Hti HT-02, HT-02D, HT-18, HT-175

Contents

Handheld Thermal Imaging Camera User Manual

Models: HT-02, HT-02D, HT-18, HT-175

Brand: Hti

1. Introduction

This manual provides detailed instructions for the safe and effective operation of your Hti Handheld Thermal Imaging Camera. These devices are designed for various applications including industrial construction, fault and leak detection, building inspection, electrical inspection, auto repair, floor heating detection, fire-fighting, archaeology, traffic, farming, and electronic manufacturing. The thermal imager combines surface temperature measurement with real-time thermal imaging to quickly identify problem areas.

HT-18 Thermal Imager with packaging and carrying case

Figure 1: HT-18 Thermal Imager with packaging and carrying case.

HT-02/HT-02D Thermal Imagers with packaging and carrying case

Figure 2: HT-02/HT-02D Thermal Imagers with packaging and carrying case.

2. Safety Information

Please read and understand all safety warnings and operating instructions before using this product. Failure to do so may result in injury or damage to the device.

  • Do not point the camera directly at strong light sources (e.g., the sun, lasers) as this may damage the sensor.
  • Keep the device dry. Do not expose it to moisture or rain.
  • Avoid dropping the device or subjecting it to strong impacts.
  • Do not attempt to disassemble or modify the device. Repairs should only be performed by authorized personnel.
  • Use only specified batteries and charging accessories.
  • Dispose of batteries and the device according to local regulations.

3. Package Contents

Verify that all items are present in your package:

  • 1 x Thermal Infrared Imager (HT-02, HT-02D, HT-18, or HT-175 model)
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Carry Pouch
  • 1 x Carry Pouch Strap (for some models)
  • 1 x SD Card (4G, for some models)
  • 1 x Cardboard Package Box
HT-18 Thermal Imager with included accessories

Figure 3: HT-18 Thermal Imager and accessories.

HT-175 Thermal Imager with included accessories

Figure 4: HT-175 Thermal Imager and accessories.

4. Product Features

  • Display: 2.4-inch or 3.2-inch full-color screen (model dependent) for detailed infrared images.
  • Resolution: Infrared image resolution varies by model (e.g., 220x160 for HT-18, 60x60 for HT-02, 32x32 for HT-02D/HT-175). Visible image resolution is typically 0.3 megapixels.
  • Temperature Range: -20°C to 300°C (-4°F to 572°F).
  • Measurement Accuracy: ±2% or ±2°C (±4°F).
  • Color Palettes: Multiple options including Rainbow, Iron Red, Cold Color, Black & White, and White & Black.
  • Image Storage: Built-in 4GB SD card (for some models) for storing images in JPG or BMP format.
  • Connectivity: Micro USB2.0 for charging and data transfer.
  • Power: Built-in rechargeable 18650 battery (for HT-18) or 4x 1.5V AA batteries (for HT-02/HT-02D/HT-175, not included).
  • Automatic Power-off: Adjustable settings (e.g., 5 minutes, 20 minutes, or disabled).
  • Ergonomic Design: Comfortable handheld grip for extended use.

5. Setup

5.1 Battery Installation/Charging

For models using AA batteries (HT-02, HT-02D, HT-175):

  1. Locate the battery compartment on the device.
  2. Open the compartment and insert 4x 1.5V AA batteries, ensuring correct polarity.
  3. Close the battery compartment securely.

For models with built-in rechargeable battery (HT-18):

  1. The device comes with a built-in 18650 rechargeable battery.
  2. Connect the device to a power source using the provided USB cable. The battery indicator on the screen will show charging status.
  3. A full charge typically provides up to 6 hours of operation.

Video 1: Product demonstration showing battery installation and charging for HT-18.

5.2 Initial Power On

Hold down the power button (usually marked with a 'U' symbol) to turn the device on. The screen will display the thermal image once powered on.

Hand holding HT-18, showing the menu interface

Figure 5: Powering on the device and navigating the menu.

6. Operating Instructions

6.1 Power On/Off

  • To power on, press and hold the power button until the screen illuminates.
  • To power off, press and hold the power button until the screen turns off.

6.2 Basic Measurement

Once powered on, the device will display a real-time thermal image. The crosshair in the center indicates the spot measurement area, showing the temperature at that point. The emissivity setting (e.g., e=0.95) is displayed on the screen.

HT-02 in use, showing a thermal image of a hand

Figure 6: Thermal image of a hand, demonstrating real-time temperature display.

6.3 Menu Navigation

Use the 'MENU', 'SELECT', and arrow keys to navigate through the device's settings and functions.

6.4 Color Palettes

The device offers several color palettes to visualize thermal data. You can select the most suitable palette for your application:

  • Spectra
  • Iron Red
  • Cool
  • White Glow (Gray Scale)
  • Black Glow (Gray Scale)

6.5 Image Capture and Storage

Press the capture button (often labeled 'ENTER' or a dedicated camera icon) to save the current thermal image. Images are stored on the internal 4GB SD card (if applicable) or internal memory. You can view captured images through the 'Images' option in the menu.

6.6 Data Transfer

Connect the device to a computer using the Micro USB2.0 cable to transfer captured images for further analysis or reporting.

7. Product Applications

The Hti Thermal Imager is a versatile tool suitable for a wide range of diagnostic and inspection tasks:

  • Building Inspection: Detecting insulation deficiencies, moisture intrusion, and HVAC issues.
  • Electrical Inspection: Identifying overheating components in electrical panels, circuits, and motors.
  • Auto Repair: Diagnosing engine overheating, brake issues, and other thermal anomalies in vehicles.
  • Floor Heating Detection: Locating heating pipes and identifying blockages or leaks in underfloor heating systems.
  • Industrial Maintenance: Monitoring machinery for abnormal heat signatures, preventing equipment failure.
  • Leak Detection: Pinpointing hidden water leaks by observing temperature differences.
Examples of product applications including floor heating, distribution box, automobile, electrical equipment, motor, and power fault detection

Figure 7: Various applications of the thermal imager.

8. Specifications

Detailed specifications table for HT-02D thermal imager

Figure 8: Detailed specifications for HT-02D model.

ParameterValue (HT-18)Value (HT-02/HT-02D/HT-175)
Display Screen3.2'' full-color screen2.4'' full-color screen (HT-02/HT-02D), 2.0'' color screen (HT-175)
Infrared Image Resolution220×16060×60 (HT-02), 32×32 (HT-02D/HT-175)
Visible Image Resolution0.3 million pixel0.3 million pixel
Temperature Measurement Range-20°C to 300°C (-4°F to 572°F)-20°C to 300°C (-4°F to 572°F)
Measurement Precision±2.5°C or ±2.5%±2% or ±2°C (±4°F)
Thermal Sensitivity0.07°C0.15°C
Wavelength Range8-14μm8-14μm (HT-02/HT-02D), 8-11.5μm (HT-175)
Field Angle/Shortest Focus Length27°×35°/0.5m20×20/0.5m
EmissivityAdjustable from 0.1 to 10.0Adjustable from 0.1 to 10.0
Focus ModeFixedFixed
Image Capture Frequency8Hz6Hz
Image FormatJPGBMP
Power SupplyBuilt-in rechargeable 18650 battery4 * 1.5V AA battery (HT-02/HT-02D), 3×AAA alkaline battery (HT-175)
Battery Life6 Hours6 Hours
Auto Power-off Time5 minutes/20 minutes/disabled12 Minutes
Operating Temperature0°C to 50°C (32°F to 122°F)-5°C to 40°C (23°F to 104°F)
Storage Temperature-40°C to 80°C (-40°F to 176°F)-20°C to 50°C (-4°F to 122°F)
Relative Humidity<85%RH10%RH to 80%RH
Dimensions (L×W×H)90×105×223mm21.2×9.5×6.2cm (HT-02/HT-02D), 165×58×64mm (HT-175)
Weight289g320g (HT-02/HT-02D), 231.2g (HT-175)

9. User Tips

  • Model Differences: The primary difference between HT-02 and HT-02D models lies in their infrared image resolution. HT-02 features a 60x60 resolution, while HT-02D has 32x32. Other functionalities are generally similar across these models.
  • Battery Issues: If your device displays a "low charge" warning and turns off even after inserting charged batteries, ensure you are using the correct type and voltage of batteries as specified for your model. For rechargeable models, verify the charging cable and adapter are functioning correctly. If the issue persists, the battery itself might be faulty or incompatible.
  • Optimal Viewing: Experiment with different color palettes to find the best visualization for the specific thermal patterns you are trying to identify.
  • Emissivity Adjustment: For accurate temperature readings, adjust the emissivity setting to match the material you are inspecting. Consult a table of common material emissivities if unsure.

10. Troubleshooting

Device does not power on:
Check battery installation (for AA models) or ensure the rechargeable battery is fully charged (for built-in battery models). If using AA batteries, ensure they are new and correctly oriented. For rechargeable models, try a different USB cable or power adapter.
Image is blurry or unclear:
Ensure the lens is clean and free from dust or smudges. The device has a fixed focus, so ensure you are within the optimal focal distance (e.g., 0.5m).
Inaccurate temperature readings:
Verify that the emissivity setting is correctly adjusted for the material being measured. Environmental factors like strong air currents or reflective surfaces can also affect accuracy.
Cannot save images:
Check if the internal memory or SD card (if applicable) is full. Delete unnecessary images or replace the SD card. Ensure the device is not in a mode that prevents saving.
Device shuts down unexpectedly:
This could indicate low battery. Recharge or replace batteries. Check the auto power-off settings to ensure it's not set to a short duration.

11. Care and Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device's exterior. For the lens, use a lens cleaning cloth and solution designed for optics. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in its protective pouch in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
  • Battery Care: If using AA batteries, remove them if the device will not be used for an extended period to prevent leakage. For rechargeable models, charge the battery periodically even if not in use to maintain battery health.
  • Software Updates: Check the manufacturer's website for any available firmware updates that may improve performance or add features.

12. Warranty and Support

Hti thermal imagers typically come with a 2-year warranty period. For technical support, warranty claims, or service, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

13. Certifications

The Hti Thermal Imaging Cameras are certified to meet various international standards, ensuring quality and safety:

  • CE Certification: Conforms to European Union health, safety, and environmental protection standards.
  • FCC Certification: Complies with Federal Communications Commission regulations for electromagnetic interference.
  • RoHS Certification: Adheres to the Restriction of Hazardous Substances Directive.
CE Certificate for HT-18 Thermal Imager

Figure 9: CE Certificate for HT-18.

FCC Certificate for HT-18 Thermal Imager

Figure 10: FCC Certificate for HT-18.

RoHS Certificate for HT-18 Thermal Imager

Figure 11: RoHS Certificate for HT-18.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.