JJRC SG316 Series 1:16 Scale 4WD High-Speed Remote Control Car Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your JJRC SG316 Series 1:16 Scale 4WD High-Speed Remote Control Car. The series includes the SG316 MAX (Brushless Motor) and SG316 PRO (Carbon Brush Motor) models, both designed for high-performance off-road driving.

Please read this manual thoroughly before operating your RC car to ensure safe and optimal performance. Keep this manual for future reference.

Figure 1: SG316 Series RC Car, Remote Control, and Packaging

Safety Information

• Warning: Not suitable for children under 36 months due to small parts.
• Recommended age for operation is 14 years and older.
• Always operate the RC car in open areas, away from people, pets, and obstacles.
• Do not operate near water or in wet conditions unless explicitly stated as waterproof.
• Ensure batteries are charged correctly and handled with care. Do not short-circuit or puncture batteries.
• Always turn off the car and remote control when not in use.

Package Contents

Upon unpacking, please verify that all items listed below are present:

• RC Car (SG316 MAX or SG316 PRO) x 1
• Remote Control x 1
• Lithium Battery (7.4V 1500mAh for MAX, 7.4V 1300mAh for PRO) x 1
• USB Balanced Charging Cable x 1
• Tail Wing x 1
• Shock Absorber Adjustment Buckle x 1
• Metal Bolt x 1
• Cross Screwdriver x 1
• Hexagonal Socket x 1
• Instruction Manual (Chinese and English) x 1

Figure 2: Typical Package Contents (SG316 PRO shown)

Specifications

The SG316 series offers two main models with distinct performance characteristics:

Figure 3: SG316 MAX vs SG316 PRO Specification Comparison

Key Features:

• 4WD System: Powerful four-wheel drive for various terrains.
• Suspension: Front and rear upright spring shock absorption with dual wishbone independent suspension system.
• Control: 2.4G full proportional synchronous remote control system with full proportional throttle and steering.
• Lighting: Equipped with LED headlights offering three modes: constant light, slow flashing, and fast flashing.
• Durability: Features 16 ball bearings throughout the vehicle for smooth operation and reduced friction.
• Tires: Simulated tires with strong grip suitable for flat, sandy, muddy, and grassland environments.
• Aerodynamic Design: Large aerodynamic tail for increased downforce and stable handling.
• Head-Up Wheel: Professional head-up wheel to prevent overturning and adjust body stability during aggressive driving.

Figure 4: Key Performance Features

Setup Guide

1. Charging the Car Battery

1. Connect the included USB balanced charging cable to the lithium battery.
2. Plug the USB end of the charging cable into a suitable USB power adapter (e.g., computer USB port, wall charger).
3. The indicator light on the charger will show the charging status (refer to charger's specific instructions for light indications).
4. Charge the battery for approximately 3-4.5 hours (refer to specifications for your model's exact charging time). Do not overcharge.
5. Once fully charged, disconnect the battery from the charger.

2. Installing Car Battery

1. Locate the battery compartment on the RC car.
2. Carefully insert the charged lithium battery into the compartment.
3. Connect the battery connector to the car's power port. Ensure a secure connection.
4. Close the battery compartment cover.

3. Installing Remote Control Batteries

1. Open the battery cover on the back of the remote control.
2. Insert 3 AA batteries (not included) into the compartment, observing the correct polarity (+/-).
3. Close the battery cover securely.

4. Pairing the Remote Control with the Car

1. Ensure both the RC car and the remote control are turned off.
2. First, turn on the RC car. The car's indicator light may flash.
3. Next, turn on the remote control.
4. The remote control and car should automatically pair. The car's indicator light will become solid once paired.
5. If pairing fails, turn off both devices and repeat the process.

5. Attaching the Tail Wing

Attach the tail wing to the designated slot at the rear of the RC car using the provided metal bolt and screwdriver. Ensure it is firmly secured.

Operating Instructions

Remote Control Overview

Figure 5: Remote Control Layout

• Steering Wheel: Rotate left or right to steer the car.
• Accelerator Trigger: Pull to move forward, push to brake/reverse.
• LED Light Button: Controls the car's LED headlights (Constant light, Slow flashing, Fast flashing).
• Three-Speed Control: Adjusts the car's speed mode (Fast/Medium/Slow).

Figure 6: Remote Control Fine Adjustments

• Steering Trim (1): Adjusts the neutral position of the steering. If the car pulls to one side, use this to correct it.
• Rudder Range Regulate (2): Adjusts the maximum steering angle.
• Steering Change (3): Reverses the steering direction.
• Power Switch (4): Turns the remote control ON/OFF.

Driving Your RC Car

1. After pairing, gently pull the accelerator trigger to move forward. Push the trigger to brake or reverse.
2. Use the steering wheel to control direction.
3. Experiment with the three-speed control to match your skill level and terrain.
4. The car is designed for various terrains including flat, sandy, muddy, and grassland.
5. Utilize the LED headlights for visibility in low-light conditions.

Maintenance

General Cleaning

• After each use, especially in dirty or dusty conditions, clean the car with a soft brush or cloth.
• Remove any debris from the wheels, suspension, and chassis to prevent damage.
• Do not use water directly on electronic components unless the model is specifically rated as fully waterproof.

Battery Care

• Always disconnect the battery from the car when not in use.
• Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• Do not store fully charged or fully discharged batteries for extended periods. Aim for a storage charge of around 50%.
• If the battery swells, discontinue use immediately and dispose of it properly.

Inspecting Components

• Regularly check all screws and fasteners to ensure they are tight.
• Inspect the tires for wear and tear.
• Check the suspension components for any damage or bending.
• Ensure the metal differentials and drive shafts are free from obstructions and operate smoothly.

Wave Box Cover Access (SG316 MAX)

The SG316 MAX features an upgraded 2.0 wave box cover designed for convenient disassembly and replacement of the motor. This allows for checking the gearbox status without complete vehicle removal.

Figure 7: Anti-Loss Rubber Buckle and Wave Box Cover

Troubleshooting

User Tips

• For optimal performance, ensure the car's battery is fully charged before each use.
• Practice in an open area to get accustomed to the car's handling and speed before attempting more challenging maneuvers.
• Regularly check the shock absorbers and adjust them using the provided buckle for different terrains or driving styles.
• The professional head-up wheel is designed to prevent overturning; utilize it when performing stunts or driving on uneven surfaces.
• Consider purchasing additional batteries for extended play sessions.

Figure 8: Professional Head-Up Wheel

Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.