haozee Human presence sensor

Contents

Haozee Tuya WiFi/ZigBee 24G MmWave Radar Smart Human Presence Sensor Instruction Manual

Model: Human Presence Sensor | Brand: Haozee

1. Introduction

The Haozee 24G MmWave Radar Smart Human Presence Sensor is an advanced device designed to detect human presence, including both motion and subtle stillness (e.g., sleeping), and ambient illumination. It offers intelligent control over lighting and other smart home devices, enhancing comfort and energy efficiency. This manual provides detailed instructions for the setup, operation, and maintenance of your sensor.

The sensor is available in two versions: a WiFi version for direct connection to your 2.4GHz WiFi network, and a ZigBee version that requires a compatible ZigBee hub (such as Tuya ZigBee hub or Home Assistant with zigbee2mqtt).

Haozee Human Presence Sensor with basic wiring diagram
Figure 1: Haozee Human Presence Sensor (Wall Mount) with optional light bulb wiring.

2. Setup

2.1 Unboxing

Upon opening the package, you should find the human presence sensor unit and a user guide. Please review the user guide for any additional specific instructions.

Video 1: Product unboxing and connection tutorial.

2.2 Electrical Connection

The sensor requires an AC 95-250V power supply. It can also directly control a light switch with an output of AC 95-250V, 2A. Ensure all connections are secure and correct before applying power.

  • Connect the Live (L) and Neutral (N) wires from your power supply to the corresponding terminals on the sensor.
  • If connecting to a light, connect the Live Out (L1) and Neutral Out (N1) terminals from the sensor to your light fixture.
Wiring diagram for connecting the sensor to a light switch
Figure 2: Wiring diagram for connecting the sensor to various traditional lights.

2.3 Mounting Options

The sensor supports both ceiling and wall mounting. Choose the appropriate mounting method for your installation.

  • Wall Mounting: The square model is designed for wall installation.
  • Ceiling Mounting: Round models are available for ceiling installation, with options for direct mounting or mounting with clips.
Diagram showing ceiling mounting options for the sensor
Figure 3: Ceiling mounting options, including direct and clip-based installation.
Product size specifications for different mounting types
Figure 4: Product dimensions for wall mounting, mounting with clip, and ceiling mounting.

2.4 App Pairing

To integrate your sensor with your smart home system, you need to pair it with the Tuya Smart or Smart Life app.

  1. Ensure the sensor is powered on.
  2. Long press the pairing button on the sensor until the indicator light flashes, indicating it's in pairing mode.
  3. Open the Tuya Smart or Smart Life app on your smartphone.
  4. Follow the in-app instructions to add a new device.

2.4.1 WiFi Version

The WiFi version connects directly to your 2.4GHz WiFi network. Ensure your phone is connected to the same 2.4GHz network during pairing.

Diagram showing WiFi pairing process with a router and app
Figure 5: WiFi pairing process and app remote control.

2.4.2 ZigBee Version

The ZigBee version requires a ZigBee gateway (hub) to function. Ensure your ZigBee hub is already set up and connected to your app.

Diagram showing ZigBee pairing process with a gateway and app
Figure 6: ZigBee pairing process and app remote control.

3. Operating Instructions

3.1 Presence Detection

The 24G MmWave Radar technology allows for accurate detection of human presence, including subtle movements and even stillness (e.g., when someone is sleeping or reading quietly). The detection range is up to 6 meters with a 120-degree detection angle.

Diagram illustrating the 6m detection distance and 120-degree detection angle
Figure 7: Millimeter Wave Radar accurate detection range and angle.
Examples of presence and none status detection scenarios
Figure 8: Presence/None Status Detection in various states.

3.2 Illumination Detection (Lux Sensor)

The integrated lux sensor allows the device to detect ambient light levels. This feature can be used to create smart scenes, for example, turning on lights only when it's dark and someone is present.

App interface for setting illumination value
Figure 9: Setting illumination value in the app (e.g., 10Lux, 20Lux, 50Lux, 24H).

3.3 Smart Light Switch Control

The sensor can be wired directly to control lights. Through the app, you can configure automated actions based on presence and illumination.

  • Automatic Control: Set rules to turn lights on when presence is detected and off when no one is present.
  • Customizable Delay: Adjust the delay time (e.g., 3s, 5s, 10s, up to 1800s) for lights to turn off after presence is no longer detected.
  • Manual Override: The wall mount version includes a physical button for manual light control.
App interface for setting presence delay time
Figure 10: Setting custom presence time (delay) in the app.
Bathroom scenario demonstrating automatic light control based on presence
Figure 11: Example of automatic light control in a bathroom.

3.4 App Remote Control & Smart Scenes

The Tuya Smart or Smart Life app provides real-time monitoring of presence status and allows for advanced customization:

  • Real-time Status: View current distance, presence time, and detection distance settings.
  • Push Notifications: Receive alerts on your phone when motion or presence is detected.
  • Scene Creation: Link the sensor with other smart products to create complex automation scenarios (e.g., turn on AC when presence is detected, adjust lighting based on illumination and presence).
  • Device Sharing: Share control of the sensor with family members through the app.
App interface showing real-time presence detection and settings
Figure 12: App remote control interface for presence sensor.
Diagram showing how to share the device with family members
Figure 13: Sharing the device with family for collaborative smart home management.

4. Maintenance

To ensure optimal performance and longevity of your Haozee Human Presence Sensor, follow these general maintenance guidelines:

  • Cleaning: Gently wipe the sensor's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the device.
  • Environment: Install the sensor in a location free from excessive dust, moisture, or extreme temperatures, as specified in the operating conditions.
  • Firmware Updates: Periodically check the Tuya Smart or Smart Life app for available firmware updates to ensure your device has the latest features and security enhancements.

5. Troubleshooting

  • Device not pairing:
    • Ensure the sensor is powered correctly (AC 95-250V).
    • For WiFi version, confirm your router is broadcasting a 2.4GHz network and your phone is connected to it during pairing.
    • For ZigBee version, verify your ZigBee hub is online and properly configured in the app.
    • Long press the pairing button on the sensor until the indicator light flashes to enter pairing mode.
  • Light not turning on/off:
    • Check all electrical connections (L, N, L1, N1) are secure and correct.
    • Verify the light bulb is functional.
    • Review the app settings for detection distance, sensitivity, illumination value, and output time to ensure they match your desired behavior.
    • Ensure the 'Output mode' in the app is set to 'Auto' for automatic control.
  • Inaccurate presence detection:
    • Adjust the 'Motion Detection Sensitivity' and 'Motionless Detection Sensitivity' settings in the app. Higher sensitivity detects more subtle movements.
    • Ensure the sensor's line of sight is not obstructed.
    • Consider the mounting height and angle to optimize coverage within the 6m range and 120-degree angle.
  • Wall mount version button not working:
    • The wall mount version does have a physical button for manual light control. Ensure the sensor is powered and correctly wired. If the button is unresponsive, check power supply and app settings for any overrides.

6. Specifications

Feature Specification
Power Supply AC 95~250V, 50/60Hz
Max Output Current 2A
Detection Range 6m
Detection Angle 120°
Wireless Distance 45M
Wireless Protocol (WiFi) IEEE 802.11b/g/n (2.4GHz)
Wireless Protocol (ZigBee) IEEE 802.15.4 (2.4GHz)
Bluetooth Version Bluetooth 5.0
Radar Frequency 24GHz~24.25GHz
Working Temperature -10℃ ~ 60℃ (14°F~140°F)
Storage Humidity 1% ~ 85% RH (non condensing)
Product Size (Wall Mounting) 86 x 86 x 28.5mm
Product Size (Mounting with Clip) Ø 60*28.5mm
Product Size (Ceiling Mounting) Ø 90*28.5mm
Certification CE, RoHS
Smart Home Platform Tuya
Lux Sensor Supported
Distance Meter Supported

7. Warranty and Support

This product is certified with CE and RoHS standards, ensuring compliance with health, safety, and environmental protection directives.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty claims.

8. User Tips

  • Wiring Safety: Always double-check all electrical connections before plugging in the power supply to prevent damage to the device or electrical hazards.
  • ZigBee Hub Compatibility: If you have the ZigBee version, ensure your hub is compatible with Tuya devices or supports zigbee2mqtt for Home Assistant integration.
  • WiFi Network: For WiFi versions, remember that the sensor only supports 2.4GHz WiFi networks. Ensure your router is configured accordingly.
  • Wall Mount Button: The wall mount version features a physical button that can be used for manual light control, offering a convenient override to automated settings.
  • Sensitivity Adjustment: Experiment with the motion and motionless detection sensitivity settings in the app to find the optimal balance for your environment and avoid false triggers or missed detections.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.