1. Introduction
Thank you for choosing the Recordio GAP-628BT 5-Channel HiFi Amplifier. This powerful AV amplifier is designed to enhance your home audio experience, offering versatile connectivity for music playback, home theater, and karaoke. Featuring Bluetooth, USB/SD card playback, FM radio, and multiple audio inputs, the GAP-628BT delivers clear and dynamic sound. Please read this manual carefully before operating the device to ensure proper use and optimal performance.
2. Safety Information
- Ensure the amplifier is placed on a stable, flat surface with adequate ventilation.
- Do not expose the unit to rain, moisture, or extreme temperatures.
- Avoid placing objects on top of the amplifier that could block ventilation openings.
- Before connecting or disconnecting any cables, ensure the amplifier is powered off and unplugged from the mains.
- Use only the specified power voltage (AC 110V/220V or DC 12V) to prevent damage.
- Do not attempt to open or service the unit yourself. Refer all servicing to qualified personnel.
3. Package Contents
Verify that all items are present in your package:
- Recordio GAP-628BT Amplifier
- Remote Control
- Instruction Manual
- Power Cable

Text Description: The image displays the Recordio GAP-628BT amplifier, a remote control, a user manual, and a power cable, representing the standard package contents.
4. Product Overview
4.1 Front Panel Controls

Text Description: This image shows the front panel of the amplifier, detailing controls such as Power switch, USB and SD card slots, AUX input, Bluetooth indicator, Bass, Treble, Loudness, Balance, and Master Volume knobs. It also features dedicated controls for Microphone Volume, Microphone Bass, Microphone Treble, and Echo effect.
- Power Switch: Turns the amplifier on/off.
- LED Display: Shows current mode, track information, or FM frequency.
- USB/SD Card Slots: For playing audio files from USB drives or SD cards.
- AUX Input: 3.5mm jack for connecting external audio devices.
- Bluetooth Indicator: Lights up when Bluetooth is active.
- Mode Button: Switches between input sources (AUX, Bluetooth, USB/SD, FM).
- Playback Controls: Play/Pause, Previous/Next track buttons for USB/SD/Bluetooth.
- Bass/Treble: Adjusts low and high frequency response.
- Loud: Enhances bass and treble at low volumes.
- Balance: Adjusts the left/right channel output.
- Volume: Master volume control.
- MIC VOL: Adjusts microphone volume.
- MIC BASS/TREBLE: Adjusts bass and treble for microphone input.
- ECHO: Adjusts the echo effect for microphones.
4.2 Rear Panel Connections

Text Description: This image illustrates the rear panel of the amplifier, showing various connection points. These include RCA inputs for AUX1 and AUX2, RCA Line Input and Output, Speaker Output terminals (red and black binding posts), an FM antenna connector, a DC 12V input, and the AC power input.
- AUX1/AUX2 Audio Input (RCA): Connect external audio sources like CD players, DVD players, or other media devices.
- LINE Audio Input (RCA): Additional stereo audio input.
- LINE Audio Output (RCA): Connect to another amplifier or recording device.
- Speaker Output (Binding Posts): Connect passive speakers. Supports 4 to 16 ohm impedance.
- FM ANT: Connect the included FM antenna for radio reception.
- DC 12V Input: For alternative power supply (e.g., car battery, not included).
- AC Power Input: Connect the provided power cable to a wall outlet.
4.3 Remote Control

Text Description: The image shows the remote control unit for the amplifier, featuring buttons for power, mode selection, volume adjustment, track control, and other functions.
The remote control allows for convenient operation of the amplifier from a distance. Functions include power on/off, mode selection, volume adjustment, mute, and playback controls for USB/SD/Bluetooth.
5. Setup Instructions
5.1 Placement
- Place the amplifier on a flat, stable surface away from direct sunlight, heat sources, and moisture.
- Ensure there is sufficient space around the unit for proper ventilation to prevent overheating.
5.2 Connecting Speakers
- Ensure the amplifier is powered off and unplugged.
- Connect your passive speakers to the Speaker Output binding posts on the rear panel (Figure 4.2).
- Match the positive (+) terminal of the amplifier to the positive (+) terminal of the speaker, and the negative (-) terminal of the amplifier to the negative (-) terminal of the speaker.
- Ensure your speakers have an impedance between 4 and 16 ohms.

Text Description: The image shows a close-up of the red and black binding post terminals for speaker output on the rear panel of the amplifier, labeled for positive and negative connections.
5.3 Connecting Audio Sources
- RCA Inputs (AUX1, AUX2, LINE): Connect your external audio devices (e.g., CD player, TV, DVD player) using RCA cables to the corresponding input jacks on the rear panel (Figure 4.2).
- FM Antenna: Connect the provided FM antenna to the 'FM ANT' port on the rear panel for radio reception.
- USB Drive/SD Card: Insert a USB flash drive into the USB port or an SD card into the SD card slot on the front panel (Figure 4.1).

Text Description: This image provides a detailed view of the RCA audio input and output ports on the rear panel, labeled AUX1, AUX2, and LINE.
5.4 Connecting Microphones
- Connect up to two microphones to the MIC1 and MIC2 input jacks on the front panel (Figure 4.1).

Text Description: The image shows a close-up of the two microphone input jacks (MIC1, MIC2) and their corresponding volume, bass, treble, and echo controls on the front panel.
5.5 Power Connection
- Connect the provided power cable to the AC Power Input on the rear panel and then to a suitable wall outlet.
- Alternatively, for DC operation, connect a 12V DC power source (not included) to the DC 12V Input.
6. Operating Instructions
6.1 Power On/Off
- Press the Power switch on the front panel to turn the amplifier on or off. The LED display will illuminate.
6.2 Source Selection
- Press the 'Mode' button on the front panel or remote control to cycle through available input sources: AUX, Bluetooth, USB/SD, FM. The selected mode will be shown on the LED display.
6.3 Volume and Tone Controls
- Master Volume: Rotate the 'Volume' knob on the front panel to adjust the overall sound level.
- Bass/Treble: Use the 'Bass' and 'Treble' knobs to fine-tune the low and high frequencies of the audio.
- Loud: Activate the 'Loud' function for enhanced bass and treble at lower listening volumes.
- Balance: Adjust the 'Balance' knob to control the relative volume between the left and right channels.
6.4 Bluetooth Pairing
- Select 'Bluetooth' mode using the 'Mode' button. The LED display will show 'BT' and the Bluetooth indicator will flash.
- On your mobile device or computer, search for Bluetooth devices and select 'GAP-628BT'.
- Once paired, the Bluetooth indicator will stop flashing and remain solid. You can now play audio from your device.

Text Description: The image depicts the amplifier wirelessly connected via Bluetooth to a laptop, illustrating the ease of streaming audio.
6.5 USB/SD Card Playback
- Insert a USB drive or SD card with audio files into the respective slot.
- Select 'USB' or 'SD' mode. The amplifier will automatically begin playing audio files.
- Use the playback controls (Play/Pause, Previous/Next) on the front panel or remote to manage your music.

Text Description: This image shows a USB drive inserted into the amplifier's front panel, indicating its capability to play media directly from USB storage.
6.6 FM Radio
- Select 'FM' mode.
- The amplifier will automatically scan and store available radio stations.
- Use the Previous/Next buttons to navigate through stored stations.

Text Description: The image highlights the FM radio feature of the amplifier, showing the LED display tuned to a radio frequency.
6.7 Karaoke Function
- Connect microphones to the MIC1/MIC2 inputs.
- Adjust 'MIC VOL' to control microphone loudness.
- Use 'MIC BASS' and 'MIC TREBLE' to adjust the tone of your voice.
- Apply 'ECHO' effect for a professional karaoke sound.
7. Maintenance
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ventilation: Ensure the ventilation slots are clear of dust and debris to maintain proper airflow.
- Storage: If storing the amplifier for an extended period, unplug it and keep it in a cool, dry place.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power switch off; No power from outlet. | Check power cable connection; Turn on power switch; Test outlet with another device. |
| No sound output | Incorrect input source selected; Speaker cables loose/incorrectly connected; Volume too low; Mute activated. | Select correct input mode; Check speaker wiring (positive to positive, negative to negative); Increase volume; Deactivate mute. |
| Bluetooth not connecting | Amplifier not in Bluetooth mode; Device too far; Device already connected to another unit. | Ensure amplifier is in 'BT' mode; Move device closer; Disconnect from other devices and try again. |
| USB/SD playback not working | Incorrect mode selected; Incompatible file format; Corrupted USB/SD card. | Select 'USB' or 'SD' mode; Ensure audio files are in a supported format; Try a different USB drive/SD card. |
| Poor FM reception | Antenna not connected or poorly positioned. | Connect FM antenna securely; Adjust antenna position for better signal. |
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | GAP-628BT |
| Type | Professional AV Power Amplifier |
| Channels | 5 sound channel (5.1) |
| Output Power | 500W + 500W + 120W |
| Peak Power | 250W + 250W + 120W |
| Voltage | AC 110V/220V |
| Power Source | AC & DC |
| Distortion Rate | 0.01% |
| Impedance | 4 to 16 ohm |
| HiFi Support | Yes |
| Material | Aluminum Alloy |
| Dimensions (L x W x H) | 43cm x 25cm x 7cm |
| Weight | 5.5 kg |
| Built-in Battery | No |
| Inbox Adaptor | No (Power cable included) |
| Certification | CE |

Text Description: The image displays the amplifier with its physical dimensions clearly marked: 43cm in length, 25cm in width, and 7cm in height.
10. User Tips
- Passive Subwoofer Connectivity: The speaker output terminals are designed to connect passive speakers, including passive subwoofers, as long as their impedance falls within the 4 to 16 ohm range. Ensure correct polarity (+ to + and - to -) for optimal sound.
- Audio Source Check: If you experience no sound, always double-check that the correct input mode is selected on the amplifier and that your audio source device is playing and its volume is up.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the Recordio Official Store or your authorized dealer. Keep your purchase receipt as proof of purchase.
12. Product Overview Video
Text Description: This video provides a visual overview of the Recordio GAP-628BT amplifier, showcasing its front and rear panels, key features like Bluetooth and various inputs, and demonstrating its use in a home audio setup.