1. Product Overview
The JONSBO T6 is a compact ITX chassis designed for portability and aesthetic appeal. With a volume of approximately 13.7 liters, it features an outer shell crafted from 3mm aluminum alloy and adorned with North American black walnut wood panels. This design makes it an ideal choice for a stylish, home-level desktop mini console. A high-strength wooden handle offers flexible positioning, serving both as a carrying handle and a convenient headphone stand. The chassis is engineered with front and rear dual fans directly connected to the cooling air duct, addressing thermal management challenges in small form factor builds.


2. Specifications
The JONSBO T6 PC Case offers robust compatibility within its compact design. Below are the detailed specifications:
| Feature | Specification |
|---|---|
| Model Number | T6 |
| Chassis Type | Desktops (Mini Tower) |
| Form Factor | ITX |
| Case Size (W x D x H) | 185mm x 223mm x 332mm (including foot pad) |
| Case Volume | Approximately 13.7L |
| Case Weight | 3.5kg |
| Material | 3mm Aluminum alloy, 1mm Steel, Tempered glass, 8mm North American black walnut wood |
| Compatible Motherboard | ITX / MINI-DTX |
| Max GPU Length | 215mm |
| Max CPU Cooler Height | 160mm |
| Max PSU Length | 140mm (ATX Power Model) |
| Expansion Slots | 2 |
| Hard Disk Slots | 2.5" SSD x2 |
| Front Ports | Type-C*1, USB3.0*1, AUDIO*1 + MIC*1 (2-in-1) |
| RGB Support | NO RGB |
| Side Panel Window | Yes |
| Fan Support (Optional) | Front panel: 120mm*1 or 140mm*1; Rear panel: 120mm*1 |


3. Setup and Installation
This section guides you through the assembly of your JONSBO T6 PC Case. It is recommended to watch the provided video for a visual demonstration of the installation process.
3.1 Disassembly
- Carefully remove the magnetic suction glass side panel by gently pulling it open.
- Unscrew and remove the top panel, front panel, and rear panel as needed to access the internal components.

3.2 Motherboard Installation
The T6 case supports ITX and MINI-DTX motherboards.
- Install the I/O shield into the motherboard tray opening.
- Align your motherboard with the standoffs and secure it with screws.

3.3 Power Supply Unit (PSU) Installation
The case supports ATX power supplies up to 140mm in length.
- Mount your ATX PSU into its designated compartment.
- Secure the PSU with screws.
- Route necessary power cables through the case.
3.4 Storage Device Installation
The T6 provides two dedicated slots for 2.5" SSDs.
- Locate the 2.5" SSD mounting points.
- Secure your SSDs using the provided screws.

3.5 Graphics Card (GPU) Installation
The case supports graphics cards up to 215mm in length.
- Insert your GPU into the PCIe slot on the motherboard.
- Secure the GPU with the retention mechanism or screws.
3.6 Fan Installation
The case supports optional fans for enhanced cooling:
- Front panel: One 120mm or 140mm fan.
- Rear panel: One 120mm fan.
- Mount the fans to their respective positions.
- Connect the fan power cables to your motherboard or PSU.

3.7 Reassembly
Once all components are installed, reattach the panels in reverse order of disassembly. Ensure all screws are tightened and the magnetic side panel is securely closed.
4. Operation
4.1 Power On/Off
Press the power button located on the front panel to turn on your PC. To turn off, use the operating system's shutdown function or press and hold the power button for several seconds for a forced shutdown.
4.2 Front Panel Ports
The front panel provides convenient access to various ports:
- Type-C (10Gbps): For high-speed data transfer with compatible devices.
- USB 3.0 (5Gbps): For connecting USB 3.0 devices.
- Audio (2-in-1): A combined port for headphones and microphone.

4.3 Multifunctional Handle
The integrated wooden handle can be adjusted and used in multiple ways:
- Carrying Handle: For easy transportation of your PC.
- Headphone Stand: Position the handle to serve as a convenient holder for your headphones.

5. Maintenance
5.1 Dust Filter Cleaning
The JONSBO T6 case is equipped with dust filters at the main air inlets/outlets to prevent dust accumulation inside the chassis. Regularly clean these filters to maintain optimal airflow and cooling performance.
- Locate the dust filters (typically on the top, bottom, and front mesh panels).
- Gently remove the filters.
- Clean them using compressed air, a soft brush, or by rinsing with water (ensure they are completely dry before reinstallation).
- Reattach the cleaned dust filters.

5.2 Exterior Cleaning
To clean the exterior of the case, use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the aluminum finish or wooden panels.
6. Troubleshooting
This section addresses common issues you might encounter with your PC case.
6.1 No Power
- Ensure all power cables from the PSU are correctly connected to the motherboard and components.
- Verify that the power button cable from the front panel is correctly connected to the motherboard's front panel header.
- Check the power outlet and PSU switch.
6.2 Overheating Issues
- Ensure all installed fans are spinning correctly and are not obstructed.
- Clean dust filters and internal components regularly to prevent dust buildup, which can restrict airflow.
- Verify that the CPU cooler and GPU cooler are properly seated and functioning.
6.3 Loose Panels or Components
- Check that all screws securing internal components and external panels are tightened.
- Ensure the magnetic side panel is fully closed and seated correctly.
6.4 Front Panel Ports Not Working
- Verify that the front panel I/O cables (USB, Audio, Type-C) are securely connected to the corresponding headers on your motherboard.
- Check your motherboard's manual for correct header pinouts.
7. User Tips
- Cable Management: Utilize the available space and tie-down points within the chassis to manage cables effectively. Good cable management improves airflow and aesthetics.
- Optimal Airflow: Consider installing optional fans (120mm/140mm front, 120mm rear) to enhance cooling, especially if using high-performance components. Ensure fans are oriented to create a positive or neutral pressure airflow for better dust control.
- Headphone Stand: Don't forget to utilize the adjustable wooden handle as a convenient and stylish headphone stand when not transporting your PC.
- Regular Cleaning: Make a habit of regularly cleaning the dust filters and the interior of the case to maintain component longevity and performance.
8. Warranty and Support
JONSBO products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official JONSBO website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact JONSBO customer service through their official channels. Keep your proof of purchase handy when contacting support.