1. Introduction
Thank you for choosing AUXBEAM LED Light Pods. These high-performance 2-inch square LED lights are designed to provide superior illumination for a variety of applications, including off-road vehicles, ATVs, SUVs, and trucks. Featuring robust construction and advanced lighting technology, these pods enhance visibility and safety in challenging conditions. This manual provides essential information for safe installation, operation, and maintenance of your new LED light pods.
Figure 1: AUXBEAM 2-inch LED Light Pods product overview.
2. Safety & Warnings
Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Electrical Products: Do not expose to water or moisture beyond the IP68 rating.
- Sharp/Dangerous Goods: Handle with care to avoid cuts or injuries during installation.
3. Package Contents
Please check the package to ensure all items are present and undamaged:
- 2 x AUXBEAM 2-inch LED Light Pods
- 1 x Wiring Harness Set (includes relay, fuse, and switch)
- Mounting Hardware (bolts, nuts, washers, Allen key)
- Instruction Manual
- AUXBEAM Sticker
Figure 2: Contents of the AUXBEAM LED Light Pods package.
4. Specifications
Figure 3: Detailed product specifications and dimensions.
| Feature | Specification |
|---|---|
| Light Color | White Light / Amber Light (selectable via SKU) |
| Color Temperature | 6500K (White Light), 3000K (Amber Light) |
| Light Source | 3535 LED Chip |
| Power | 40W / Pair |
| Raw Lumen | 4000LM |
| Light Distance | 1lux@912FT (278M) |
| Service Life | 50,000 Hours |
| Waterproof Rating | IP68 |
| Dimensions (approx.) | 58mm (W) x 58mm (H) x 76mm (D) / 2.3" (W) x 2" (H) x 3" (D) |
| Beam Angle | 30° Spotlight |
Figure 4: Comparison of white and amber spotlight beam patterns.
Figure 5: Light distance and beam distribution diagram.
5. Setup & Installation
Before You Begin:
- Ensure the installation environment is clean, dry, and free of oil, dust, and dirt.
- Inspect the product for any deformation, cracks, damage, or rust before installation.
- Use qualified tools and fasten to standard torque; do not install by force.
- Parts involving electrical, fuel, brake, steering, and transmission systems must be installed by professional technicians.
- Always disconnect the negative battery terminal before installation to avoid short circuits.
Installation Steps:
- Mounting the Lights: Securely attach the LED light pods to your desired location using the provided mounting hardware. The robust U-shaped stainless mounting brackets are adjustable up to 180 degrees, allowing you to direct the light as needed.
- Wiring Connection: The included wiring harness is designed for plug-and-play convenience. Connect the LED pods to the harness. The harness includes an automotive relay, fuse, and a switch for easy integration into your vehicle's electrical system.
- Power Connection: Connect the power leads of the wiring harness to your vehicle's battery (positive to positive, negative to negative). Ensure all connections are secure and properly insulated.
- Test Functionality: Reconnect the negative battery terminal. Turn on the vehicle and test the LED lights using the provided switch.
Figure 6: Versatile installation angle adjustment.
Figure 7: Easy plug-and-play wiring diagram.
Figure 8: Key features including IP68 protection, aluminum frame, and cooling system.
6. Operating Instructions
Once properly installed and wired, operate your AUXBEAM LED Light Pods using the included ON/OFF switch. Simply toggle the switch to turn the lights on or off. Ensure your vehicle's ignition is in the appropriate position to supply power to the lights.
7. Maintenance
- Cleaning: Periodically clean the lens of the LED pods with a soft cloth and mild soap and water to maintain optimal light output. Avoid abrasive cleaners.
- Inspection: Regularly inspect the mounting hardware and wiring connections for tightness and signs of wear or corrosion.
- Water Resistance: The lights are rated IP68 waterproof, meaning they are protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion or high-pressure washing directly on the lights.
8. Troubleshooting
- Lights Not Turning On:
- Check all wiring connections for looseness or corrosion.
- Verify the fuse in the wiring harness is intact. Replace if blown.
- Ensure the battery has sufficient charge and connections are secure.
- Test the switch for proper functionality.
- Dim or Flickering Lights:
- Check for poor ground connections.
- Inspect wiring for damage or partial breaks.
- Ensure adequate voltage supply from the vehicle's electrical system.
9. User Tips
No specific user tips are available at this time. For best performance, ensure lights are aimed correctly to maximize visibility without blinding oncoming traffic.
10. Warranty & Support
For warranty information and technical support, please contact your original seller or AUXBEAM customer service. Keep your purchase receipt as proof of purchase.
Manufacturer Information:
Changsha zhihuan e-commerce co., ltd
Building 1-10 and underground garages and connection platforms of building 1, no. 68 qinglan road, beichen phoenix tianqingyuan, xinhe street, changsha city, hunan province 14035
EU Authorized Representative:
GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
CASTELLANA 9141, 28046 Madrid Spain
compliance.gavimosa@outlook.com
34-88185858