Chiller Controller K.SF305000A

Contents

User Manual: K.SF305000A Ice Machine Chiller Controller

Model: K.SF305000A (Replaces GW511A)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the K.SF305000A Chiller Computer Motherboard, also known as the GW511 Circuit Display Board. This controller is designed for industrial chiller applications, including ice machines and general refrigeration systems. It offers precise control and monitoring capabilities to ensure efficient and reliable operation of your equipment.

2. Product Components

The K.SF305000A Chiller Controller kit typically includes the following components:

  • Chiller Motherboard (K.SF305000A)
  • Display Board
  • Ribbon Cable for connecting mainboard and display board
  • Temperature Sensing Line
  • Install Iron Plate
Chiller Motherboard and Display Board
Figure 2.1: K.SF305000A Chiller Motherboard and Display Board connected by ribbon cable.
Full K.SF305000A Chiller Controller Kit
Figure 2.2: Complete kit including mainboard, display board, temperature sensing line, and mounting plate.

3. Specifications

Feature Description
Model Number K.SF305000A
Product Name Chiller controller
DIY Supplies Electrical
Origin Mainland China (Fujian, China)
Certification CE
Operating Language English
Application Commercial, Refrigeration Parts
Power Source USB, Electric
Hign-concerned Chemical None

4. Setup and Installation

Careful installation is crucial for the proper functioning of the chiller controller. Refer to the wiring diagram and dimensions provided below for accurate setup.

4.1 Component Overview

Close-up of Chiller Motherboard K.SF305000A
Figure 4.1: Close-up view of the K.SF305000A Chiller Motherboard, showing various connectors and components.
Close-up of Display Board
Figure 4.2: Close-up view of the Display Board, featuring digital displays and control buttons.

4.2 Wiring and Dimensions

The following diagram illustrates the dimensions of the mainboard and display board, along with key connection points. Ensure all connections are secure and correctly aligned according to the diagram.

Wiring Diagram and Dimensions for Mainboard and Display Board
Figure 4.3: Technical drawing showing mainboard dimensions (200x100mm) and display board dimensions (84x55mm), along with various connection points (J3, COM, J2, COM1, T1, etc.) and button layout (S1-S8).

Key Connection Points:

  • Mainboard (K.SF305000A): Features terminals labeled J3, COM, J2, COM1, T1, and various numbered pins (1-7, 1-8) for input/output connections. A transformer is visible for power supply.
  • Display Board: Connects to the mainboard via a ribbon cable. It has two 4-digit displays (DISP1, DISP2) and eight control buttons (S1-S8).
  • Power Input: Connect the main power supply to the designated terminals (e.g., T1 area, typically 220-240VAC as seen on similar boards).
  • Sensor Connections: Connect the temperature sensing line to the appropriate terminals on the mainboard (e.g., NTC1, NTC2).
  • Output Connections: Connect compressor, pump, and other controlled components to the relay outputs (e.g., CUR1, CUR2, and other numbered terminals).

Ensure all wiring adheres to local electrical codes and safety standards. Professional installation is recommended.

5. Operating Instructions

The chiller controller features an intuitive display panel for monitoring and control. Below is an overview of the control panel elements and their functions.

Industrial Chiller Control Panel Interface
Figure 5.1: Industrial Chiller Control Panel, showing indicators, digital displays, and control buttons.

5.1 Indicators

  • POWER: Illuminates when the unit is powered on.
  • RUN: Illuminates when the chiller system is operating.
  • ERROR: Illuminates when an error condition is detected. Refer to the troubleshooting section for error codes.
  • COMP1: Indicates Compressor 1 status.
  • COMP2: Indicates Compressor 2 status.
  • PUMP: Indicates pump status.

5.2 Digital Displays

  • PV (Process Value): Displays the current measured temperature or other process parameter.
  • SV (Set Value): Displays the target or set temperature/parameter.

5.3 Control Buttons

  • RESET: Used to clear error states or restart the system.
  • SET: Enters parameter setting mode.
  • UP (▲): Increases the set value or navigates menu options.
  • DOWN (▼): Decreases the set value or navigates menu options.
  • PUMP (ON/OFF): Controls the pump operation.
  • COMP1 (ON/OFF): Controls Compressor 1 operation.
  • COMP2 (ON/OFF): Controls Compressor 2 operation.
  • OFF: General system off button.

To adjust settings, press the SET button, use UP/DOWN to change values, and press SET again to confirm. Consult the full programming manual (if available) for advanced parameter configurations.

6. Maintenance

To ensure the longevity and optimal performance of your K.SF305000A chiller controller, follow these general maintenance guidelines:

  • Cleaning: Keep the display panel and mainboard free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners directly on the electronic components.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or system failures.
  • Environment: Ensure the controller is operated within its specified environmental conditions (temperature, humidity) to prevent damage.
  • Inspection: Regularly inspect the board for any signs of physical damage, burnt components, or unusual odors.

7. Troubleshooting

The control panel provides error codes to help diagnose common issues. Refer to the list below for explanations and potential solutions.

Error Code Description Possible Solution
E01 Reverse phase Check power phase connections.
E02 #1 Comp. high press. Check Compressor 1 high-pressure switch, refrigerant charge, and condenser.
E03 #1 Comp. low press. Check Compressor 1 low-pressure switch, refrigerant charge, and evaporator.
E04 #1 Comp. overload Check Compressor 1 current draw and motor protection.
E05 #2 Comp. high press. Check Compressor 2 high-pressure switch, refrigerant charge, and condenser.
E06 #2 Comp. low press. Check Compressor 2 low-pressure switch, refrigerant charge, and evaporator.
E07 #2 Comp. overload Check Compressor 2 current draw and motor protection.
E08 Cold medium short Inspect cold medium circuit for shorts or blockages.
E09 Cold pump overload Check cold pump current draw and motor protection.
E10 Cold medium short/fan overheat Check cold medium circuit and fan operation/temperature.
E11 Cool pump/fan overload Check cool pump/fan current draw and motor protection.
E12 Low temp Check temperature sensor, setpoint, and cooling capacity.
E13 Sensor open Check temperature sensor wiring and connection.
E14 Sensor short Check temperature sensor for short circuit or damage.
E15 Freezing Check temperature setpoint, defrost cycle, and refrigerant flow.

If an error persists after attempting the suggested solutions, please contact technical support.

8. User Tips

  • Double-check Connections: Before powering on, always verify that all wires are correctly connected and securely fastened to prevent damage or malfunction.
  • Power Cycle for Reset: For minor glitches, a simple power cycle (turning the unit off and then back on after a few seconds) can often resolve temporary issues.
  • Consult a Professional: If you are unsure about any wiring or installation steps, it is highly recommended to consult a qualified electrician or HVAC technician.

9. Warranty and Support

9.1 Warranty Information

This product comes with a 1-Year Warranty from the date of purchase. The warranty covers manufacturing defects and includes Free Spare Parts for eligible repairs.

Please retain your proof of purchase for warranty claims.

9.2 Technical Support

For technical assistance, troubleshooting, or warranty inquiries, please contact our support team:

  • WhatsApp: +8619173134473
  • Email: 2393500355@qq.com / xinyuliu966@gmail.com

Our support team aims to reply within 24 hours.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.