DemonFX SIMPLE

Contents

Demonfx SIMPLE Guitar DI Box Effect Pedal User Manual

1. Product Overview

The Demonfx SIMPLE is a versatile effect pedal designed for electric guitar, bass, and other musical instruments. It functions as a DI box, preamp simulator, power amp simplifier, and stereo cabinet simulator, offering a comprehensive solution for tone shaping and direct recording. This pedal is based on the DSM&HUMBOLDT SIMPLIFIER, providing a wide array of classic amplifier and cabinet emulations.

Demonfx SIMPLE Guitar Pedal Front View
Front view of the Demonfx SIMPLE pedal, showing all controls and input/output jacks.

2. Safety & Warnings

  • Choking/Electric Hazard: Keep the device and cables out of reach of children under 3 years old to avoid risk of choking or electric hazard.
  • Power Supply: Use only a standard 9V DC power supply with center negative polarity, as marked on the pedal. Do not use incompatible power adapters to avoid damaging the unit. Do not reverse polarity.
  • Modifications: Do not disassemble, modify the internal circuit, or expose the pedal to excessive moisture, dust, high temperature, or direct sunlight.
Demonfx SIMPLE Pedal Power Input with Polarity Diagram
Close-up of the power input jack, illustrating the required 9V DC center-negative polarity.

3. Setup

3.1 Power Supply

Connect a standard 9V DC power adapter (not included) to the 9VDC power jack on the side of the pedal. Ensure the adapter has a center negative polarity. Using an incorrect power supply can damage the unit and void the warranty.

3.2 Connections

The Demonfx SIMPLE offers a variety of input and output options for flexible integration into your setup. Refer to the diagram below for jack locations.

Demonfx SIMPLE Pedal Top View with Labeled Controls and Jacks
Top view of the pedal, highlighting the various controls and connection points.
  • INPUT: Connect your guitar or other instrument here using a standard 6.35mm (1/4-inch) instrument cable.
  • SEND: This FX send output is positioned after the preamp and power amp stages, ideal for connecting modulation and ambience effects.
  • RETURN R (MONO): Connect the right (or mono) output from your stereo effects unit here.
  • RETURN L: Connect the left output from your stereo effects unit here. If this input is left unconnected, the left side will receive the signal from the FX Return Right (mono) side.
  • FX/THRU OUT R (MONO): If the adjacent toggle switch is set to "FX", this carries the right side output. If set to "SUM MONO", this output will sum both left and right signals.
  • FX/THRU OUT L: If the adjacent toggle switch is set to "FX", this carries the left side output. If set to "THRU", this output provides the input signal (bypass).
  • XLR OUT R: Provides a balanced right-side output, suitable for connecting to mixing consoles or audio interfaces.
  • XLR OUT L: Provides a balanced left-side output, suitable for connecting to mixing consoles or audio interfaces.
  • AUX IN: Connect an external audio device such as an MP3 player or phone here to play along with backing tracks.
  • PHONES LEVEL: Adjusts the volume for the headphone output.
  • HEADPHONE: Connect your headphones here for silent practice or monitoring.

4. Operating Instructions

The Demonfx SIMPLE pedal offers extensive control over your guitar tone. Familiarize yourself with the various knobs and switches to sculpt your desired sound.

4.1 Preamp Section

The preamp section features a 100% true analog design, meticulously recreating classic clean channel preamps.

  • STYLE Switch: This 3-way toggle switch selects between three classic amp voicings:
    • AC BRIT: Emulates the sparkly, tridimensional sound of a classic AC30.
    • AMERICAN: Provides the sweet and dynamic response of a blackface deluxe amp.
    • MS BRIT: Delivers the clean-to-crunch tones of a vintage plexi-style amp, defining rock music.
  • GAIN: Adjusts the input gain of the selected amp model, controlling the amount of overdrive.
  • VOLUME: Sets the master output volume level of the preamp section.
  • Tone Stack (TREBLE, MID, BASS): A genuine configurable three-band EQ that mimics the behavior of classic tube amp tone stacks.
    • TREBLE: Controls the high-frequency band.
    • MID: Controls the mid-frequency band.
    • BASS: Controls the low-frequency band.

4.2 Power Amp Simulation

This stage accurately approximates the interaction between power tubes, output transformer, and global feedback, producing distinct frequency responses.

  • PRESENCE: Controls the hi-mids response, similar to the feedback-based presence control on tube amps. Turn it up to cut through the mix or down to soften aggressive distortions.
  • RESONANCE: Controls the low-end and resonance peak caused by transformer-speaker interaction. This allows you to adjust the dampening factor for tight low-end clarity.
  • POWER TUBES SECTION Switch: A 3-way toggle switch that mimics the response of classic tube types:
    • EL34: Offers a complex mid response with a compressed feel.
    • 6L6: Provides a more open and dynamic response with deeper bass and sparkling highs.
    • KT88: Similar to 6L6 but with an improved low-end range, ideal for bass or 7+ string guitars.

4.3 Stereo Cabsim

The tweakable cabinet simulator leverages DSM Noisemaker's expertise to provide useful and innovative cabsims.

  • MIC POSITION Controls (LEFT / RIGHT): These controls allow you to dial in two independent cabinet simulators, panned left and right. They simulate a real CENTER/OFF AXIS microphone position, adjusting the precise amount of high-end roll-off.
  • Cabinet STYLE Toggle Switches: Independent 3-way toggle switches for each side (LEFT and RIGHT) allow you to choose different cabinet styles:
    • 1x12 Combo
    • 2x12
    • 4x12
    You can combine these with any of the three preamp voicings for enhanced sound development.

4.4 Spread Control

This unique feature creates a pseudo stereo imaging by shifting the phase of one channel on selected key frequencies. It makes your sound bigger and more three-dimensional, even in a mono configuration. The Spread control is useful for achieving a "dual Cab" sound with realistic physical separation, perfect for stereo recording or headphone use.

5. Maintenance

  • Cleaning: Keep the pedal dry and clean. Use a soft, dry cloth to wipe the surface. Avoid using abrasive cleaners or solvents.
  • Storage: Disconnect power and all cables when the pedal is not in use for an extended period. Store in a cool, dry place away from direct sunlight and extreme temperatures.

6. Specifications

FeatureSpecification
Product NameSIMPLE
TypeEffect Pedal
MaterialAluminum alloy
Power Supply9V DC (center negative), 100 mA minimum (9V ~ 15V compatible)
Interface6.35mm (1/4-inch) audio jacks, XLR outputs
ApplicationElectric guitar, bass, and other musical instrument signal lines
Headphone Power120mW @ 32 Ohm
Input Impedance500K ohm
Output Impedance10K ohm
Weight460g
Dimensions (L x W x H)Approx. 13cm x 9cm x 8cm (5.1in x 3.5in x 3.1in)

7. Troubleshooting

  • Excessive Noise/Hum:
    • Ensure you are using a regulated 9V DC center-negative power supply. Unregulated power supplies can introduce noise.
    • Check all cable connections for tightness and integrity. Faulty cables can cause hum.
    • Ensure proper grounding in your signal chain.
  • Volume Issues (e.g., always full volume, unresponsive):
    • Verify the "Volume" knob on the pedal is functioning correctly and not stuck.
    • Check the output levels of any preceding pedals or the input sensitivity of your amplifier/interface.
    • Ensure no external devices are overriding the pedal's output level.
  • Unwanted Distortion/Sound Artifacts:
    • Review the "Gain" settings on the pedal. High gain settings can lead to unwanted distortion if not managed properly.
    • Check the output levels of any pedals connected before the SIMPLE pedal to avoid overdriving its input.
    • Ensure correct impedance matching if connecting to other equipment.

8. User Tips

  • Solid Construction: Users appreciate the pedal's robust aluminum alloy construction, noting its solid feel and durability.
  • Versatile Tone: The pedal offers a wide range of adjustments, delivering a powerful and defined sound with good dynamics and clarity across various settings. Experiment with the preamp styles, power tube types, and cabsim options to find your unique tone.
  • Ampless Solution: This pedal is an excellent choice for musicians looking to go "ampless," providing comprehensive amplifier and cabinet simulations directly to a PA system, audio interface, or headphones.
  • Ease of Adjustment: Despite its many features, the pedal is generally considered easy to adjust and highly responsive to control changes.

9. Disclaimer

  • This product is intended for musical instrument signal processing only.
  • The manufacturer shall not be liable for damage caused by improper power use, modification, or incorrect operation of the device.

10. Support

For further assistance, technical support, or detailed information, please refer to the official product page or contact the manufacturer directly. A comprehensive PDF user manual is also available for download: Demonfx SIMPLE User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.