Introduction
This manual provides detailed instructions for the operation and maintenance of your Satlink WS-6908 Digital Satellite Finder Meter. The WS-6908 is a high-performance device designed for quick and accurate alignment of satellite dishes, featuring a 3.5-inch LCD color display and a microprocessor controller for stable performance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Key Features
- High quality and stable performance with a microprocessor controller.
- 3.5-inch LCD color display for clear viewing of menus and signal information.
- Displays channel picture, signal strength, and signal quality after DVB-S parameter setup.
- Automatic protection against LNB short-circuits.
- Provides Azimuth and Elevation readings, CBER/VBER, S/N ratio, signal strength, and an audible signal lock alarm.
- Supports both AV IN and AV OUT for connecting external devices like cameras or larger LCD screens.
- Equipped with a built-in 3000mAH Li-ion battery for extended use.
- Includes a protective bag for convenient outdoor portability.
- Multi-language support: English, German, French, Portuguese, Spanish, Italian, Dutch, Polish, Turkish.
Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Satlink WS-6908 Satellite Finder Meter
- 1 x Black Protective Bag
- 1 x Car Charger
- 1 x Power Adapter
- 1 x AV Cable
- 1 x CD (containing user manual and software)
Figure 1: Package Contents Overview
Product Overview and Initial Setup
Component Identification
Familiarize yourself with the various parts of your WS-6908 device:
Figure 2: Front Panel and Side Connections
- Power Switch: Turns the device on/off.
- LNB Input: F-type connector for satellite dish LNB cable.
- Screen: 3.5-inch LCD display for menu navigation and signal information.
- Indicator Lights: LEDs for Power, 22K, 13V/18V, Lock, and Charge status.
- AV OUT: Audio/Video output jacks for connecting to an external display.
- AV IN: Audio/Video input jacks for connecting external video sources (e.g., CCTV camera).
- Key Buttons: Numeric keypad, MENU, OK, F1-F4, EXIT, BLIGHT, MUTE, TV/R, INFO, SCAN, +/- buttons for navigation and function control.
Battery Installation and Charging
The device comes with a rechargeable Li-ion battery. Before first use, ensure the battery is properly installed and fully charged.
Figure 3: Battery Compartment and Installation
- Open the battery compartment cover on the back of the device.
- Connect the Li-ion battery to the designated connector inside the compartment.
- Place the battery into the compartment and close the cover securely.
- Connect the provided power adapter to the DC 12V input port on the device and plug it into a wall outlet. The "Charge" indicator light will illuminate.
- Allow the device to charge until the "Charge" indicator light changes or turns off, indicating a full charge.
- Alternatively, use the car charger to charge the device in a vehicle.
Operating Instructions
1. Powering On/Off
- To power on, slide the Power switch to the 'ON' position.
- To power off, slide the Power switch to the 'OFF' position.
2. Satellite Dish Alignment
- Connect LNB: Connect the cable from your satellite dish's LNB to the "LNB IN" F-type connector on the WS-6908.
- Select Satellite: From the main menu, navigate to "Satellite Install" or "Quick Search" using the arrow keys and press "OK".
- Configure Parameters: Select the desired satellite from the list. If necessary, adjust parameters such as LNB type, LO frequency, Transponder frequency, Symbol Rate, and Polarization (13V/18V). The device supports 22KHz tone and DiSEqC 1.0/1.1/1.2.
- Adjust Dish Position: Slowly adjust the azimuth and elevation of your satellite dish. Observe the signal strength and quality bars on the LCD screen.
- Achieve Signal Lock: When a strong signal is detected, the "Lock" indicator LED will light up, and an audible alarm will sound. Fine-tune the dish position for maximum signal strength and quality.
- Verify Channel: Once locked, you can view the channel picture (if available) and check CBER/VBER and S/N values for optimal performance.
- Save Settings: Follow on-screen prompts to save the satellite settings if desired.
3. AV Input/Output Functionality
- AV OUT: Connect the AV cable from the "AV OUT" jacks on the WS-6908 to the AV input of an external monitor or TV to display the device's screen on a larger display.
- AV IN: Connect an external video source (e.g., a CCTV camera) to the "AV IN" jacks. Select the AV IN mode from the device's menu to view the external video feed on the WS-6908's screen.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for a long period, charge the battery to about 50% and recharge every few months.
- Protective Bag: Always use the provided protective bag when transporting the device to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is discharged or not properly connected. | Charge the battery using the power adapter. Ensure the battery is correctly installed. |
| No signal detected. | LNB cable not connected, incorrect satellite parameters, dish misalignment, or LNB fault. | Check LNB cable connection. Verify satellite parameters. Adjust dish azimuth and elevation. Check LNB for damage. |
| "LNB Short" error message. | Short circuit in the LNB cable or LNB itself. | Disconnect the LNB cable and check for any damage or exposed wires. Test with a different LNB or cable if possible. |
| Poor signal quality despite high strength. | Interference, slight misalignment, or LNB noise. | Fine-tune dish alignment. Check for obstructions. Consider replacing LNB if problem persists. |
User Tips
- Pre-configure: Before going on-site, pre-configure known satellite parameters to save time during installation.
- Start Broad: When searching for a satellite, make broad adjustments to the dish, then fine-tune once a signal is detected.
- Use Audio Alarm: The audible signal lock alarm is very useful for fine-tuning without constantly looking at the screen.
- External Display: For prolonged setup or group viewing, utilize the AV OUT feature to connect to a larger screen.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates that might improve performance or add features.
Specifications
Figure 4: Technical Specifications Table
| Category | Parameter | Value |
|---|---|---|
| LNB Input | Connector | F type, male |
| Frequency range | 950MHz-2150MHz | |
| Signal level | -65dBm ~ -25dBm | |
| LNB Supply | 13/18V, IMax 400mA | |
| LNB switch control | 22KHz | |
| Demodulator | DiSEqC | Ver 1.0/1.1/1.2 |
| Demodulation | QPSK | |
| Symbol Rate | 2Mbps ~ 45Mbps | |
| SCPC and MCPC Capable | Yes | |
| System Resource | Processor | 32bit processor (133MHz) |
| FLASH | 8Mbit | |
| SDRAM | 4*16Mbit | |
| Data Rate | Max 15M bps | |
| Video Decoder | Resolution | 720*576, 720*480 |
| Video format | PAL/NTSC/SECAM | |
| Type | Mono | |
| Audio | Sampling rates | 32, 44.1 & 48KHz |
| Type | Mono | |
| Data Transfer | Connector | USB |
| Li-Ion Battery | 8.4V/3000mAh | |
| Power Supply | IN | AC 90-250V |
| OUT | DC 12V/1.5A | |
| Physical Specification | Size | 95x155x45(mm) |
| Net Weight | 0.5KG |
Warranty and Support
The Satlink WS-6908 Digital Satellite Finder Meter is designed for reliability and performance. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support, consult the included CD for additional resources or visit the manufacturer's official website.
