JIKONG JK-BD4A17S4P

Contents

JIKONG JK-BD4A17S4P Smart Active Balance BMS User Manual

Model: JK-BD4A17S4P

For Li-Ion, LiFePo4, and LTO Batteries (8S-17S)

1. Introduction

The JIKONG JK-BD4A17S4P is an intelligent active balance Battery Management System (BMS) designed for 8S-17S Li-Ion, LiFePo4, and LTO battery packs. It features a 0.4A active balancing current, 40A continuous charge/discharge current, and built-in Bluetooth for APP control and monitoring. This manual provides essential information for the proper installation, operation, and maintenance of your BMS.

2. Product Features

  • Smart Active Balance: 0.4A active balancing current for optimal cell health.
  • Wide Compatibility: Supports 8S-17S configurations for Li-Ion, LiFePo4, and LTO battery types.
  • High Current Capacity: 40A continuous charge and discharge current.
  • Integrated Bluetooth: Seamless connectivity for APP control and real-time monitoring on iOS, Android, and HarmonyOS devices.
  • Multi-interface Display: Supports APP and PC external display screens.
  • Robust Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection.
  • Advanced Interfaces: Features GPS, RS485, CAN, Display, Heating, and NTC interfaces for comprehensive system integration.
  • High-Performance MCU: Equipped with a main control chip for reliable operation.
  • Durable Construction: Full aluminum alloy shell provides excellent heat dissipation.
  • Precision Monitoring: Voltage detection accuracy of ±0.015V and short circuit protection response within 10-500μs.
JIKONG Intelligent Active Balance Power Management System (BMS) overview
Overview of the JIKONG Intelligent Active Balance Power Management System (BMS).
Rich interface diagram for JIKONG BMS
Detailed diagram showing the rich interfaces available on the BMS, including CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer.
Internal components and cooling of JIKONG BMS
Exploded view illustrating the high-quality internal components, including MOS, Jikong MCU, NTC, sampling lines, and cooling aluminum alloy casing.

3. Package Contents

Verify that all items are present in your package:

  • BMS x 1
  • Switch x 1 (long 50cm)
  • NTC x 1 (long 40cm)
  • Sampling line B x 1 (long 70cm)
  • Sampling line A x 1 (long 70cm)
JIKONG BMS Packing List
Visual representation of the items included in the JIKONG BMS package.

4. Specifications

AttributeValue
Model NumberJK-BD4A17S4P
Accessory TypeBattery Accessories
OriginMainland China
CertificationCE, FCC
Battery Strings Supported8S-17S
Battery Types SupportedLi-Ion, LiFePo4, LTO
Continuous Charge Current40A
Continuous Discharge Current40A
Max Discharge Current (2 min)200A
Balance FunctionActive Balanced BMS
Balance Current (Full State On)0.4A
Charge and Discharge PortCommon Port BMS
Overcharge ProtectionYes (Adjustable 1-5V)
Over Discharge ProtectionYes (Adjustable 1-5V)
Overcurrent ProtectionYes
Short Circuit ProtectionYes (Response 10-500μs)
Voltage Detection Accuracy±0.015V
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS/HarmonyOS
Charger IncludedNo
Battery IncludedNo
JIKONG Product Specifications Table
Detailed product specifications table for various JIKONG BMS models, including the JK-BD4A17S4P.

5. Setup and Installation

Careful wiring is crucial for the safe and correct operation of the BMS. Please follow the diagrams below precisely. Incorrect wiring can damage the BMS, battery pack, or connected equipment.

5.1 General Connection Points

  • B-: Connects to the total negative electrode of the battery pack.
  • P-: Connects to the negative terminal of the load/charger.
  • B+: Connects to the total positive electrode of the battery pack.
  • Sampling Lines (A & B): Connect to individual cell voltage taps as per the specific string configuration.
  • NTC: Connects to the temperature sensor for thermal monitoring.
  • Switch: Connect the provided switch for power control.
  • Display/Key: For external display or key switch connections.

5.2 Wiring Diagrams

Refer to the following diagrams for typical wiring configurations. Always match the sampling lines to the correct cell voltage taps (B1, B2, B3, etc.) starting from the negative end of the battery pack.

Wiring diagram for 24-string cells
Wiring method for a 24-string cell configuration. Note the connections for B-, P-, P+, and individual cell sampling lines (B1-B24) and NTC.
Wiring diagram for 16-string cells
Wiring method for a 16-string cell configuration. Similar to the 24-string, but adapted for fewer cells (B1-B16).

5.3 APP Installation

The BMS supports control and monitoring via a mobile application. Scan the QR code on the BMS unit or refer to the official JIKONG website (www.jk-bms.com) to download the latest version of the APP for your iOS, Android, or HarmonyOS device.

JIKONG BMS APP support for iOS, Android, HarmonyOS
The JIKONG BMS APP is compatible with iOS, Android, and HarmonyOS operating systems.

6. Operating Instructions

6.1 Powering On/Off

Use the provided soft switch to power on or power off the BMS. Ensure all connections are secure before powering on.

6.2 APP Control and Monitoring

Once the APP is installed and connected via Bluetooth, you can:

  • Monitor real-time battery voltage, current, temperature, and State of Charge (SOC).
  • View individual cell voltages and their balance status.
  • Configure protection parameters such as overcharge/over-discharge voltage limits and overcurrent thresholds.
  • Initiate or monitor the active balancing process.
  • Access historical data and diagnostic information.

6.3 Active Balancing

The BMS continuously monitors cell voltages and actively balances them to ensure all cells are at a similar voltage level, extending the overall lifespan and performance of the battery pack. This process is automatic but can be monitored via the APP.

7. Maintenance

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Temperature Monitoring: Ensure the BMS operates within its specified temperature range. The aluminum alloy shell is designed for efficient heat dissipation, but adequate ventilation is still important.
  • Software Updates: Keep the mobile APP updated to the latest version to benefit from new features and performance improvements.
  • Cleanliness: Keep the BMS free from dust and moisture.

8. Troubleshooting

  • BMS Not Powering On: Check the main battery connections (B-, B+) and the soft switch connection. Ensure the battery pack has sufficient voltage.
  • No Bluetooth Connection: Verify Bluetooth is enabled on your mobile device. Ensure the BMS is powered on and within range. Restart the APP or BMS if necessary.
  • Protection Activated (e.g., Overvoltage, Undervoltage, Overcurrent): The BMS will automatically cut off power to protect the battery. Check the battery cell voltages, load current, and charging voltage. The APP will usually indicate the specific protection event. Address the underlying cause before attempting to reset or resume operation.
  • Unbalanced Cells: If the APP shows significant voltage differences between cells, ensure all sampling lines are correctly connected and making good contact. The active balancing function should work to equalize cells over time.
  • Unusual Heat: If the BMS feels excessively hot, check for short circuits, overcurrent conditions, or inadequate ventilation.

9. User Tips

  • Always double-check all wiring connections against the provided diagrams before applying power.
  • Utilize the mobile application for real-time monitoring and configuration to get the most out of your BMS.
  • Ensure your battery pack is assembled with cells of similar capacity and internal resistance for optimal performance and balancing.
  • Provide adequate ventilation around the BMS to facilitate proper heat dissipation, especially during high charge/discharge cycles.

10. Warranty and Support

For warranty claims, technical support, or service inquiries, please contact your original point of purchase or the JIKONG customer service team. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.