1. Product Overview
The SONICAKE Portal QDS-06 is an active multi-channel signal mixer and line selector designed for guitar effects. It offers two primary working modes: parallel and series, providing versatile signal routing options for musicians.
In parallel mode, the signal mixer features two send/return loops and one main output. This allows for combining three independent inputs into a single output, or it can function as an active ABY pedal. In series mode, channels A and B are connected in series. When the A/B switch is closed, either channel A or B is bypassed. When all three channels (A, B, and C) are turned off, the pedal operates in true bypass mode, ensuring a clean signal path.
The pedal is housed in a durable full metal casing and features high-quality footswitches and potentiometers for precise control.

2. Features
- Analog active signal mixer and line selector.
- Two working modes: parallel and series.
- Three independent channels (A, B, C) with individual volume control.
- True Bypass Circuit for a clean signal path when all channels are off.
- Phase inversion function for channels A and B.
- High-quality footswitches and potentiometers for precise adjustments.
- Durable full metal casing.
3. Setup
3.1 Power Connection
The SONICAKE Portal requires a DC 9V power supply with a 5.5x2.1mm barrel connector and center-negative polarity. The current draw is 97mA. Ensure you use a compatible power supply (not included) to prevent damage to the unit.

3.2 Connecting Your Gear
The pedal features various input and output jacks on its rear panel for flexible signal routing.

Connections:
- INPUT: Main instrument input.
- SND A / RTN A: Send and Return for Channel A effect loop.
- SND B / RTN B: Send and Return for Channel B effect loop.
- OUTPUT: Main signal output.
- DC 9V (Input): Power input for the pedal.
- DC 9V (Output): Additional DC 9V power output for daisy-chaining other pedals.
Connect your guitar or other instrument to the INPUT jack. Connect the OUTPUT jack to your amplifier or the next pedal in your signal chain. Use the SND A/B and RTN A/B jacks to integrate external effects pedals into the respective channels.
4. Operating Instructions
4.1 Controls Overview

The Portal pedal features the following controls:
- Footswitches (A, B, C): Activate/deactivate individual channels.
- Volume Knobs (A, B, C): Independently control the volume of each channel.
- Mode Switch (-A-B- / {A}-B): Toggles between Parallel and Series working modes.
- Phase Inversion Buttons (A, B): Invert the phase for channels A and B.
4.2 Working Modes
The Portal offers two distinct working modes, selectable via the toggle switch:

4.2.1 Series Mode (-A-B-)
In this mode, channels A and B are connected in series. If both A and B footswitches are on, the channels are in series. If one of the footswitches (A or B) is off, that specific channel is bypassed.
4.2.2 Parallel Mode ({A}-B)
In parallel mode, the signal mixer has two send/return loops (A and B) and one main output. This allows for combining three independent inputs (A, B, and C) into one output, or it can be used as an active ABY.
4.3 True Bypass
When all three footswitches (A, B, and C) are turned off, the signal path is true bypass. This means your instrument's signal passes directly through the pedal without any electronic interference, preserving your original tone.

4.4 Phase Inversion
The phase inversion function for channels A and B can be used to correct phase issues that may arise when mixing signals, especially in parallel setups. This ensures optimal sound quality and prevents signal cancellation.
5. Maintenance
To ensure the longevity and optimal performance of your SONICAKE Portal pedal, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents, which can damage the finish.
- Storage: Store the pedal in a dry environment, away from extreme temperatures and humidity.
- Power Supply: Always use a regulated 9V DC center-negative power supply. Incorrect power can damage the unit.
- Connections: Periodically check all cable connections for wear and tear. Ensure jacks are free of dust and debris.

6. Troubleshooting
- No Sound:
- Check all cable connections (input, output, send/return loops).
- Ensure the power supply is correctly connected and providing the specified 9V DC center-negative power.
- Verify that the volume knobs for the active channels are not set to zero.
- Confirm that the footswitches for the desired channels are engaged.
- Buzzing/Noise:
- Ensure you are using a high-quality, isolated power supply.
- Check for ground loops in your pedalboard setup.
- Some users have reported that insulating the inside of the case with copper adhesive can help reduce interference.
- Test the pedal in isolation to determine if the noise originates from the pedal itself or other components in your signal chain.
- Phase Issues:
- If you experience thin or hollow sounds when mixing signals, use the phase inversion buttons for channels A and B to correct phase alignment.
7. Specifications
| Parameter | Value |
|---|---|
| Power | DC 9V, 5.5x2.1mm center negative, 97mA |
| Dimensions (D x W x H) | 124mm x 90mm x 54.8mm |
| Weight | 389g |
| Input Impedance | 1MΩ |
| Output Impedance | 1kΩ |
| Send A Impedance | 1kΩ |
| Send B Impedance | 1kΩ |
| Return A Impedance | 100kΩ |
| Return B Impedance | 100kΩ |
8. User Tips
- Versatile Mixer: Think of the Portal as a versatile mixer rather than a traditional looper, as it does not have memory for recording loops.
- Bass Guitar Application: This pedal is highly effective for bassists who wish to use effects while preserving the original tone of their instrument.
- Wet/Dry Mixing: Excellent for creating wet/dry or even wet/dry/wet mixes, allowing for complex signal routing and blending of modulation effects with your dry signal, especially useful with high-gain setups.
- Amp Modeling: Can be used to run amp modeling pedals in parallel and series for amp-less setups, blending dry signals on channel C and parallel amp sounds with phase switching on A and B.
- Pedalboard Integration: Its compact size makes it easy to fit onto most pedalboards. However, be mindful of the layout of the jacks, as angled jacks can make connections clumpy. Consider using straight jacks or leaving adequate space if using many angled connectors.
- Phase Correction: Utilize the phase inversion function to resolve any phase cancellation issues when combining signals from different effects or sources.
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer at the time of purchase. For further support or inquiries, please contact SONICAKE customer service.
A detailed user manual in PDF format can be found here: SONICAKE Portal User Manual (PDF)