1. Introduction
Thank you for choosing the DEKO DKLD05 Handheld Laser Distance Meter. This digital laser distance meter is designed to provide accurate and fast measurements for a wide range of applications, including home use, construction, and industrial settings. Its handy and compact design ensures ease of use, while its waterproof features contribute to the equipment's durability. This manual will guide you through the setup, operation, and maintenance of your device.
2. Safety Information
WARNING: Laser Radiation
- This device uses a Class II laser (630nm~670nm, <1mW).
- Do NOT stare directly into the laser beam.
- Avoid direct eye exposure.
- Do not aim the laser at people or animals.
- Use the device only as described in this manual.
3. Product Overview
Familiarize yourself with the components and controls of your laser distance meter:
- LCD Display: Shows measurements, modes, and battery status.
- Laser Indication: Icon indicating laser is active.
- Measured Value: Displays the current measurement.
- Horizontal Bubble Level: For ensuring accurate horizontal alignment.
- MEAS Button: Initiates a measurement.
- Memory Button: Accesses stored measurements.
- Add (+)/Subtract (-) Button: Performs addition or subtraction of measurements.
- Mute Button: Toggles the sound on/off.
- Menu Button: Accesses various settings and measurement modes.
- Measuring Reference / Unit Button: Changes the measurement reference point (front/rear) and switches units (m/ft/in).
- ON/OFF / Clear / Return Button: Powers the device on/off, clears current readings, or returns to the previous screen.
4. Setup
4.1. Battery Installation
- Locate the battery compartment on the back of the device.
- Slide the battery cover open.
- Insert two (2) 1.5V AAA batteries, ensuring correct polarity (+/-). Batteries are not included.
- Close the battery cover securely.
5. Operating Instructions
5.1. Power On/Off
- To turn on: Press the ON/OFF / Clear / Return button.
- To turn off: Press and hold the ON/OFF / Clear / Return button. The device will also automatically power off after 180 seconds of inactivity.
5.2. Basic Measurement
- Point the laser at the target.
- Press the MEAS button once to activate the laser.
- Press the MEAS button again to take a single measurement. The result will be displayed on the screen.
5.3. Continuous Measurement (MAX/MIN)
This mode allows you to track the maximum and minimum distances as you move the device.
- Press the MEAS button and then the Menu button to select continuous measurement mode.
- Move the device slowly. The display will show the current, maximum, and minimum distances.
- Press MEAS again to stop.
5.4. Measurement Modes
The device supports various measurement functions:
- Single Measurement: Standard distance measurement.
- Area Measurement: Calculates the area of a rectangle (length x width).
- Volume Measurement: Calculates the volume of a space (length x width x height).
- Pythagorean Measurement: Uses the Pythagorean theorem to calculate indirect distances (e.g., height of a wall). Includes Single Pythagoras, Twice Pythagoras Plus, and Twice Pythagoras Minus modes.
To select a mode, press the Menu button repeatedly until the desired mode icon appears on the display. Follow the on-screen prompts to take the necessary measurements.
5.5. Unit Switching
Press the Measuring Reference / Unit button to cycle through available units: meters (m), feet (ft), inches (in), and feet + inches (ft+in).
5.6. Mute Setting
The mute function allows you to turn the measurement beep on or off, which is useful for quiet environments like libraries or offices.
- Press the Mute button to toggle the sound on or off.
5.7. Historical Memory
The device can store up to 30 sets of historical measurements.
- Press the Memory button to view previous measurements.
- Use the Add (+)/Subtract (-) buttons to navigate through the stored data.
5.8. Applications
The DEKO DKLD05 is suitable for various measurement tasks, both indoors and outdoors.
6. Maintenance
- Keep the device clean and dry. Use a soft, damp cloth to wipe the exterior. Do not use harsh chemicals or abrasive cleaners.
- Ensure the laser lens is free from dust and debris for accurate measurements.
- When not in use for extended periods, remove the batteries to prevent leakage.
- Store the device within the specified storage temperature range of -10°C to +60°C (14°F to 140°F).
- Operate the device within the specified operating temperature range of 0°C to +40°C (32°F to 104°F).
7. Troubleshooting
If you encounter issues with your DEKO DKLD05, try the following:
- Device does not turn on: Check if batteries are inserted correctly and have sufficient charge. Replace batteries if necessary.
- Inaccurate measurements: Ensure the laser lens is clean. Verify the measurement reference point is set correctly. Make sure the device is stable and the target surface is suitable for laser reflection.
- Laser not visible: Check battery level. Ensure the device is turned on and the laser is activated.
- Display issues: Try turning the device off and on again. If the problem persists, replace batteries.
8. Specifications
| Feature | Specification |
|---|---|
| Measuring Range | 40m, 60m, 80m, 100m (model dependent) |
| Measuring Accuracy | ±2.0mm |
| Measuring Unit | m / ft / in / ft + in |
| Area Unit | m², ft² |
| Laser Type | 630nm~670nm, <1mW |
| Laser Class | Class II |
| Single Measurement Time | 0.25s |
| Laser Auto Switch-off | 30s |
| Instrument Auto Switch-off | 180s |
| Historical Memory | 30 sets |
| Operating Temperature | 0°C ~ +40°C (32°F ~ 104°F) |
| Storage Temperature | -10°C ~ +60°C (14°F ~ 140°F) |
| Battery Type | AAA (Alkaline), 2 x 1.5V (not included) |
| Net Weight | 90g |
| Dimensions | 115mm x 50mm x 30mm |
9. User Tips
- For optimal accuracy, ensure the laser has a clear line of sight to the target and that the target surface is flat and reflective.
- When measuring outdoors or in bright conditions, the effective range of the laser may be reduced.
- Always read the manual thoroughly before first use to understand all functions and safety precautions.
10. Warranty and Support
DEKO offers a comprehensive warranty and support for your DKLD05 Laser Distance Meter:
- One Year Warranty: The product comes with a one-year warranty from the date of purchase.
- 12 Months Free Replacement: In case of quality problems not caused by user error, a free replacement is offered within 12 months.
- Lifetime Technical Support: DEKO provides free lifetime technical support for this product.
Warranty Exclusions: The warranty does not cover:
- Man-made damage or violent use.
- Repairs performed without authorization.
- Normally worn parts.
For warranty claims or technical assistance, please contact DEKO customer service. During business hours, after-sales issues are typically handled within 24 hours.