1. Introduction
The NANKADF DC Power Supply is a miniature switching DC power supply designed for precision and versatility. It features encoder adjustment for accurate control of output voltage and current, along with a high-precision 4-digit LED display that intuitively shows voltage, current, and power. This series also includes a USB fast charging interface with display, supporting various fast charging protocols. It is an ideal tool for production line testing, mobile phone and computer maintenance, circuit board testing, battery charging, DIY experiments, and laboratory use.

Figure 1: NANKADF DC Power Supply Overview
2. Safety Information
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always connect the power supply to a grounded electrical outlet.
- Ensure the input voltage selector switch on the rear panel is set to the correct voltage for your region (115V or 230V) before plugging in the unit. Incorrect voltage can cause severe damage.
- Do not operate the power supply in wet or damp conditions.
- Do not open the casing of the power supply. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Ensure proper ventilation. Do not block the cooling fan or vents.
- Always connect the output leads with correct polarity (red to positive, black to negative).
- Avoid short-circuiting the output terminals for extended periods, even with OCP enabled.
3. Package Contents
Carefully unpack the box and verify that all items are present and undamaged:
- NANKADF DC Power Supply Unit
- AC Power Cord (Standard: National, American, European, British, etc. - specific type included)
- Operation Manual
- Output Test Cables (with alligator clips)

Figure 2: Package Contents
Video 1: Unboxing and Demonstration of the NANKADF DC Power Supply, showing fast charging and encoder adjustment.
4. Product Overview

Figure 3: Front Panel Product Details

Figure 4: Rear Panel Safety Assurance Components
5. Setup
- Unpacking: Carefully remove the power supply and all accessories from the packaging. Retain the packaging for future storage or transport.
- Input Voltage Selection:
- Locate the red voltage selector switch on the rear panel of the power supply.
- Ensure this switch is set to the correct voltage for your region (115V for North America, parts of Japan, etc., or 230V for Europe, most of Asia, etc.).
- WARNING: Setting the switch to an incorrect voltage can severely damage the unit.

Figure 5: Input Voltage Switch and Fuse Box

Figure 6: Input Change-over Switch
- Power Connection: Connect the provided AC power cord to the power supply's input socket and then to a properly grounded wall outlet.
- Output Cable Connection: Connect the red output test cable to the positive (+) terminal and the black output test cable to the negative (-) terminal on the front panel. Ensure connections are secure.
6. Operating Instructions
- Power On/Off: Press the 'POWER' switch on the front panel to turn the unit ON or OFF.
- Voltage and Current Adjustment: The unit uses encoder knobs for precise adjustment.
- Voltage Adjustment: Rotate the 'VOLTAGE' knob. For fine adjustment, press the knob to toggle between the digits (0-9) on the display, then rotate to set the value.
- Current Adjustment: Rotate the 'CURRENT' knob. For fine adjustment, press the knob to toggle between the digits (0-9) on the display, then rotate to set the value.

Figure 7: Encoder Knob Combinations for Adjustment

Figure 8: Precision Encoder Adjustment
- Output Enable/Disable: Press the 'OUT' button to enable or disable the power output to your load. The output indicator light will illuminate when the output is active.
- USB Fast Charging: Connect your mobile device or other compatible electronics to the USB-A or USB-C fast charging ports. The dedicated USB display will show the charging voltage and current in real-time. This feature supports various fast charging protocols with up to 18W output.
- Short Circuit Protection (OCP): The unit is equipped with an Over-Current Protection (OCP) feature. If a short circuit occurs in the output, the machine will automatically stop outputting and provide an alarm prompt. To turn on/off the short-circuit protection function, press and hold the current adjustment knob for 3 seconds.
- Data Storage Memory (M1-M3): Some models feature M1, M2, and M3 buttons to save and recall frequently used voltage/current settings. This is extremely convenient and time-saving.
- To Save a Setting: Adjust the desired voltage and current, then press and hold an M button (M1, M2, or M3) until the unit beeps or the display indicates it's saved.
- To Recall a Setting: Briefly press the desired M button (M1, M2, or M3).

Figure 12: Data Storage Memory (M1-M3)

Figure 9: USB Fast Charging Interface with Display

Figure 10: USB-A & Type-C Charging Ports

Figure 11: Short Circuit Alarm Prompt
7. Maintenance
- Cleaning: Ensure the power supply is turned off and unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents. Keep ventilation openings clear of dust and debris to ensure proper cooling.
- Fuse Replacement: If the unit does not power on, the fuse may need replacement. Turn off and unplug the unit. Locate the fuse box on the rear panel (refer to Figure 5). Open the fuse box, remove the old fuse, and replace it with a fuse of the same type and rating.
8. Troubleshooting
- No Power:
- Check if the power cord is securely connected to both the unit and the wall outlet.
- Verify the input voltage switch (115V/230V) on the rear panel is set correctly.
- Check the fuse in the fuse box and replace if blown (see Maintenance section).
- No Output:
- Ensure the 'OUT' button is pressed and the output indicator light is illuminated.
- Check for any short circuits in your connected load.
- Verify that the voltage and current settings are not set to zero.
- Incorrect Readings:
- Ensure proper connection of all test leads.
- If possible, compare readings with a calibrated multimeter to confirm accuracy.
- OCP (Over-Current Protection) Triggered:
- Reduce the load current or increase the current limit setting using the 'CURRENT' knob.
- Check for short circuits or excessive current draw in the connected circuit.
9. Specifications
| Feature | Description |
|---|---|
| Model No. | GA305H / GA3010H / GA605H / GA1203H (and other variants) |
| Output Power | 160W (GA305H), 320W (GA3010H), 310W (GA605H), 360W (GA1203H) |
| Output Voltage | 0~32V (GA305H/GA3010H), 0~62V (GA605H), 0~120V (GA1203H) |
| Output Current | 0~5A (GA305H/GA605H), 0~10A (GA3010H), 0~3A (GA1203H) |
| Auxiliary Function | USB fast charging output with display (supports multiple fast charging protocols) |
| Protection Mode | Over-voltage protection (OVP), over-current protection (OCP), over-temperature protection |
| Input Power Supply | AC 230V/115V±10%; 50Hz/60Hz |
| Operating Temperature | 0℃~40℃ |
| Relative Humidity (Operating) | <80%RH |
| Storage Temperature | -10℃~70℃ |
| Relative Humidity (Storage) | <70%RH |
| Voltage Stabilization (CV) | |
| Voltage stability | 0.5%±3mV |
| Load stability | 0.5%±3mV |
| Ripple voltage | ≤0.5% Vp-p |
| Adjustment | 0 to rated voltage continuously adjustable |
| Current Stabilization (CC) | |
| Current stability | 0.5%±3mA |
| Load stability | 0.5%±3mA |
| Ripple current | ≤0.5% Vp-p |
| Recovery time | ≤500μS |
| Temperature coefficient | ≤100ppm/°C |
| Adjustment | 0 to rated current continuously adjustable |
| Meter Display | |
| Main Display | 0.4-inch white light four digital tube (Voltage, Current, Power) |
| USB Display | 0.25-inch green light three digital tube (Voltage, Current) |
| Display accuracy | 0.5%±5 words |
| Display Resolution | Voltage 0.01V, Current 0.001A / USB: Voltage 0.01V, Current 0.01A |
| Physical Characteristics | |
| Product Size (L x W x H) | 190mm x 80mm x 145mm (7.48in x 3.15in x 5.71in) |
| Bare Weight | 1.15Kg (approx. 2.54lb) |
| Weight with packing accessories | 1.5Kg |
10. User Tips
- Verify Specifications: Upon receiving your power supply, always double-check the model number and its corresponding voltage and current specifications against your order to ensure you have the correct unit.
- Precise Adjustments: For very fine adjustments of voltage or current, remember to press the encoder knob to select the specific digit you wish to change, then rotate the knob. This allows for granular control.
- Start Low: When connecting to a new circuit or sensitive electronics, it's good practice to start with the voltage and current limits set to their minimums and gradually increase them to the desired levels.
11. Warranty and Support
For specific warranty terms and conditions, please refer to the warranty card included with your product. For technical support, troubleshooting assistance, or any service-related inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased.