HIROYASU CB-1011

Contents

Hiroyasu CB-1011 Mini 11 Meter CB Mobile Radio User Manual

Model: CB-1011

Introduction

The Hiroyasu CB-1011 is a compact and lightweight 11-meter CB mobile radio designed for reliable communication across various regions. It supports multiple CB bands and offers both FM and AM modulation modes, along with essential features like squelch control, RF gain, and emergency channels. This manual provides detailed instructions for setting up, operating, and maintaining your CB-1011 radio.

Safety Information

  • Read all instructions carefully before operating the radio.
  • Do not operate the radio in explosive atmospheres (e.g., near flammable gas, dust particles, metallic powders).
  • Ensure proper antenna connection before transmitting to prevent damage to the radio.
  • Use only the specified power supply (12V DC).
  • Keep the radio away from water and moisture.
  • Do not attempt to open or modify the radio. Refer all servicing to qualified personnel.

Package Contents

Verify that all items are present in your package:

  • 1 × Hiroyasu CB-1011 CB Radio Body
  • 1 × Microphone Speaker with DC 12V Input Cigarette Power Cable
  • 1 × Mounting Bracket
  • 1 × Microphone Hanger
  • 2 × Adjusting Screws
  • 4 × Screws for Bracket
  • 2 × Pads for Bracket
  • 2 × Screws
  • 1 × Spare Fuse
  • 1 × User Manual
Hiroyasu CB-1011 package contents
Image: Contents of the Hiroyasu CB-1011 package.

Product Overview

The Hiroyasu CB-1011 is a compact CB radio designed for ease of use and portability. Below is a diagram of its main components and controls.

Hiroyasu CB-1011 front and rear panel diagram
Image: Front and rear panel diagram of the CB-1011 radio.
  1. **SQ (Squelch Control) / A/F (SQ/ASQ Switching Key):** Adjusts the squelch level or switches between manual and automatic squelch.
  2. **RFG (RF Gain Control):** Adjusts the receiver's sensitivity to incoming signals.
  3. **A/F (AM/FM Mode Selecting / Scan Key):** Switches between AM and FM modulation modes, or initiates channel scan.
  4. **EMG (CH9, CH19 Emergency / Keypad Lock):** Accesses emergency channels 9 and 19, or locks/unlocks the keypad.
  5. **Power/Volume Control Knob:** Turns the radio on/off and adjusts the audio volume.
  6. **LCD Display:** Shows current channel, mode, and other status indicators.
  7. **External Speaker Jack:** Connects an optional external speaker.
  8. **Antenna Jack:** Connects the CB antenna.
Hiroyasu CB-1011 microphone controls
Image: Microphone keypad lock and channel UP/DN buttons.

Setup Instructions

  1. **Mounting:** Use the provided mounting bracket and screws to securely install the radio in your vehicle. Ensure it is in a location that does not obstruct driving or airbag deployment.
  2. **Antenna Connection:** Connect a suitable CB antenna to the Antenna Jack (8) on the rear of the radio. Ensure the connection is tight.
  3. **Power Connection:** Connect the DC 12V input cigarette power cable to your vehicle's 12V cigarette lighter socket. The radio is designed to be powered by a 12V car cigarette lighter.
  4. **Microphone Connection:** Plug the microphone into the dedicated jack on the front panel.
  5. **External Speaker (Optional):** If desired, connect an external speaker to the External Speaker Jack (7) for enhanced audio output.
Hiroyasu CB-1011 powered by 12V car cigarette lighter
Image: Powering the CB-1011 radio using a 12V car cigarette lighter.

Operating Instructions

This section details the functions and controls of your Hiroyasu CB-1011 radio.

1. Power On/Off and Volume Control

  • To turn the radio ON, rotate the Power/Volume control knob (5) clockwise. The LCD display will light up.
  • Continue rotating clockwise to increase the volume. Rotate counter-clockwise to decrease volume or turn OFF the radio.

2. CB Band Selection

The CB-1011 supports 8 different country CB bands. To select the appropriate band for your region:

  • With the radio OFF, press and hold the **SQ** button (1) and the **A/F** button (3) simultaneously.
  • While holding these buttons, turn the radio ON using the Power/Volume control knob (5).
  • The display will show the current CB band code (e.g., EU, PL, DE, US).
  • Use the channel UP/DN buttons on the microphone to cycle through the available band codes.
  • Once your desired band is displayed, turn the radio OFF and then ON again to save the selection.
Hiroyasu CB-1011 with supported CB bands
Image: CB-1011 displaying supported CB bands for various countries.
Country CB Bands Table
Table: Country CB Bands and their channel/mode configurations.

3. Channel Selection

  • Use the UP/DN buttons on the microphone to change channels.
  • Alternatively, rotate the channel selector knob (if present, though not explicitly labeled as such in the diagram, the video shows a rotary knob for channel selection) to select channels.

4. FM/AM Mode Switch

  • Press the **A/F** button (3) to switch between FM (Frequency Modulation) and AM (Amplitude Modulation) modes. The selected mode will be displayed on the LCD.

5. Squelch Control (SQ/ASQ)

Squelch eliminates background noise when no signal is being received.

  • **Automatic Squelch (ASQ):** Press the **SQ** button (1) briefly to activate ASQ. The display will show "AQ". Rotate the Power/Volume knob to adjust the ASQ level (0.0 to 9.9). A higher number means stronger squelch.
  • **Manual Squelch:** Press the **SQ** button (1) again to switch to manual squelch. The display will show "SQ". Rotate the Power/Volume knob to adjust the manual squelch level (0.0 to 9.9). Adjust until background noise disappears.
Hiroyasu CB-1011 demonstrating Squelch control
Image: Visual representation of Manual/Automatic Squelch level control.

6. RF Gain Control (RFG)

  • Press the **RFG** button (2) to activate RF Gain control. The display will show "RFG".
  • Rotate the Power/Volume knob to adjust the RF Gain level (0 to 60). This controls the receiver's sensitivity to incoming signals. Lowering the RF gain can help reduce interference from strong nearby signals.

7. High/Low Power Select (PH/PL)

The radio allows selection between high (8W) and low (4W) transmit power.

  • With the radio ON, press and hold the **EMG** button (4) and the **RFG** button (2) simultaneously.
  • The display will show "PH" for High Power (8W) or "PL" for Low Power (4W).
  • Release the buttons when the desired power level is displayed.
Hiroyasu CB-1011 High/Low power select
Image: Instructions for selecting High (8W) or Low (4W) power.

8. Emergency Channels (CH9/CH19)

  • Press the **EMG** button (4) to quickly switch to emergency channel 9 (CH9).
  • Press it again to switch to emergency channel 19 (CH19).
  • Press a third time to return to the previously selected channel.

9. Channel Scan

  • To initiate a channel scan, press and hold the **A/F** button (3) until "SC" appears on the display. The radio will scan through all available channels.
  • To stop scanning, press the **A/F** button (3) again or any other button.

10. Keypad Lock

  • To lock the keypad, press and hold the **EMG** button (4) until a lock icon appears on the display. This prevents accidental changes to settings.
  • To unlock, press and hold the **EMG** button (4) again until the lock icon disappears.

11. Factory Default Reset

  • To restore the radio to its factory default settings, turn the radio OFF.
  • Press and hold the **EMG** button (4) and the **RFG** button (2) simultaneously.
  • While holding these buttons, turn the radio ON. The display will briefly show "PL" then reset to default settings.

Specifications

Detailed technical specifications for the Hiroyasu CB-1011 radio:

CategoryParameterValue
GeneralModulation ModeAM/FM
Frequency Range26.565-27.99125MHz
Frequency Tolerance±5.0ppm
Input Voltage13.8V±5%
Dimensions109*104*25mm
Weight421g
Frequency ControlPLL Synthesizer
Operating Temperature Range-20°C ~ +50°C
Current DrainTransmit2A Max.
Receiver Squelched0.3A
Receiver Vol Max.0.8A
AntennaAntenna ConnectorUHF, SO239
TransmitterPower Output8 Watts FM/AM
Transmission InterferenceInferior to 4nW (-54dBm)
Frequency Response300-3000Hz
Modulated Signal DistortionInferior to 5%
OutputOutput Impedance50 ohms
ReceiverSensitivityLess than 1uV for 10dB (S+N)/N
Image Rejection70dB
Adjacent Channel Rejection60dB
IF Frequency1st 10.695MHz, 2nd 455KHz
Automatic Gain Control (AGC)Less than 10dB change in audio output for inputs from 10 to 50000uV
SquelchLess than 1uV
AudioAudio Output Power1 Watts
Frequency Response300-3000Hz
Hiroyasu CB-1011 detailed specifications table
Image: Detailed technical specifications for the CB-1011 radio.

Frequency Tables

Refer to the following tables for detailed frequency information across different channels and bands.

Frequency Table 1 for CB-1011
Table: Frequency Table 1 (Channels 1-40) for various country bands.
Frequency Table 2 for CB-1011
Table: Frequency Table 2 (Channels 41-80) for various country bands.

Troubleshooting

  • **No Power:** Check the 12V power connection and the fuse in the cigarette lighter plug. Ensure the Power/Volume knob is turned ON.
  • **No Reception/Transmission:** Verify the antenna is properly connected. Check the selected CB band and ensure it matches your region. Adjust squelch (SQ/ASQ) and RF Gain (RFG) settings.
  • **Poor Audio Quality:** Check microphone connection. Adjust volume and squelch levels. Ensure the external speaker (if used) is functioning correctly.
  • **Buttons Unresponsive:** Check if Keypad Lock is active (indicated by a lock icon on the display). Unlock the keypad if necessary.

Maintenance

  • **Cleaning:** Use a soft, dry cloth to clean the radio's exterior. Do not use abrasive cleaners or solvents.
  • **Antenna Care:** Regularly inspect your antenna and its connections for wear or damage. A damaged antenna can affect performance.
  • **Storage:** When not in use for extended periods, store the radio in a cool, dry place.

User Tips

  • **Antenna Selection:** For optimal performance, ensure you use an antenna specifically designed for the 11-meter CB band (26.565-27.99125MHz). The type of antenna (e.g., mobile, base station) should match your intended use (vehicle or home).
  • **Frequency Expansion:** The radio operates within the specified CB frequency range. Any attempts to expand frequencies beyond this range may require specialized knowledge and could violate local regulations.
  • **Signal Clarity:** Experiment with both AM and FM modes to find the clearest signal depending on your environment and the transmitting station. FM generally offers better clarity in noisy conditions.

Product Demonstration Video

Watch this video for a visual guide on the product's features and basic operation.

Video: Unboxing and demonstration of the Hiroyasu CB-1011 CB Mobile Radio features.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.