1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MaXpeedingrods T6 Coilovers. Please read this manual thoroughly before attempting any procedures to ensure proper function and safety.
Product Name: Automotive Parts
Model: CVS-68192-R
Batch Number: 20251023
2. Product Compatibility
These T6 Coilovers are specifically designed for:
- For Ford Focus ST Models 2013-2018 only
For specific compatibility details, including vehicle models and configurations, please refer to the product listing page. Ensure that your vehicle matches the provided compatibility information to guarantee optimal performance.
3. Warnings
Always prioritize safety during installation and maintenance.
- Use proper tools to avoid damage to the component or injury.
- If unsure about any procedure, consult a professional technician.
- If the component is connected to other systems, ensure those are inspected simultaneously for compatibility.
4. Package Contents
Please verify that all items are present and undamaged before proceeding with installation:
- 2x Front coil-overs
- 2x Rear coil-overs
- 1x Allen wrench
- 2x C spanners

5. Product Installation
Proper installation is crucial for the performance and safety of your vehicle. If you are not confident in your ability to perform this installation, please seek assistance from a qualified professional.
5.1. Preparation
- Ensure the engine is off and the vehicle is on a flat, stable surface.
- Disconnect the battery (if required) to avoid electrical hazards.
- Gather all necessary tools and safety equipment (e.g., gloves, goggles).
5.2. Component Installation
- Carefully inspect the part for any damage or missing pieces.
- Align the component with the designated area following the vehicle's technical diagram.
- Use the recommended torque settings to tighten bolts or screws to avoid over-tightening or damaging parts.
- Reconnect any electrical connections, hoses, or brackets if applicable.
5.3. Final Inspection
- Double-check all connections and fasteners for security.
- Reconnect the battery (if previously disconnected).
- Perform a quick test (if feasible) to ensure the part is functioning as expected.


6. Operation and Adjustments
The MaXpeedingrods T6 Coilovers are designed to offer a balance of comfort and performance, adaptable to various driving conditions.
6.1. Initial Use
- After installation, monitor the component during the first operation to ensure proper function.
- Pay attention to any unusual sounds, vibrations, or warning lights.
6.2. Adjustments
- Lowered Height Adjustment: The coilovers allow for a height adjustment range of 1" - 3", enabling a lower center of gravity and a more aggressive stance.
- Adjustable Pre-load Spring Tension: This feature helps to reduce shaking motion to a certain extent, contributing to ride comfort.
- 24 Clicks of Rebound Adjustments: This allows you to fine-tune your coilover system.
- For a comfortable daily drive, set damping to full soft.
- For more spirited driving, set it to 16 clicks.
- For occasional track days, set it to full stiff.
These coilovers are perfect for challenging road conditions, urban areas, street driving, highway cruising, off-road adventures, rainy conditions, and snowy environments, providing reliable performance across diverse scenarios.
7. Product Maintenance
7.1. Routine Inspection
- Schedule periodic inspections in alignment with the vehicle's maintenance plan.
- Look for signs of wear, corrosion, or leaks.
7.2. Cleaning & Care
- Clean the part with appropriate solutions (if applicable) to prevent dust and grime buildup.
- Avoid using high-pressure water jets or harsh chemicals that could damage sensitive components.
7.3. Replacement & Service
- Replace the component based on the vehicle's recommended service intervals or if wear is detected.
- If the component is connected to other systems, ensure those are inspected simultaneously for compatibility.
8. Troubleshooting
- If the component does not function correctly, refer to the troubleshooting section (if available).
- Check for loose connections, wear, or damage before consulting a professional.
9. Specifications
| Feature | Detail |
|---|---|
| Type | Oil Pressure |
| Damping Adjustable | Available, 24 levels of rebound damping force |
| Shock Structure Type | Twin-tube |
| Camber Adjustable | Available |
| Height Adjustable | Yes, lowering 25-75mm depending on vehicle models |
| Spring Rate Front | 6 kg/mm (336 lbs/in) |
| Spring Rate Rear | 6 kg/mm (336 lbs/in) |
| Spring Length Front | 160 mm |
| Spring Length Rear | 182 mm |
| Spring Preload Advised | 7-10 mm |
| Color | Black body with blue spring |
| Item Weight | 25200 (units not specified, likely grams) |
| Item Height | 21.5cm |
| Item Width | 51.2cm |
| Item Length | 63cm |
| Product Type | Electronic assembly excluded, Aftermarket replacement part |
| Quantity | 2 piece front + 2 pieces rear |
| Country/Region of Manufacture | CHINA (Mainland China) |
10. User Tips
- For optimal comfort, set the damping to full soft for daily driving.
- When performing maintenance or adjustments, always ensure the vehicle is on a flat, stable surface and the engine is off.
- Regularly check for loose connections, wear, or leaks to maintain peak performance and safety.
- If you encounter any issues or are unsure about a procedure, do not hesitate to consult a professional technician.
11. Customer Service & Manufacturer Information
Customer Service:
Our Customer Service team is available to assist you with inquiries related to the product, returns, repairs, or other support.
Contact Information:
Email: support@maxpeedingrods.com
Manufacturer & EU Representative Info:
Manufacturer: Chongqing Guoyu Technology Co., Ltd.
Manufacturer Address: Tuchang Town, Hechuan District, Chongqing, China
Email: support@maxpeedingrods.com
EU Authorized Representative:
GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
CASTELLANA 9144, 28046 Madrid Spain
Email: compliance.gavimosa@outlook.com
12. Environmental Responsibility
Dispose of old components in accordance with local environmental regulations. Recycle materials when possible, and avoid disposing of automotive parts in regular waste bins.
13. Additional Resources
A detailed user manual in PDF format is available for further reference. You can access it via the following link: User manual (PDF)