promoter, and carefully attaching the decorative trim pieces.

Installation Steps:

  1. Clean the Surface: Thoroughly clean the car interior panel where the trim will be installed. Ensure it is free from fine particles, dust, and grease.
  2. Apply Adhesion Promoter: Apply the provided adhesion promoter to the back of each product piece. This enhances the adhesive bond.
  3. Peel Off Backing: Carefully peel off the protective backing from the adhesive tape on the product.
  4. Align and Paste: Align each trim piece precisely with its corresponding position on the car interior panel.
  5. Press Firmly: Once aligned, press down firmly on the trim piece for several seconds to ensure strong and lasting adhesion to the panel.

Visual Guide:

Video: Step-by-step installation guide for the decorative trim.

Before and after installation of carbon fiber trim

Image: Comparison of the car interior before and after installing the carbon fiber trim.

Close-up of carbon fiber material and adhesive backing

Image: Detail showing the stainless steel material with carbon fiber pattern and the red adhesive backing.

Close-up of adhesive backing

Image: Close-up view of the adhesive tape on the back of a trim piece.

Installed carbon fiber trim in car interior

Image: Display of the carbon fiber trim installed around the gear shift and cup holder area.

Installed silver trim in car interior

Image: Display of the silver trim installed around the gear shift and cup holder area.

4. Removal

If you need to remove the decorative trim, follow these steps:

  • Slow Peel: If removal is necessary, peel off the trim slowly from the edge.
  • Residue Cleaning: Occasionally, adhesive residue may remain on the car surface. Wipe it quickly with a soft cotton cloth dampened with 75% alcohol. This method will not harm the vehicle's surface. Do not use other harsh cleaning agents.

5. Operating

Once properly installed, the decorative frame integrates seamlessly with your car's interior. It is designed not to interfere with the original functions of the car's gear shift, cup holders, or control buttons.

Installed carbon fiber trim, close-up of buttons

Image: Close-up of the carbon fiber trim installed, showing accessibility to the electronic parking brake and auto-hold buttons.

Installed silver trim, close-up of buttons

Image: Close-up of the silver trim installed, showing accessibility to the electronic parking brake and auto-hold buttons.

6. Maintenance

To maintain the appearance and longevity of your decorative trim, follow these simple maintenance guidelines:

  • Cleaning: Wipe the surface with a soft, damp cloth. For stubborn marks, a mild car interior cleaner can be used.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemical agents, as these can damage the finish of the stainless steel.
  • Regular Inspection: Periodically check the trim for any signs of loosening or damage.

7. Troubleshooting

  • Adhesion Issues: If the trim does not stick properly, ensure the installation surface was thoroughly cleaned and dry before applying. Re-apply adhesion promoter if necessary and press firmly for an extended period.
  • Color/Style Discrepancy: If the received product's color or style does not match your expectation, please verify your order details and the product images provided before installation.
  • Damage During Installation: Handle the trim pieces carefully during installation to avoid scratches or bending.

8. Specifications

FeatureDetail
MaterialStainless steel
CompatibilityToyota Corolla E210 (2019-2024)
Item TypeInterior Mouldings
CertificationCE
Package Length41 cm
Package Width24 cm
Package Height2 cm
Package Weight0.312 kg

9. User Tips

  • Surface Preparation is Key: For optimal adhesion, ensure the car's interior surface is meticulously cleaned and completely dry before applying the trim. Any dust or residue can compromise the bond.
  • Firm Pressure: After positioning, apply firm and even pressure across the entire surface of the trim piece for a good duration to activate the adhesive fully.
  • Verify Compatibility: Always double-check the product's compatibility with your specific car model and year, especially regarding features like the parking brake type (e.g., mechanical vs. electronic), to ensure a perfect fit.
  • Color Matching: Pay close attention to the product images and descriptions to ensure the chosen color or pattern (e.g., 'A Black' vs. 'B Black' or 'Carbon Fiber') matches your desired aesthetic.

10. Warranty & Support

For any product support, inquiries, or warranty-related concerns, please contact the manufacturer or the seller directly using the information below:

Manufacturer Information:

  • Company: Guangzhou muqin auto supplies co., ltd
  • Address: Building 6, 1st Floor, Guangdong Tianjian Home Decoration Plaza Creative Park, No. 283 Tongsha Road, Tonghe Street, Baiyun District (Self-assigned No. 109, Building 6), Guangzhou, Guangdong Province, China
  • Email/Tel: 296976536@qq.com / 13418160904

EU Authorized Representative:

  • Representative: KD EUROPE
  • Address: Stara Debszczyzna 4, 16-424, Filipow, PL
  • Tel: +48-510181779
  • Email: Kdeurope.office@gmail.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.