1. Introduction
This manual provides essential information for the safe and effective assembly, operation, and maintenance of your HOMCOM Foot Bed Stool. Please read these instructions carefully before use and retain them for future reference.
HOMCOM Foot Bed Stool (Gray)
HOMCOM Foot Bed Stool (Green)
2. Setup and Assembly
The HOMCOM Foot Bed Stool requires basic assembly. Please ensure all components are present before beginning. It is recommended to assemble the stool on a soft, clean surface to prevent scratches.
2.1 Package Contents
- Stool body (upholstered seat)
- Steel legs (4 pieces)
- Protective foot pads (pre-attached or separate, check packaging)
- Assembly hardware (screws, Allen key, etc.)
2.2 Assembly Steps
- Carefully unpack all components and verify against the package contents list.
- Place the stool body upside down on a soft, flat surface.
- Attach each steel leg to the designated mounting points on the underside of the stool body using the provided hardware. Ensure screws are tightened securely.
- Once all legs are attached, carefully turn the stool upright.
- Verify that the protective foot pads are securely attached to the bottom of each leg to prevent floor scratches.
Stable steel legs with protective pads
3. Operating Instructions
Your HOMCOM Foot Bed Stool is designed for versatile use in various home environments.
3.1 Intended Use
- Bed Bench: Place at the foot of your bed for seating or as a decorative accent.
- Entryway Bench: Ideal for sitting while putting on or taking off shoes.
- Living Room/Office Seating: Provides additional seating or can function as an ottoman.
3.2 Weight Capacity
The stool is designed to support a maximum load of 120 kg (approximately 264 lbs). Do not exceed this weight limit to ensure stability and prevent damage.
3.3 Placement Considerations
Ensure the stool is placed on a flat, stable surface. The protective foot pads are designed to prevent scratches on your flooring.
Bed compatibility diagram: The 100cm bench is suitable for various bed widths.
4. Maintenance
Proper care will extend the life and appearance of your stool.
- Cleaning: For general cleaning, wipe the velvet upholstery with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Dusting: Regularly dust the steel legs with a soft, dry cloth.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the upholstery fabric.
5. Troubleshooting
If you encounter any issues with your stool, consider the following:
- Wobbling: Check that all leg screws are securely tightened. Ensure the stool is on a flat, even surface.
- Damage: If any part of the stool is damaged, discontinue use and contact customer support for assistance.
6. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | HOMCOM |
| Color Options | Gray, Green |
| Material | Velvet (100% polyester), Foam, Steel |
| Total Measurements (L x W x H) | 100 x 36 x 45 cm |
| Seat Measurements (L x W x H) | 100 x 36 x 45 cm |
| Seat Thickness | 13 cm |
| Maximum Load Capacity | 120 kg |
| Installation Method | Assembly |
| Style | Minimalist Modern |
| Specific Use | Home Stool & Ottoman |
| General Use | Home Furniture |
| Type | Living Room Furniture |
| Appearance | Modern Morocco |
| Package Dimensions (L x W x H) | 103 x 38 x 15 cm |
| Package Weight | 8.6 kg |
| Reference Numbers | 831-691V00GY (Gray), 831-691V00GN (Green) |
Overall dimensions of the stool
7. User Tips
No specific user tips were available from customer reviews or Q&A for this product.
General Tip:
If you intend to use the stool at the foot of a bed, measure your bed's width before purchasing to ensure optimal compatibility and fit.
8. Warranty and Support
For information regarding warranty coverage, returns, or customer support, please refer to the seller's policies or contact the seller directly. Keep your purchase receipt as proof of purchase.
