Jansite 6.86" Motorcycle DVR Instruction Manual

1. Introduction and Safety Information

Please carefully read the following instructions before operating your Jansite 6.86" Motorcycle DVR. This manual provides essential information for installation, operation, maintenance, and troubleshooting.

Important Safety Warnings:

• This device uses negative electrode grounding and a 12V power supply.
• Always turn off the vehicle's power before installation and only turn it on after installation is complete.
• Plan the optimal location for the navigation recorder component before fixing it.
• Do NOT use a high-pressure water gun to rinse or soak this product in water to prevent water from entering the body.
• When connecting the camera, ensure it corresponds to the body identification.
• The camera is fully enclosed and waterproof, but avoid contact with solvents like degreasing oil, alcohol, or tar cleaning agents to prevent damage to the waterproof layer.
• Regularly clean up storage space for optimal speed and security of file storage.
• Product structure and parameters may be improved over time. Graphics and text are for reference only. Refer to the actual product for any discrepancies.
• This product is designed exclusively for motorcycles.
• Watching video programs and related operations while driving is prohibited by some national laws. For your personal safety and the safety of others, refrain from such activities while driving.
• The navigation function (and optional functions) are aids only and do not imply you can be distracted or careless while driving. The company is not responsible for safety accidents caused by misuse.

2. Product Overview

The Jansite 6.86" Motorcycle DVR is designed specifically for BMW motorcycles (R1200GS, R1250GS, S1000XR) and features a 6.86-inch IPS screen with full-featured Carplay and Android Auto compatibility. It offers dual lens recording, IP67 waterproofing, and various smart functions to enhance your riding experience.

Product Dimensions:

The main unit (Motorcycle Radio) measures approximately 198mm in length and 81mm in height.

Figure: Product dimensions of the 6.86 inch motorcycle radio.

Host Interface:

• MIC Microphone: Receives sound.
• TYPE-C Power Interface: For waterproofing, avoid using this power supply when loading the car. Ensure screws and waterproof cover are tightened.
• TF Card Interface: Remove screws and waterproof flap to access the TF interface. Insert the card with the words facing up.

Product List (Included Components):

Figure: Included components for the Motorcycle DVR system.

• One Host (Main Screen)
• Wire Harness Accessory Bag: GPS drive-by-wire (1 piece), pressure drop line (1 piece), connecting cable (2 pieces).
• Camera Accessory Bag: Camera (2 pieces), 3M double-sided tape (2 pieces), M4 self-tapping screws (4 pieces).
• Mounting Bracket: Crossbar bracket (1 piece), mirror bracket (1 piece).
• Optional: Tire Pressure Module Accessory Bag (2 pressure modules, 2 anti-theft nuts, 1 wrench).

3. Setup and Installation

The installation diagram is for reference only. There are three suitable positions to choose from: crossbar, handlebar, and rearview mirror. Always ensure the vehicle's power is off before starting installation.

Mounting the Main Unit:

Figure: BMW Motorcycle Installation Steps.

1. Ensure you have the original BMW navigation stand.
2. Install the provided BMW stand onto the motorcycle Carplay screen.
3. Install the original BMW navigation together with the Carplay screen.
4. The installation is complete and ready to use.

Wiring Diagram:

Figure: Wiring connections for the host, cameras, and power.

• Power Cable Interface: Connect the 2m power cord.
• ACC Connection: Connect to the original car ACC control wire.
• GND Connection: Connect to the negative electrode of the battery.
• Front View Interface: Connect the front camera.
• Rear View Interface: Connect the rear camera.
• Tire Pressure Module (optional): External Tire Pressure Module, wireless connection via Bluetooth.

Video: Installation and Features Overview

Video: Demonstrates unboxing, installation steps, and user interface navigation of the Motorcycle DVR.

4. Operating Instructions

Introduction of Buttons and Main Screen:

The main screen displays various icons for different functions. Navigate by tapping the corresponding icons.

Figure: Main User Interface and Function Icons.

• Menu: Access main menu.
• CarPlay: Wireless CarPlay function.
• DVR: Digital Video Recorder (camera functions).
• Auto: Android Auto function.
• TF: TF card access.
• Setup: System settings.
• Apps: Access installed applications.
• BT: Bluetooth settings.
• BT Ear: Bluetooth earphone connection.
• PhoneLink: Mirror Link function.
• Clock: Time settings.
• TPMS: Tire Pressure Monitoring System (if optional module is installed).

Bluetooth Connection:

Tap the Bluetooth icon to enter the Bluetooth interface. After connecting your phone via Bluetooth, you can perform functions like music playback.

Pairing Devices:

1. On your phone, go to Settings > Bluetooth > Search for Device.
2. Find the device name "TF801BT_xxx" (where xxx is a unique identifier) and connect.
3. Your phone may prompt for a PIN code (usually 0000 or found in settings). Enter or confirm.
4. A "Phone Device Name" message will indicate successful connection.

Wireless CarPlay / Android Auto:

The device supports wireless CarPlay for iPhones and wireless Android Auto for Android phones. This allows you to use mobile app functions, make/answer calls, and support voice control commands.

Figure: Wireless CarPlay and Android Auto Connectivity.

Connection Steps:

1. Open the device's WiFi and Bluetooth. For the first connection, manually connect your phone to the device's Bluetooth.
2. For Android Auto, ensure your phone supports Google services and has essential software installed from the Google Play Store.
3. After successful Bluetooth pairing, confirm to use CarPlay or Android Auto on your phone. CarPlay will connect automatically for iPhone after initial pairing. Android phones may require a tap on the screen to confirm.
4. Keep your phone's Bluetooth and WiFi on for stable connection.

Helmet Connection Method (Dual Bluetooth):

Figure: Dual Bluetooth for Phone and Helmet.

1. Connect your phone to the Carplay/Android Auto unit via Bluetooth.
2. After successful connection, use your phone's Bluetooth to connect to your helmet's Bluetooth.

Recording (DVR) Functions:

Tap the DVR icon to enter the recorder interface. Here you can perform various recording-related functions.

Figure: DVR Interface Functions.

• Snap: Take a snapshot.
• Recording: Start/stop recording.
• Lock: Lock the current recording file to prevent overwriting.
• MIC: Microphone control.
• F/R: Switch between front and rear camera views.
• Playback: View recorded videos and photos.
• Cycle time: Set loop recording duration.
• Setup: Access DVR-specific settings.

System Settings:

Tap the Setup icon to enter the system settings page.

• Loop Recording: Select a time period (1 min, 2 min, 3 min) for loop recording.
• Tire Pressure: Enable/disable tire pressure detection (if optional module is installed).
• Car OSD (License Plate): Set the license plate to be displayed in the video watermark.
• Screen Saver: Select the time after which the screen will turn off automatically (Off, 1 min, 3 min, 5 min).
• Channel Setup: Set up camera mirror or flip options for front and back cameras.
• Language: Choose from 19 languages including English, Chinese, Japanese, etc.
• Time Setting: Adjust year, month, day, hour, minute, second.
• Date Format: Set 12-hour or 24-hour format.
• Formatted Memory Card: Format the TF card.
• Restore Factory: Reset all settings to their initial state.
• Version: View the current software version information.

5. Maintenance

Tire Pressure Detection Function (Optional):

This function requires an external tire pressure sensor installed on the outside of the tire.

Tire Pressure Sensor Installation:

Figure: External Tire Pressure Sensor Installation.

1. Screw the anti-theft hexagonal nut onto the valve thread of the car tire.
2. Tighten the sensor clockwise onto the valve thread.
3. Use a fixture to tighten the anti-theft hexagonal nut counterclockwise and attach it to the sensor to lock the anti-theft device.

Important: After installation, use soapy water to check for air leaks!

Tire Pressure Matching:

Screw the external tire pressure sensor onto the front tire nozzle. The tire should be in a deflated state (you will hear a leak sound). Click the motorcycle front wheel matching button on the tire pressure interface (initially displayed as "unpaired") to display data. After turning on the sensor and ensuring no leak sound is heard, use soap and water to test for air leakage. Repeat for the rear wheel.

Tire Pressure Setting:

Refer to the tire pressure values provided by your vehicle manufacturer and set an appropriate range of values in the device settings.

6. Troubleshooting

• Device cannot be turned on after ACC power is on: Check if the line connection is normal.
• Front or rear camera does not display: Check the camera. If the front camera doesn't display, try swapping it with the rear camera. If the issue persists with the same camera, replace it.
• Both front and rear cameras are not displayed: Check if the camera cable connection is normal.
• Recording is not clear: Check the lens for dust and clean it.
• Bluetooth cannot connect: Verify the Bluetooth password is correct when pairing the host and phone.
• Bluetooth earphones cannot be connected: Check compatibility between the host and earphones. If the host cannot find the earphones or there's incompatibility, try connecting multiple times or replace the earphones.
• Unable to replay recorded videos or photos in the app: Check if the TF-SD card is damaged.
• Electromagnetic interference (stripes on screen/recorded video): Check camera wiring and bundling. Wiring should be smooth, non-foldable, with margin. Bundling should not be too tight, and the car shell should not be squeezed tightly.

7. Specifications

Key Features:

Figure: Summary of Key Product Features.

• IP67 Waterproof: The screen's waterproof level reaches IP67, allowing it to be submerged in 1 meter of water for 30 minutes without affecting performance.
• Anti-Glare HD Screen: Specially equipped with an anti-glare vehicle gauge screen, visible in any light, with a peak brightness of 800 nits.
• Super Night Vision: Provides clear and detailed video images with no distortion and high color reproduction.
• Dual Recording: Supports simultaneous front and rear camera recording.
• Anti-Thief Function: Requires a password to start the touch screen.
• Safety Lock Design: Stable docking and transmission with improved waterproof performance.

8. Warranty and Support

For any questions or issues during use, please feel free to contact us directly.

E-mail: jenny@jansite.cn

9. User Tips

• Motorcycle DVR vs. Motorcycle Radio: The 'Motorcycle DVR' model includes front and rear lenses with recording functionality. The 'Motorcycle Radio' model does not include cameras or recording. Ensure you have the correct model for your needs.
• Wireless Connection: For CarPlay or Android Auto, first pair your phone with the host screen via Bluetooth. Then, confirm the connection on your phone. iPhones will automatically connect to CarPlay after the initial pairing. Android phones may require a tap on the screen to confirm Android Auto. Keep your phone's Bluetooth and Wi-Fi active.
• Waterproof Effect: The product has an IP67 waterproof rating, allowing normal operation in rain or during car cleaning.
• No APK Downloads: This monitor does not run on an Android system and does not support APK downloads. Wi-Fi is used solely for CarPlay/Android Auto connections and data transfer with your phone, ensuring a stable and automatic connection.
• No Built-in Power Module: The device lacks a built-in power module. If reset, the date and time will not be retained, but Bluetooth settings will. Time will synchronize automatically from your iPhone once CarPlay is connected.