LAUNCH CRP919E BT

Contents

LAUNCH X431 CRP919E BT Car Diagnostic Tool User Manual

Model: CRP919E BT

Advanced ECU Coding, Bi-directional Control, Full System Diagnostics with 35+ Reset Functions

1. Introduction

The LAUNCH X431 CRP919E BT is an advanced diagnostic tool designed for comprehensive vehicle troubleshooting. It leverages LAUNCH's cutting-edge diagnostic technology to provide accurate test results across a wide range of vehicles. This tool facilitates full car model and full system vehicle trouble diagnosis through simple wireless/wired communication between the VCI (Vehicle Communication Interface) device and the display tablet.

Key functions include Reading DTCs, Clearing DTCs, Reading Data Stream, Actuation Test, and various Special Functions. It features an Android 10.0 OS, a 2.0GHz 4-core processor, 4GB RAM, 64GB ROM, an 8MP rear camera, and a 6300mAh battery. The device supports CAN FD and DOIP protocols for faster communication and is compatible with over 115 car brands and 10,000+ models.

Product Overview Video: This video demonstrates the key features and capabilities of the LAUNCH X431 CRP919E BT diagnostic tool, including its hardware, full system diagnostics, ECU coding, bi-directional control, and maintenance services.

2. Important Safety Precautions

To prevent personal injury, property damage, or accidental damage to the product, please read all safety information before use.

2.1. DANGER

  • When an engine is operating, ensure the service area is well-ventilated or use a building exhaust removal system. Engines produce poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.) that can cause serious injury or death.
  • Use only the included battery and power adapter. Replacing the battery with an incorrect type poses an explosion risk.
  • DO NOT operate the tool while driving. Always have a second person operate the tool if troubleshooting requires driving, to prevent accidents.

2.2. WARNING

  • Always perform automotive testing in a safe environment.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
  • Before starting the engine, ensure the gear lever is in Neutral (manual transmission) or Park (automatic transmission) to prevent injury.
  • NEVER smoke or allow sparks or flames near the battery or engine. Do not operate the tool in explosive atmospheres.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Wear ANSI-approved eye protection when testing or repairing vehicles.
  • Place blocks in front of the drive wheels and never leave the vehicle unattended during testing.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs, as these components create hazardous voltage.
  • To avoid damaging the tool or generating false data, ensure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
  • Automotive batteries contain sulfuric acid. Avoid direct contact with batteries. Keep ignition sources away from the battery.
  • Keep the tool dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
  • Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
  • Store the tool and accessories in a locked area out of reach of children.
  • Do not use the tool while standing in water.
  • Do not expose the tool or power adapter to rain or wet conditions to prevent electric shock.
  • This tool is a sealed unit with no end-user serviceable parts. All internal repairs must be performed by an authorized repair facility or qualified technician.
  • Keep the tool away from magnetic devices, as their radiation can damage the screen and erase data.
  • Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for factory replacement.
  • Do not disconnect the battery or any wiring cables in the vehicle when the ignition switch is on, as this could damage sensors or the ECU.
  • Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations.
  • Use extreme caution when performing operations near the ECU or sensors. Ground yourself when disassembling PROM to prevent damage from static electricity.
  • When reconnecting the ECU harness connector, ensure it is firmly attached to prevent damage to electronic components.

3. Package List

The following items are included in your LAUNCH X431 CRP919E BT package. Please note that accessories may vary by destination.

  • Display Tablet (x1): The central processing unit and display for test results.
  • VCI Connector (x1): A device for accessing vehicle live data.
  • Diagnostic Cable (x1): Connects the VCI connector to the vehicle's OBD II diagnostic socket. It can be separated into two parts: HDB15F to HD15F data cable and HD15M to OBD II adaptor.
  • Password Envelope (x1): Contains the product Serial Number and Activation Code for registration.
  • Power Adapter (x1) + Switching Adapters (x2): For charging the tablet via AC outlet. Includes US, UK, and EU charger types.
  • Type-A to Type-C USB Cable (x1): Connects the diagnostic tool to an AC outlet/PC for charging/data exchange, or connects the VCI connector to the diagnostic tool for vehicle diagnosis.
  • Quick Start Guide (x1): Provides essential setup and usage instructions.
  • Plastic Package/Carrying Case (x1): Sturdy case for storage and transportation.
LAUNCH X431 CRP919E BT Package Contents
Package Contents: A view of the LAUNCH X431 CRP919E BT diagnostic tool, VCI connector, cables, power adapters, and documentation neatly organized in its carrying case.

4. Components & Controls

The diagnostic system consists of two main components: the Display Tablet and the VCI Device.

4.1. Display Tablet

The tablet serves as the central processing system, receiving and analyzing live vehicle data from the VCI device and displaying test results.

Display Tablet Front View
Display Tablet Front View: Shows the 7-inch LCD touchscreen with the main diagnostic interface.
Display Tablet Rear View
Display Tablet Rear View: Features the LAUNCH branding and input specifications (INPUT: 5V 5A).

Tablet Features:

  • Microphone: For audio input.
  • Type-A USB Port: Connects to the VCI connector for wired diagnosis or to an external USB storage device for data exchange.
  • Type-C USB Port: Connects to an AC outlet for charging or to a PC for data exchange.
  • POWER Key: Press for 3 seconds to turn on/off. Single press to activate/deactivate LCD. Press and hold for 8 seconds for forced shutdown.
  • LCD Screen: 7-inch capacitive touch screen (1024x600 pixels) for displaying test results.
  • Speakers: For audio output.
  • Rear Camera: 8.0MP camera.

4.2. VCI Connector

The VCI connector acts as a Vehicle Communication Interface, connecting to the vehicle's DLC (Data Link Connector) socket via the diagnostic cable to read and transmit vehicle data to the tablet.

VCI Connector
VCI Connector: The wireless diagnostic module with indicator lights and OBD-15 diagnostic connector.

VCI Features:

  • OBD-15 Diagnostic Connector: Connects to the vehicle's OBD II DLC via the diagnostic cable.
  • USB Port: Connects the VCI to the tablet for wired vehicle diagnosis.
  • I/O Indicator: Illuminates blue for wireless communication with the tablet, red for wired USB connection.
  • VEHICLE Indicator: Illuminates green and flashes when communicating with the vehicle.
  • POWER Indicator: Illuminates solid red when the VCI is powered up.

5. Technical Specifications

5.1. Display Tablet

  • Operating System: Android 10.0
  • Processor: 2.0GHz, Quad-core
  • Memory (RAM): 4GB
  • Storage (ROM): 64GB (System Display: 25GB)
  • Screen: 7-inch capacitive touch screen with 1024*600 resolution
  • Camera: Rear-facing 8.0MP camera
  • Connectivity: Wi-Fi (802.11a/b/g/n/ac), Bluetooth
  • Working Temperature: 0°C ~ 50°C
  • Storage Temperature: -20°C ~ 70°C
  • Battery Capacity: 6300mAh (7.6V), Equivalent: ≈12600mAh (3.7V)
  • Power Consumption: ≈47.8Wh
  • Charging Power: 5V 5A (25W)
  • Item Weight: 3.5kg
  • External Testing Certification: CE, FCC

5.2. VCI Connector

  • Working Voltage: 9 ~18V
  • Power Consumption: ≤2.0W
  • Dimension: 118.3mm*69.5mm*32mm
  • Working Temperature: 0°C ~ 50°C
  • Relative Humidity: 20% ~ 90%

5.3. Supported Languages (Global Version)

English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Arabic, Turkish, Dutch, Greek, Hungarian, Danish, Persian, Serbian, Finnish, Swedish, Czech, Traditional Chinese, Simplified Chinese.

5.4. Supported Languages (RU EU UK Version)

English, Russian, German, Italian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Danish, Serbian, Finnish, Swedish, Czech, Romanian.

Language Support
Language Support: The diagnostic tool supports 25 languages, including English, French, Spanish, German, Russian, and more, catering to a global user base.

6. Initial Use (Setup)

6.1. Charging & Turning On

  1. Use the included power adapter to charge the tablet.
  2. After charging, press the POWER button for 3 seconds to turn the tablet on. The system will initialize and display the home screen.

Note: If the battery is completely discharged or unused for a long time, it may not power on immediately when charged. Charge it for at least 5 minutes before attempting to turn it on. Always use the supplied power adapter to avoid damage.

6.2. Screen Layout & Basic Gestures

The tablet features five on-screen buttons at the bottom:

  • Home: Navigates to the Android home screen.
  • Recent App: Displays running applications.
  • VCI Connection: Indicates VCI device connection status (green for established communication).
  • Screenshot: Captures the current screen.
  • Back: Returns to the previous screen.

Basic touch gestures:

  • Single-tap: Selects an item or launches a program.
  • Double-tap: Zooms in on text on a webpage.
  • Long press: Taps and holds to bring up a contextual menu.
  • Slide: Navigates between pages.

6.3. System Settings

  • Change System Language: Go to Other Modules > Settings > System > Language & input > Languages. Add your desired language and drag it to the top of the list.
  • Adjust Brightness: Go to Other Modules > Settings > Display > Brightness level. Drag the slider to adjust. (Reducing brightness conserves battery.)
  • Set Standby Time: Go to Other Modules > Settings > Display > Advanced > Sleep. Choose the desired sleep time.
  • Network Setup (Wi-Fi): Go to Other Modules > Settings > Network & Internet > WLAN. Turn Wi-Fi ON, select a network, and enter the password if encrypted. (Disable Wi-Fi when not needed to conserve battery.)

7. Getting Started (Registration & Update)

7.1. User Registration

New users must register before using the tool:

  1. Tap Login on the upper right corner of the home screen.
  2. Tap New Registration on the login window.
  3. Fill in all required information (marked with *) and tap Register.
  4. Input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope) and tap Activate.

Note: After successful registration, wireless communication between the tablet and VCI is automatically established. The tablet has an auto-save function for login credentials.

7.2. Software Update

This module allows you to update diagnostic software and applications.

  1. Go to Software Update on the Home screen.
  2. The Available tab lists software updates, categorized as Common, Frequently Used Vehicle, and Other Vehicle software.
  3. Check the desired software and tap Update to start downloading. Once downloaded, the software will install automatically.

Note: If the software subscription expires, you will be prompted to renew. Renewal can be done via PayPal, Subscription Renewal Card (purchased from the seller), or Credit Card.

8. Operation (Diagnosis)

The LAUNCH X431 CRP919E BT offers comprehensive diagnostic functions for various vehicle systems.

8.1. OE-LEVEL All Systems Diagnostic

This tool supports full system diagnostics for 99% of vehicles worldwide, covering Drive System (Engine, Transmission), Chassis System (Steering, Braking, TPMS), Body System (SRS Airbag, Camera, Audio Radio, Immobilizer), and Electrical System. It performs fast full-system scans with clear, detailed results.

OE-Level All Systems Diagnostics
OE-Level All Systems Diagnostics: Illustrates the comprehensive diagnostic capabilities across various vehicle systems like Engine, SRS, ABS, and more, with VIN scanning and live data display.

8.2. Intelligent Diagnose

This module uses VIN information to access vehicle data (including historical diagnostic records) from the cloud server, performing quick tests and eliminating manual menu selection. A stable network connection and proper VCI connection are required.

  1. Tap Intelligent Diagnose on the Home screen.
  2. The tablet will pair with the VCI and read the vehicle VIN.
  3. If VIN is found, it displays vehicle information and diagnostic options (Diagnostic or Scan History).

8.3. Local Diagnose

For manual diagnosis, follow on-screen instructions:

  1. Tap Local Diagnose to enter the vehicle selection page.
  2. Select the vehicle brand and model.
  3. Turn the ignition key to ON.
  4. Confirm vehicle information.
  5. Select the desired test item.

8.3.1. Read Fault Code

Displays detailed information of DTCs (Diagnostic Trouble Codes) retrieved from the vehicle's control system.

Caution: DTCs are only one part of troubleshooting. Always refer to the vehicle's service manual for testing procedures and flowcharts.

8.3.2. Clear Fault Code

Erases DTCs from the vehicle after repairs. Ensure the ignition key is ON and the engine is OFF. Clearing DTCs does not fix the underlying problem.

8.3.3. Read Data Stream

Views and records real-time Live Data, including operating status for parameters and sensor information. This data helps diagnose vehicle performance.

Caution: Do not operate the tool while driving alone. Have a second person assist to prevent accidents.

Data can be displayed in three modes:

  • Value: Default mode, displays parameters in text list format.
  • Graph: Displays parameters in waveform graphs.
  • Combine: Merges up to 4 graphs for data comparison, with different colors for each item.

8.4. Actuation Test (Bi-directional Control)

This function allows you to send commands to the ECU to drive actuators and test system integrity. It can actuate relays, injectors, coils, or perform system tests. Available tests vary by vehicle.

Bi-Directional Control Examples
Bi-Directional Control: Examples of active tests such as turning on/off lights, opening/closing windows, and controlling wipers, demonstrating the tool's ability to send commands to vehicle components.

8.5. Advanced ECU Coding

The tool supports ECU Coding for various functions:

  • Online Coding: For VW, Audi, Skoda.
  • Variant Coding / Offline Programming.
  • Flash Hidden Functions.
  • Reset Adaptive Data.
  • Match Replaced Components.
  • Customize OE-Settings: E.g., retrofitting lamps, battery capacity changes, disabling auto start-stop, sunroof initialization, injector calibration.

Note: Coding functions vary by model and year.

Next-Level ECU Coding
Next-Level ECU Coding: Details online coding for VW/Audi/Skoda/Ford/Lincoln/Mazda, PMI function, online parametric configuration, online matching & calibration, and component matching features like resetting adaptive data and recoding replaced parts.

8.6. CAN FD & DOIP Protocol Support

The CRP919E BT supports new CAN FD and DOIP protocols, enabling faster vehicle communication.

  • CAN FD: Compatible with latest GM vehicles (2020 onwards) like Chevrolet Onix, Tracker, Suburban, Tahoe, Buick, Cadillac Escalade, GMC Yukon, Holden, DAEWOO, Alpheon, Ravon, Pontiac, Saturn, Hummer.
  • DOIP: Compatible with BMW (F&G chassis), Volvo (2018 later), Land Rover & Jaguar (2017 later).

8.7. FCA SGW AutoAuth

Supports AutoAuth for FCA vehicles (Chrysler, Dodge, Fiat, etc., after 2017) equipped with a security gateway module (SGW) for secure diagnostics and active testing. (Requires extra payment for account).

9. Service (Reset) Functions

The tool offers 35+ maintenance and reset functions to restore vehicle systems to functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and model. Regular updates are recommended to access new functions.

35+ Special Functions Overview
35+ Special Functions Overview: A visual representation of various maintenance services including TPMS Reset, ABS Bleeding, Throttle Relearn, Oil Reset, DPF Regeneration, SAS Reset, Brake Reset, Gear Learning, and Injector Coding.

Common Reset Functions:

  • SAS Reset (Steering Angle Reset): Resets the steering angle after replacing components or performing alignment.
  • Electronic Parking Brake Reset: Resets the brake pad after replacement.
  • Gear Learning: Learns crankshaft gear machining tolerance for accurate engine misfire diagnosis.
  • Oil Reset (Maintenance Light Reset): Resets the oil service light and calculates a new oil life interval.
  • IMMO Reset (Anti-theft Matching): Matches anti-theft keys to the immobilizer control system.
  • Injector Coding: Writes or rewrites injector codes to the ECU for accurate fuel injection.
  • TPMS Reset: Resets tire pressure after maintenance or component replacement.
  • Battery Matching: Resets the monitoring unit of the vehicle battery after replacement.
  • ABS Bleeding: Performs bi-directional tests to check ABS operating conditions and bleed air.
  • Electronic Throttle Position Reset: Makes initial settings to throttle actuators.
  • DPF Regeneration (Diesel Particulate Filter): Clears PM from the DPF filter.
  • Air Suspension Calibration: Adjusts body height after sensor or control module replacement.
  • AFS Reset (Adaptive Front-lighting System): Initializes the adaptive headlamp system.
  • Sunroof Initialization: Sets sunroof lock, rain-closing, memory function, etc.
  • Gearbox Matching: Completes gearbox self-learning to improve shifting quality.
  • EGR Adaption: Learns the EGR valve after cleaning or replacement.
  • Language Change: Changes the system language of the vehicle central control panel.
  • A/F Reset: Sets or learns air/fuel rate parameters.
  • Coolant Bleed: Activates the electric water pump for cooling system venting.
  • NOx Sensor Reset: Resets the catalytic converter learned value after NOx fault re-initialization or replacement.
  • Seat Calibration: Matches seats with memory function after replacement.
  • Stop Start Reset: Opens or closes the automatic Start/Stop function via ECU settings.
  • Transport Mode: Deactivates transport mode to restore normal vehicle operation.
  • Tyre Reset: Sets size parameters for modified or replaced tires.
  • Windows Calibration: Performs door window matching to recover ECU initial memory and automatic ascending/descending function.
  • AdBlue Reset (Diesel Engine Exhaust Gas Filter): Required after diesel exhaust treatment fluid replacement or refill.
  • AC System Initialization: Relearns/initializes the air conditioning system after ECU actuator replacement or memory loss.
  • Intelligent Cruise Control System Reset: Matches the intelligent cruise control module after replacement or repair.
  • Engine Power Balance Monitoring: Monitors crankshaft acceleration to determine relative power per cylinder.
  • Motor Angle Calibration: Performs motor angle calibration when rotor position sensor detection differs from actual rotor field position.
  • High Voltage Battery Detection: Diagnoses and detects status information for high voltage batteries.
  • Gas Particulate Filter (GPF) Regeneration: Performs GPF replacement or regeneration after increased fuel consumption and reduced engine output power.
  • Clutch Reset, TURBO Reset, Reset Hide: Additional maintenance features.

10. Other Modules & Expansion

The CRP919E BT supports various other modules and can be expanded with additional tools.

10.1. Other Modules

  • Testable Models: View the vehicle models covered by the tool.
  • Tablet Setting: Quick access to Android system settings.
  • Files: File and application manager, task killer, and download manager.
  • System OTA Upgrade: Performs wireless updates for the operating system, software, or data.
  • Recording Master: Captures high-quality screen videos with or without sound.
  • Calculator: A simple-to-use calculator.
  • Browser: A cross-platform web browser for internet access.
  • Gmail: Email application for managing messages.
  • Camera: Takes pictures or records videos.
  • Gallery: Manages pictures and screenshots.

10.2. Expansion Modules (Sold Separately)

Expansion Modules
Expansion Modules: Illustrates optional accessories like the VSP600 Videoscope, BST360 Battery Tester, Key Programmer, and i-TPMS, which extend the diagnostic capabilities of the tool.
  • LAUNCH X431 i-TPMS: Configures the scan tool as a TPMS activation & diagnostic tool (requires compatible TSGUN/i-TPMS device).
  • LAUNCH VSP600 Videoscope: Checks unseen parts of the engine, fuel tank, and braking system (requires compatible Videoscope).
  • LAUNCH BST360 Battery Tester: Facilitates faster and easier battery detection (requires specific Bluetooth Battery tester).
  • LAUNCH Immobilizer Programmer: Performs read-write functions for vehicle keys, EEPROM, MCU, and ECU EEPROM/FLASH (requires specific immobilizer programmer).
  • LAUNCH Key Programmer: Identifies car key chips, generates chip models, reads remote-control frequencies, and generates remote control devices (requires compatible key programmer).
  • LAUNCH X431 WiFi Printer: Connects to print diagnostic data or reports.

11. Troubleshooting (FAQ)

11.1. How to save power?

  • Turn off the screen when the tool is idle.
  • Set a shorter standby time.
  • Decrease screen brightness.
  • Turn off WLAN (Wi-Fi) if not required.
  • Disable GPS function if not in use.

11.2. How to connect to a non-OBD II vehicle diagnostic socket?

  1. Select the appropriate adapter from the non-16pin adapter kit (sold separately) according to the vehicle's DLC port type.
  2. Loosen the captive screws of the HDB15F to HD15F data cable and disconnect the HD15M to OBD16 adapter from the data cable.
  3. Connect the data cable with the target adapter and tighten the screws.

11.3. Communication error with vehicle ECU?

Please confirm:

  • The VCI is correctly connected.
  • The ignition switch is ON.
  • If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN to us for analysis.

11.4. Failed to enter into ECU system?

Please confirm:

  • The vehicle is equipped with this system.
  • The VCI is correctly connected.
  • The ignition switch is ON.
  • If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN to us for analysis.

11.5. How to download the Diagnostic App after resetting the tablet?

After resetting, ensure network connectivity. Launch the browser, go to www.x431.com, log in, tap 'APP application program', and download. Install the app and log in to download diagnostic software.

11.6. What to do if the language of vehicle diagnostic software does not match the system language?

English is the default. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If it remains in English, the software for your chosen language is under development.

11.7. How to retrieve the login password?

Launch the application, tap Login on the upper right, then tap Retrieve password and follow the on-screen instructions.

12. User Tips

  • Initial Setup: Upon receiving the device, activate it immediately using the provided activation code in the envelope. Connect to Wi-Fi and perform all available updates for optimal performance.
  • Performance: Users report the scanner works quickly and without freezing, with a long-lasting battery.
  • Case Quality: The included carrying case is sturdy and well-organized, making storage and transportation convenient.
  • Language Support: The device supports a wide range of languages, including Brazilian Portuguese, and handles both Chinese and European characters without issues.
  • Compatibility: The tool has been successfully tested on various car brands including Hyundai, Cruze, Nissan, Kia Sorento, and Land Rover models, performing online diagnostics and specific resets like suspension and body control.
  • Updates: The device comes with 2 years of free updates. Ensure you utilize these updates to keep your software current and expand vehicle coverage and functions.
  • Seller Support: The seller is noted for being communicative and responsive to questions.

13. Warranty & Support

13.1. Warranty Information

The LAUNCH X431 CRP919E BT is warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for a defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages. Final determination of defects will be made by LAUNCH according to stipulated procedures.

13.2. Customer Service

If you have any questions regarding the operation of the unit, please contact the seller or customer service center:

  • Tel: 86-755-25938674
  • E-mail: DOD@cnlaunch.com
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.