1. Introduction
Thank you for choosing the Y10 Bluetooth Motorcycle Helmet Intercom. This device is designed to enhance your riding experience by providing seamless communication, music playback, and voice assistant functionality. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
2. Safety Warnings and FCC Compliance
Please observe the following safety precautions:
- Do not expose the product to open flames to prevent explosion.
- Do not disassemble the product. Disassembly may cause damage to the internal electronics.
- Avoid contact with sharp objects, as they can damage the product.
- If not in use for an extended period, store the device in a dry place.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3. Package Contents
Ensure all items are present in your package:
- 1 or 2 x Y10 Helmet Intercom Unit (depending on your choice)
- 1 x Base
- 1 x Integrated Full/Half Helmet Microphone (Soft or Hard Mic, depending on your choice)
- 1 x Charging Cable (Type-C)
- 1 x User Manual (this document)
- 1 x Velcro Installation Package
4. Specifications
| Feature | Specification |
|---|---|
| Model Name | Y10 |
| Bluetooth Version | V5.3 |
| Standby Time | Approx. 160 hours (Dormant state lasts 18 months) |
| Intercom Distance | 300M (without obstructions) |
| Working Hours (Continuous Play) | Up to 72 hours (25H music at maximum volume) |
| Call Time | 30 hours |
| Battery Capacity | 2000mAh Lithium Battery |
| Charging Time | ≤2.5 hours (Type-C fast charging) |
| Frequency Response | 100Hz~18KHz |
| Waterproof Rating | IPX6 Dust and Mud Splash Resistant |
| Special Features | Voice control, Waterproof, Noise Reduction (DSP & CVC Intelligent Noise Reduction) |
| Applicable Helmet Type | Half Helmet, MODULAR, MOTOCROSS, Open face, Full Face, Universal |
| Power Supply Mode | Built-in Battery |
| Connection Mode | Bluetooth |
| Maximum Number of Speakers | 2 (for intercom) |
| Certifications | CE, RoHS, FCC, CCC |
| Item Weight | 180g |
| Item Dimensions (L x W x H) | 3.35inch x 1.38inch x 0.79inch |
| Microphone Type | Soft/Hard Mic options |
5. Setup and Installation
5.1 Choosing Your Microphone
- Soft Mic: Typically suitable for full-face helmets.
- Hard Mic: Generally used for open-face or modular helmets.
5.2 Mounting the Intercom Unit
Use the provided mounting clips and Velcro installation package to securely attach the intercom unit to your helmet. Ensure the unit is positioned where it is easily accessible for button operation but does not obstruct your vision or helmet functionality.
6. Operation
6.1 Function Keys Overview
The Y10 intercom features physical pressure buttons designed for easy operation even while wearing gloves.
- '+' Button: Short press for Volume Up. Long press for Next Song.
- Microphone Button: Short press to activate Voice Assistant. Long press to Power On/Off. Short press to enter Intercom Mode. Long press (in intercom mode) to enter transmitting mode for pairing.
- '-' Button: Short press for Volume Down. Long press for Previous Song.
6.2 Power On/Off
To power on or off the device, long press the Microphone Button.
6.3 Bluetooth Pairing (First Device)
When the device is powered on for the first time, it will automatically enter Bluetooth pairing mode. Search for 'Y10' on your mobile phone's Bluetooth settings and connect.
6.4 Connecting Two Devices Simultaneously (Intelligent One-Two)
The Y10 supports connecting to two Bluetooth devices at the same time. This allows you to freely switch between devices to listen to music, receive navigation instructions, and answer calls.
6.5 Intercom Pairing and Communication
For two Y10 units to communicate, one unit must be in intercom receiving mode and the other in intercom transmitting mode before pairing.
- Power On Both Units: Ensure both Y10 intercom units are powered on.
- Enter Intercom Mode: Short press the Microphone Button on both units to enter intercom mode. At this point, both units will be in intercom receiving mode.
- Initiate Pairing: Long press the Microphone Button on one of the units. This unit will enter intercom transmitting mode for pairing.
- Confirmation: The green indicator light will blink quickly on the transmitting unit (emission mode) and slowly on the receiving unit. Once connected, the green indicator will blink once every 1 second on both units, and a voice prompt will confirm the connection. Intercom conversation can now begin.
6.6 Voice Assistant
The Y10 supports voice assistant functions (e.g., Siri, Google Assistant). Short press the Microphone Button to wake up your mobile phone's voice assistant. This allows for hands-free operation, reducing errors and improving convenience.
7. Maintenance
7.1 Cleaning
Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
7.2 Waterproofing
The Y10 intercom is IPX6 rated, meaning it is dust and mud splash resistant. It is designed to withstand rain, snow, and dust during your motorcycle journey. However, it is not recommended to submerge the device in water for extended periods.
7.3 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Charge the device using the provided Type-C cable. The device supports fast charging, providing 3 hours of life from a 20-minute charge.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Cannot connect to another intercom unit. | Ensure both units are powered on. Follow the intercom pairing steps carefully: one unit must be in receiving mode and the other in transmitting mode. Long press the microphone button on one unit to initiate transmitting mode for pairing. |
| Interference with radio/TV reception. | Reorient or relocate the receiving antenna. Increase the separation between the intercom unit and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. |
| Device does not power on. | Ensure the battery is charged. Connect the device to the charging cable and allow it to charge for at least 30 minutes before attempting to power on again. |
| Voice assistant not responding. | Ensure the intercom is connected to your mobile phone via Bluetooth. Short press the microphone button to activate the voice assistant. Check your phone's settings to ensure the voice assistant is enabled and accessible via Bluetooth devices. |
| Poor audio quality or noise. | Ensure the microphone is correctly positioned and not obstructed. Check for any loose connections. The device features DSP & CVC intelligent noise reduction, but extreme wind noise or external interference can still affect quality. |
9. User Tips
- Intercom Pairing: Many users find intercom pairing tricky initially. Remember that for two units to connect, one must be set to 'receiving' and the other to 'transmitting' mode. Follow the specific steps in section 6.5 carefully.
- Glove-Friendly Operation: The physical buttons are designed to be used with gloves. Take a moment to familiarize yourself with their positions and functions before riding.
- Battery Life: While the device boasts long battery life, charging it regularly, especially before long trips, is recommended to avoid unexpected power loss.
- Multi-Device Connectivity: Take advantage of the 'Intelligent One-Two' feature to connect both your phone and a GPS device simultaneously for a seamless experience.
10. Warranty and Support
For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:
For any issues not covered in this manual, please contact the seller or manufacturer's customer support.
