Mibro Earbuds 2

Contents

Mibro Earbuds 2 Wireless Earphone User Manual

Model: Earbuds 2 | Brand: Mibro

1. Introduction

Welcome to the Mibro Earbuds 2 user manual. This guide provides detailed instructions on how to set up, operate, and maintain your new wireless earphones. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Package Contents

Ensure all items are present in the package:

  • 1 x Mibro Earbuds 2 (True Wireless Stereo Earbuds)
  • 1 x Charging Case
  • 1 x User Manual
  • 1 x Charging Cable

4. Specifications

FeatureSpecification
Brand NameMibro
ModelEarbuds 2
CategoryEarphones & Headphones
MaterialPlastic
Weight (Package)99.5g / 3.5oz
Weight (Single Earbud)3.4g
Bluetooth Version5.3
Operation Distance≤10m / 33ft
Earbud Battery Capacity40mAh (Li-Ion Polymer)
Charging Case Battery Capacity380mAh
Total PlaytimeUp to 25 hours (with charging case)
Call Time6.5 hours
Charging TimeApprox. 1.5 hours
Input Parameters5V 40mA
Vocalism PrincipleDynamic
Dynamic Woofer Size13mm
CodecsAAC, SBC
Sound IsolatingYes
Active Noise-CancellationYes (AI Call Noise Cancellation)
Control ButtonYes (Touch Control)
Volume ControlYes
Waterproof RatingIPX5 (Resists sweat and light splashes)
Support APPYes
CertificationCE
OriginMainland China

5. Setup

5.1. Initial Charging

Before first use, fully charge the earbuds and the charging case.

  1. Place the earbuds into the charging case.
  2. Connect the charging cable to the USB-C port on the charging case and a power source.
  3. The indicator light on the charging case will show charging status. Once fully charged, the light may change or turn off.
Diagram showing the charging case with earbuds inside, indicating 25 hours of battery life and various protection features like overshoot, over-power, short-circuit, and voltage stabilization.
Figure 1: Charging and Battery Life Overview. The charging case provides extended playtime and includes multiple protection features.

5.2. Pairing with Your Device (One-Step Auto Pairing)

The Mibro Earbuds 2 feature one-step auto pairing for convenience.

  1. Open the charging case. The earbuds will automatically enter pairing mode.
  2. On your device (smartphone, tablet, etc.), go to Bluetooth settings.
  3. Search for available devices and select "Mibro Earbuds 2" from the list.
  4. Once selected, the earbuds will connect instantly.
Image showing an earbud being taken out of its charging case, with a smartphone screen in the background displaying Bluetooth settings and 'Mibro Earbuds 2' as a connectable device.
Figure 2: One-Step Auto Pairing. Earbuds automatically pair with your device upon removal from the case.

5.3. Wearing the Earbuds

Insert the earbuds gently into your ears. Adjust them for a comfortable and secure fit to ensure optimal sound quality and noise cancellation.

A woman wearing the Mibro Earbuds 2 during exercise, demonstrating a comfortable and secure fit.
Figure 3: Comfortable Wear. The lightweight design ensures comfort during extended use, even during exercise.

6. Operating Instructions

6.1. Touch Control Functions

The Mibro Earbuds 2 feature intelligent touch controls for easy management of music and calls.

Diagram illustrating touch control gestures on the earbud for various functions: Play/Pause (tap twice), Voice assistant (tap and hold for 2 seconds), Previous Song (quick triple-tap left earbud), Next Song (quick triple-tap right earbud), Reduce volume (single tap left earbud), Increase volume (single tap right earbud), Answer/End call (tap twice), Reject Call (tap and hold for 2 seconds).
Figure 4: Touch Control Guide. Control music and phone calls with simple taps and holds.
FunctionGesture
Play/PauseTap twice (left/right earbud)
Voice AssistantTap and hold for two seconds (left/right earbud)
Previous SongQuick triple-tap (left earbud)
Next SongQuick triple-tap (right earbud)
Reduce VolumeSingle tap (left earbud)
Increase VolumeSingle tap (right earbud)
Answer/End CallTap twice (left/right earbud)
Reject CallTap and hold for two seconds (left/right earbud)

6.2. AI Call Noise Cancellation

The earbuds are equipped with an AI algorithm combined with a deep neural network algorithm to suppress up to 75% of background noise and isolate your voice during calls, ensuring clear communication.

Diagram showing sound waves being processed by an earbud, illustrating how AI call noise cancellation suppresses background noise and enhances voice clarity.
Figure 5: AI Call Noise Cancellation. Advanced algorithms ensure clear voice transmission by reducing ambient noise.

6.3. Bluetooth 5.3 Connectivity

The integrated BT 5.3 chip provides faster transmission speeds and enhanced connection stability, contributing to a seamless audio experience.

Diagram highlighting the Bluetooth 5.3 chip and its benefits, including improved connection range, stability, transmission speed, and power saving.
Figure 6: Stable Bluetooth 5.3 Chip. Enjoy faster transmission and better stability for an uninterrupted connection.

6.4. Audio Quality

The 13mm dynamic woofer enhances audio resolution, optimizing vocal and high-frequency performance while providing strong low-frequency response. This results in a layered, full sound effect with rich and real sound details.

Detailed diagram of an earbud's internal speaker components, emphasizing the 13mm dynamic woofer for pleasant stereo sound.
Figure 7: Pleasant Stereo Sound. The 13mm dynamic woofer delivers rich and detailed audio.

6.5. Product Showcase Video

Video 1: Mibro Earbuds 2 Product Showcase. This video demonstrates the key features and design of the earbuds, including auto-pairing, touch controls, AI noise cancellation, and charging.

7. Maintenance

7.1. Cleaning

  • Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents.
  • Avoid getting moisture in any openings.

7.2. Storage

  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Store in a cool, dry place, away from extreme temperatures and direct sunlight.

7.3. Water Resistance

The Mibro Earbuds 2 are rated IPX5 waterproof, meaning they can effectively resist water from sweat, face water, and other daily use scenarios. However, they are not designed for submersion in water or use during swimming.

Image of black earbuds with water droplets on them, indicating IPX5 waterproof rating.
Figure 8: IPX5 Waterproof. Resistant to sweat and splashes for enjoyable exercise.

8. Troubleshooting

If you encounter any issues with your Mibro Earbuds 2, please refer to the following common solutions:

  • Earbuds not pairing: Ensure both earbuds are in the charging case, then open the lid to initiate pairing. Check your device's Bluetooth settings to ensure Bluetooth is enabled and select "Mibro Earbuds 2".
  • Only one earbud working: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid again. This often resets the connection between the earbuds.
  • No sound: Check the volume level on your connected device and on the earbuds (via touch control). Ensure the earbuds are properly paired and connected.
  • Charging issues: Ensure the charging cable is securely connected to both the case and the power source. Check for any debris in the charging port.
  • Touch controls unresponsive: Ensure your fingers are clean and dry. Try resetting the earbuds by placing them in the case and closing the lid for a few seconds.

For further assistance, please contact customer service.

9. User Tips

  • For the best audio experience, ensure the earbuds fit snugly in your ears. Experiment with different ear tip sizes if available (though not explicitly mentioned in package contents, it's a common earbud feature).
  • Regularly clean the earbuds, especially the speaker mesh, to prevent sound degradation.
  • Keep the charging case charged to ensure your earbuds are always ready for use.
  • When not actively listening, placing the earbuds back in the case helps conserve battery life and protects them from damage.

10. Warranty & Support

10.1. Manufacturer Information

Manufacturer: Feiruilande Shenzhen Shangmao Co., Ltd.
Address: CN-3B01-50, Building A1, 1983 Creative Town, No. 29, Nanxin Street, Nanling Village, Nanwan Street, Longgang District, Shenzhen
Tel: 86-13927483703

10.2. EU Authorized Representative

Representative: SOLID AUTHORITY LIMITED
Address: 51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Ireland

10.3. Compliance Information

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

10.4. Customer Service

If you have any questions or require support, please contact the store customer service staff where you purchased the product.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.