MESTEK EMF02R

Contents

MESTEK EMF02R EMF Meter User Manual

Professional High Frequency Electromagnetic Field Radiation Detector

Model: EMF02R | Brand: MESTEK

1. Introduction

The MESTEK EMF02R is a professional high-frequency electromagnetic field radiation detector designed for precise measurement across a wide frequency range of 30MHz to 8GHz. It features a highly sensitive triaxial sensing probe, a clear VA color screen display, and integrated sensors for temperature and humidity. This device is suitable for detecting electromagnetic radiation in various environments, including homes, offices, industrial settings, power distribution rooms, high-speed rail systems, and near signal base stations.

MESTEK EMF02R EMF Meter showing key features
Figure 1: MESTEK EMF02R EMF Meter highlighting its main features.

2. Product Overview

Familiarize yourself with the components and layout of your EMF02R detector.

Diagram of MESTEK EMF02R with labeled parts and dimensions
Figure 2: Front and side view of the EMF02R with labeled components and dimensions.

2.1 Components

  • Induction Probe: Triaxial (X, Y, Z-axis) sensor for electromagnetic field detection.
  • Display Screen: VA reverse color screen for digital and analog readings.
  • Function Keys: Buttons for power, mode selection, data hold, and other functions.
  • Charging Indicator Light: Indicates charging status.
  • Type-C Charging Port: For connecting the USB Type-C charging cable.
  • Temperature/Humidity Vents: 12 air vents on the back for precise environmental measurements.

2.2 Package Contents

Contents of the EMF02R product package
Figure 3: Items included in the product package.
  • 1 x MESTEK EMF02R High Frequency Radiation Detector
  • 1 x USB Type-C Charging Cable
  • 1 x Product Manual (this document)
  • 1 x Cloth Bag
  • 1 x Packaging Box

3. Setup

3.1 Charging the Device

The EMF02R is equipped with a built-in 18650/2000mAh/3.7V lithium battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB Type-C cable.

EMF02R connected to a charger via USB Type-C
Figure 4: Charging the EMF02R via USB Type-C.
  • Connect the USB Type-C cable to the charging port on the device and to a 5V/1A power adapter.
  • The charging indicator light will show red when charging and green when fully charged.
  • A full charge takes approximately 4 hours.

3.2 Charging Attention Notes

Important notes regarding charging the EMF02R
Figure 5: Important charging instructions.
  1. Please use an adapter that meets relevant safety certification requirements for charging in a well-ventilated and heat-dissipating environment. Pay attention to electrical safety regulations.
  2. When the instrument screen displays the low battery icon, it indicates that the battery is low. Please charge the instrument as soon as possible.
  3. During the charging process, the instrument will automatically shut down and cannot be started. It can be used normally after the charging is completed or stopped.

4. Operating Instructions

4.1 Key Functions

Understand the function of each button on your EMF02R detector.

Table of key functions on the EMF02R
Figure 6: Description of the function keys.
Symbol Description
Power button icon (Power button icon) Power button
SEL Function conversion key
AVG/MAX Average and maximum conversion keys
HOLD Data lock key
Ring tone icon (Ring tone icon) Ring tone on/off key
RF High frequency signal conversion key

4.2 Display Interpretation

The VA reverse color screen provides clear digital and analog dual display. Here's how to interpret the symbols and readings.

Table of screen display symbols and their meanings
Figure 7: Screen display symbols and their descriptions.
Symbol Describe Unit Meaning
Battery Indicator iconBattery IndicatoruTMicro Teslas
Automatic shutdown iconAutomatic shutdownmGMilliGauss
Simulated display iconSimulated displayV/mVolts per meter
AVGAverage valueuW/cm²Microwatt/square centimeter
MAXMaximum value℃Celsius
HOLDData locking℉Fahrenheit degree
RFRadio frequency%Percentage
H-fieldMagnetic fieldRingtone iconRingtones
E-fieldElectric field

4.3 Measurement Modes

The EMF02R can detect various forms of electromagnetic radiation. Use the SEL and RF buttons to switch between modes.

Description of RF, E-field, and H-field measurement modes
Figure 8: Overview of measurement modes.
  • RF (High Frequency): Short press the RF button. The screen displays "RF" indicating high-frequency signal radiation measurement mode. This mode can measure base stations between 30MHz and 8GHz high-frequency signal radiation.
  • E-field (Electric Field): Short press the SEL key to display "E-field" on the screen. This enters electric field radiation measurement mode.
  • H-field (Magnetic Field): Short press the SEL key to display "H-field" on the screen. This enters magnetic field radiation measurement mode. Press the SEL button again to convert the unit of measurement (mG MilliGauss to uT micro Tesla).

4.4 Radiation Level Interpretation

The device provides an analog display (bar graph) and numerical readings. The analog display uses a color-coded system to indicate radiation levels.

Radiation area comparison table with color codes and beep alarm levels
Figure 9: Radiation area comparison table.
Analog Display Green Yellow Red
uW/cm²0.0-39.940-99.9100-9999
V/m0-3940-99100-999
mG0.0-3.94.0-39.940.0-199.9
uT0.00-0.390.40-3.994.00-19.99
Beep alarmNothingCompactRapid

When the screen displays the electromagnetic radiation simulation bar reaching the yellow area, the instrument alarms, indicating excessive radiation. Protective measures should be taken or distance maintained from radiation sources.

4.5 Temperature and Humidity Measurement

The EMF02R also measures ambient temperature and humidity through its integrated sensors.

EMF02R displaying temperature and humidity readings
Figure 10: Temperature and humidity display.

The current temperature (in °C or °F) and relative humidity (RH%) are displayed on the screen. The device has 12 air vents on the back for accurate measurement of these environmental factors.

5. Maintenance

  • Keep the device clean and dry. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Store the device in the provided cloth bag when not in use to protect it from dust and scratches.
  • Do not attempt to open or repair the device yourself, as this will void the warranty and may cause damage.
  • Ensure the charging port is free from dust and debris to maintain proper charging functionality.

6. Troubleshooting

  • Device does not power on:
    • Ensure the battery is charged. Connect to a charger and wait for the charging indicator to turn green.
    • Press and hold the power button for a few seconds.
  • No readings or erratic readings:
    • Ensure the device is in the correct measurement mode (RF, E-field, or H-field) for the type of radiation you are trying to detect.
    • Move closer to the suspected radiation source.
    • Check for any physical obstructions around the induction probe.
  • Device shuts down unexpectedly:
    • The device has an automatic shutdown feature after approximately 15 minutes of inactivity to save battery.
    • If it shuts down during active use, the battery might be low. Recharge the device.
  • Inaccurate temperature/humidity readings:
    • Ensure the 12 air vents on the back are not obstructed.
    • Allow the device to acclimate to the environment for a few minutes before taking readings.

7. Specifications

Detailed technical parameters of the MESTEK EMF02R.

Table of technical specifications for the EMF02R
Figure 11: Technical parameters.
Parameter Value
Working height2000m
Measurement methodElectromagnetic induction, RF radio frequency receiving sensor
Display screenVA reverse display color screen
Maximum Display9999
Sampling rateAbout 0.4 seconds
Measuring rangeV/m: 0~999 / uT: 0.00~19.99 / mG: 0.0~199.9 / uW/cm²: 0.0~9999
Test bandwidth30MHz~8GHZ
Resolving powerV/m: 1 / uT: 0.01 / mG: 0.1 / uW/cm²: 0.1 / 0.1℃ / 0.2℉ / 1%RH
Alarm methodSound, simulation bar
Automatic shutdownAbout 15 minutes
Operating currentApproximately 50mA
Charging interfaceUSB Type-C
USB charging5V/1A
Power supplyBuilt-in 18650 / 2000mA / 3.7V lithium battery
Charging timeAbout 4 hours
Temperature measurement range0~50℃
Humidity measurement range0~90%RH
Working temperature and humidity0~50℃ / ≤90%RH
Storage temperature and humidity-10~60℃ / 0~80%RH
Size204 x 63 x 32mm
WeightApproximately 220g

8. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or manufacturer's customer service department.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.