HOMCOM electric fireplace 1000W/2000W with adjustable LED flame 40,5x20x62cm

Contents

HOMCOM Electric Fireplace User Manual

Model: Electric Fireplace 1000W/2000W with Adjustable LED Flame 40.5x20x62cm

Brand: HOMCOM

1. Introduction

Thank you for choosing the HOMCOM Electric Fireplace. This desktop electric fireplace is designed to provide warmth and a cozy ambiance with its realistic flame effect. It features two adjustable heat settings (1000 W/2000 W) and incorporates safety features for your peace of mind. Its compact and portable design makes it suitable for various spaces in your home or office.

Front view of the HOMCOM electric fireplace
Figure 1: Front view of the HOMCOM electric fireplace, showcasing its modern design and realistic flame effect.

2. Important Safety Information

Please read all instructions carefully before using this electric fireplace and retain for future reference.

  • Always plug the fireplace directly into a wall outlet. Never use with an extension cord or relocatable power tap.
  • Do not place the fireplace near curtains, furniture, or other combustible materials. Maintain a minimum distance of 1 meter (3 feet) from any surface.
  • Do not cover the fireplace or block the air vents. This can lead to overheating.
  • Ensure the voltage and frequency of your power supply match the specifications of the appliance.
  • This appliance is equipped with an overheating protection device that automatically shuts off the unit if it gets too hot. If this occurs, unplug the unit, let it cool down, and check for any obstructions before restarting.
  • The tempered glass panels remain cool to the touch, preventing burns, but caution should always be exercised around heating elements.
  • Keep children and pets away from the appliance when it is in operation.
Safety features of the electric fireplace
Figure 2: Safety features of the electric fireplace, highlighting overheating protection and tempered glass for user safety.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact customer support immediately.

  • HOMCOM Electric Fireplace Unit
  • User Manual
  • Assembly Hardware (if applicable, for legs/base)

4. Specifications

FeatureDetail
ColorBlack
MaterialSteel, Tempered Glass, ABS
Total Measurements (L x W x H)40.5 cm x 20 cm x 62 cm
Glass Panel Measurements (Front)39.5 cm x 36 cm
Glass Panel Measurements (Side)12 cm x 36 cm
Power1000 W / 2000 W (Adjustable)
Coverage Area15-20 m²
Input Voltage220-240V / 50Hz
Cable Length1.5 m
Noise LevelLess than 55 dB
Overheating ProtectionYes
CertificationsCE (EMC, LVD, ROHS, ERP)
Reference Model820-301V90BK
Dimensions of the electric fireplace
Figure 3: Dimensional diagram of the electric fireplace, showing height (62 cm), depth (20 cm), and width (40.5 cm).
Technical specifications of the electric fireplace
Figure 4: Detailed technical specifications including coverage area (15-20 m²), voltage/frequency (220-240V / 50Hz), power (1000 W / 2000 W), and noise level (55 dB).

5. Setup and Installation

This electric fireplace requires some basic assembly, primarily for attaching the legs or base. Please follow the detailed assembly instructions provided in the separate assembly guide included in your package.

  1. Carefully unpack all components and ensure all parts listed in the package contents are present and undamaged.
  2. Place the main fireplace unit on a soft, clean surface to prevent scratching during assembly.
  3. Attach the legs/base to the main unit using the provided hardware. Ensure all screws are tightened securely.
  4. Position the fireplace on a flat, stable, and non-combustible surface. Ensure there is adequate clearance from walls and other objects as specified in the safety information.
  5. Plug the power cord into a grounded wall outlet.
Electric fireplace placed in a room setting
Figure 5: The electric fireplace positioned in a room, demonstrating its compact size and aesthetic integration.

6. Operating Instructions

The HOMCOM electric fireplace offers both heating and a realistic flame effect, which can be operated independently.

6.1 Power On/Off

  • Plug the fireplace into a suitable electrical outlet.
  • Locate the main power switch (usually on the back or side of the unit) and turn it to the 'ON' position.

6.2 Heat Settings

  • The fireplace has two heat settings: 1000 W and 2000 W.
  • Use the control knob or buttons (refer to your specific model's controls) to select the desired heat output.
  • An adjustable thermostat allows you to set your preferred room temperature. The heater will cycle on and off to maintain this temperature.

6.3 Flame Effect

  • The realistic LED flame effect can be used independently of the heating function, allowing you to enjoy the ambiance without heat.
  • The flame brightness is adjustable in 4 positions. Use the dedicated control (knob or button) to cycle through the brightness levels.
Realistic flame effect and adjustable brightness
Figure 6: Illustration of the realistic flame effect, which can be used independently of the heater, and the 4-position adjustable brightness feature.
Three-sided transparent design
Figure 7: The fireplace features a three-sided transparent design, providing a 180-degree view of the flame effect.

7. Maintenance and Care

Regular cleaning and maintenance will ensure the longevity and optimal performance of your electric fireplace.

  • Before Cleaning: Always unplug the appliance from the power outlet and allow it to cool completely before cleaning.
  • Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
  • Glass Panels: Clean the glass panels with a soft cloth and a glass cleaner. Avoid spraying cleaner directly onto the unit; instead, apply it to the cloth first.
  • Air Vents: Periodically vacuum or wipe the air intake and exhaust vents to prevent dust buildup, which can impede airflow and affect performance.
  • Storage: If storing the fireplace for an extended period, unplug it and store it in a cool, dry place, preferably in its original packaging.

8. Troubleshooting

If you encounter any issues with your electric fireplace, please refer to the following common problems and solutions:

  • No Power:
    - Check if the power cord is securely plugged into a working outlet.
    - Ensure the main power switch on the unit is in the 'ON' position.
    - Check your household circuit breaker or fuse box.
  • Heater Not Working (Flame Effect Works):
    - Ensure the heat setting is selected and the thermostat is set above the current room temperature.
    - The overheating protection may have activated. Unplug the unit, let it cool for 15-20 minutes, and check for any obstructions around the vents before plugging it back in.
  • Flame Effect Not Working:
    - Check if the flame effect function is turned on.
  • Unusual Noises:
    - A slight fan noise is normal during heating operation (less than 55 dB). If you hear loud or unusual noises, unplug the unit and contact customer support.

If the problem persists after trying these steps, please contact customer support.

9. User Tips

  • For optimal heating, ensure the fireplace is placed in the center of the room or an area where heat can circulate freely.
  • Utilize the independent flame effect feature to create a cozy atmosphere even when heating is not required, saving energy.
  • Adjust the flame brightness to suit your mood or ambient lighting conditions.
  • Regularly check and clean the air vents to maintain efficient heating and prevent dust accumulation.

10. Warranty and Customer Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you have any questions, require technical assistance, or need to report a problem with your HOMCOM electric fireplace, please contact customer support through the seller's contact channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.