veromount ES-D ES-DP ES-D(WT) ES-DP(WT)

Veromount Skydance SPI Stair Light Controller User Manual

Models: ES-D, ES-DP, ES-D(WT), ES-DP(WT)

DC5V-24V Dual PIR Sensor Dual Push Button SPI Stair Light Controller for Pixel RGB / White LED Strip

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Veromount Skydance SPI Stair Light Controller. This series includes models ES-D, ES-DP, ES-D(WT), and ES-DP(WT), designed to control pixel RGB or white LED strips for stair lighting applications. These controllers offer features such as PIR sensor detection, dual push-button control, and optional RF/WiFi connectivity for smart home integration.

Overview of Veromount Skydance SPI Stair Light Controller models
Figure 1: Overview of Veromount Skydance SPI Stair Light Controller models (ES-D, ES-DP, ES-D(WT), ES-DP(WT)) and smart home compatibility.

2. Safety Information

  • Ensure the input voltage (DC5V-24V) matches the power supply and LED strip requirements.
  • Do not exceed the maximum load power of 960 pixels.
  • Installation should be performed by a qualified professional if you are unsure about electrical wiring.
  • Avoid installing the PIR sensor in direct sunlight or near heat sources to prevent interference.
  • Ensure all connections are secure to prevent short circuits.
  • Operate within the specified temperature range (-30°C to +55°C).

3. Package Contents

The standard package includes:

  • 1x LED Controller (ES-D, ES-DP, ES-D(WT), or ES-DP(WT) as selected)
  • 1x User Manual
  • 1x Daylight Sensor (30cm) (Included with ES-D and ES-D(WT) models only)
  • 2x PIR Sensors (Included with ES-D and ES-D(WT) models only)
  • 2x PIR Sensor Extension Lines (5m) (Included with ES-D and ES-D(WT) models only)
Package contents for ES-D controller
Figure 2: Example package contents for ES-D controller, including PIR sensors and daylight sensor.

4. Specifications

Parameter Value
Brand Name veromount
Model Numbers Skydance ES-D, ES-D(WT), ES-DP, ES-DP(WT)
Input Voltage DC5V-24V
Input Current 1.5A
Output Signal 2 x SPI (TTL)
Max. Load Power (Pixel Number) MAX 960 Pixel
Input Signal (ES-D, ES-D(WT)) PIR sensor + Push button
Input Signal (ES-DP, ES-DP(WT)) Push button
Input Signal (WT models) WiFi / RF 2.4GHz
Connection Mode WIFI (for WT models)
Controled Method RF or WIFI Tuya smart APP cloud control.
Applicable Lights WS2811, WS2812 Pixel or White Light Strip
Remote Distance 20M (RF)
Material ABS
Power Source DC
Operation Temperature -30°C to +55°C
Case Temperature (Max.) +65°C
IP Rating IP20
Package Size L175 x W54 x H27mm
Gross Weight 0.127kg
Warranty 5 years

5. Setup and Installation

5.1 General Wiring Diagram

Ensure power is disconnected before wiring. Connect the constant voltage DC5V-24V power supply to the controller's power input terminals (V+ and V-). Connect the SPI signal output (DATA1, CLK1, DATA2, CLK2, etc.) to your pixel RGB or white LED strip. For models with PIR sensors, connect the UP PIR sensor, DW PIR sensor, and Daylight sensor to their respective input terminals.

Mechanical Structures and Wiring Diagram for ES-D controller
Figure 3: Mechanical Structures and Basic Wiring Diagram for ES-D controller.

5.2 PIR Sensor Installation (ES-D, ES-D(WT) models only)

The PIR sensors detect motion to trigger the stair lights. For optimal performance, follow these guidelines:

  • Recommended Installation: Wall mounting.
  • Height: 1-1.5 meters from the ground.
  • Detection Scope: Approximately 1.2-1.5 meters in diameter, with a sensitivity angle of 30° (±10°).
  • Environment: Install in a dry environment. Avoid direct sunlight, heat sources (e.g., stoves, air conditioners), and areas with strong electromagnetic interference, as these can introduce false triggers.
PIR Sensor Active LED Light to Turn On
Figure 4: PIR sensor detection principle and recommended installation height.

5.3 Wiring for Color or White Light Step Mode

Connect the UP push switch, DW push switch, UP PIR sensor, DW PIR sensor, and Daylight sensor (if applicable) to the controller. The controller's SPI signal output connects to the RGB or white LED pixel strip. Ensure the power supply is correctly connected.

Wiring diagram for Color or White Light Step Mode with PIR sensors and push buttons
Figure 5: Detailed wiring for Color or White Light Step Mode.

5.4 Connecting Multiple Controllers for Sequential Switching

For larger stair installations requiring more than one controller, multiple units can be connected to a single self-resetting push switch for sequential control. Each controller will manage its own segment of the LED strip.

Wiring diagram for multiple SPI controllers with a single push switch
Figure 6: Wiring for multiple SPI controllers controlled by a single push switch.

5.5 System Wiring for WiFi Models (ES-D(WT), ES-DP(WT) only)

For WiFi-enabled models, the controller can be connected to your home WiFi network via the Tuya Smart APP for cloud control. Ensure a stable 2.4GHz WiFi signal where the controller is installed.

System wiring diagram for ES-D(WT) WiFi controller
Figure 7: System wiring for WiFi models, showing mobile app, router, and Tuya Cloud connection.

6. Operating Instructions

The controller features a digital display and two buttons (M and ►) for parameter setting and operation.

6.1 Basic Button Functions

  • Short press M key: Enter setting interface or switch between parameters.
  • Short press ► key: Switch light modes, adjust values, or confirm selection.
  • Long press M and ► keys (2s): Enter parameter setting state or restore factory defaults.

6.2 Parameter Setting

Long press the M and ► keys simultaneously for 2 seconds to enter the parameter setting state. The digital display will show the current setting. Short press M to cycle through settings, and short press ► to change values.

  1. Light Type Setting:

    • L1 (3-bead white light): 1 pixel with 3 data, controls 3-bead white LED.
    • L2 (1-bead white light): 1 pixel with 1 data, controls 1-bead white LED.
    • L3 (RGB color light): 1 pixel with 3 data, controls one R/G/B LED.

  2. LED Strip Connection Mode Setting:

    • P01 (Flow mode): Straight line digital pixel LED strip connection.
    • P02 (Step mode): Z-shape digital pixel LED strip connection.

  3. Pixel Length Setting: Adjust the total number of pixels in your LED strip. Range: 032-960.

  4. Step Number and Step Pixel Length Setting:

    • Step numbers: Range 8-99.
    • Pixel dot number of each step: Range 2-99.

  5. Light On/Off Mode Setting:

    • onS: Sequential light on.
    • onF: Sequential light on, reverse.
    • onC: Synchronized light on.
    • ofS: Sequential light off.
    • ofF: Sequential light off, reverse.
    • ofC: Synchronized light off.

    Combinations like onS+ofS, onS+ofF, onC+ofC are available.

  6. Sensor Delay Off Time Setting (ES-D, ES-D(WT) only): Set the delay time before lights turn off after no motion is detected. 10 levels from 5 seconds to 60 minutes, or '000' to cancel.

  7. Daylight Detection Setting (ES-D, ES-D(WT) only): Adjust the ambient light threshold for the daylight sensor. 6 levels from 10 lux to 200 lux, or 'Off'.

  8. Light Effect Parameter Setting (Speed, Brightness, Self-defined R/G/B color): (For ES-DP, ES-DP(WT) models, and also available via APP for WT models)

    • Speed: 1-8 levels adjustable.
    • Brightness: 1-10 levels adjustable.
    • Self-defined R/G/B color: 0-255 for each channel.
Parameter setting interface for ES-D controller
Figure 8: Parameter setting interface and options for ES-D controller.

6.3 RF Remote Control (Optional)

To match an RF remote control, long press the M and ► keys simultaneously for 2 seconds until the display shows 'RES'. Then follow the remote control's pairing instructions.

6.4 Tuya Smart APP Network Connection (ES-D(WT), ES-DP(WT) models only)

For WiFi models, you can connect the controller to the Tuya Smart APP for advanced control and customization:

  1. Download and install the Tuya Smart APP on your mobile device.
  2. Ensure your phone is connected to a 2.4GHz WiFi network.
  3. Long press the M and ► keys on the controller for 2 seconds to enter smart config mode. The digital tube will flash.
  4. Follow the instructions in the Tuya Smart APP to add the device.
  5. Once connected, you can control light type, strip length, chip type, color sequence, color, brightness, and access dynamic scenarios and music rhythms via the app.
Tuya Smart APP interface for ES-D(WT) controller
Figure 9: Examples of Tuya Smart APP interfaces for controlling the stair light controller.

7. Maintenance

  • Keep the controller and sensors clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Regularly check wiring connections for any signs of wear or looseness.
  • For WiFi models, ensure your router firmware is up to date for optimal performance.

8. Troubleshooting

  • Lights not turning on: Check power supply connection, LED strip connection, and ensure the correct light type and pixel length are set in the parameters. Verify PIR sensors (if applicable) are not obstructed.
  • Inconsistent light behavior: Check for loose wiring. Ensure the correct IC type is selected for your LED strip. For WiFi models, check WiFi signal strength and network connection.
  • PIR sensor false triggers: Re-evaluate PIR sensor placement. Ensure it's not near heat sources, direct sunlight, or areas with high air movement. Adjust daylight detection sensitivity if needed.
  • Controller unresponsive: Try resetting the controller to factory defaults by long pressing M and ► keys for 2 seconds.
  • WiFi connection issues: Ensure your WiFi network is 2.4GHz. Check the distance between the controller and your router. Verify WiFi signal strength in the installation area.

9. User Tips

  • LED Strip Compatibility: This controller is designed for pixel LED strips (e.g., WS2811, WS2812) which typically have at least three wires (V+, Data, GND). It is not compatible with simple 2-wire LED strips that do not have data input capabilities. Always verify your LED strip type before connecting.
  • Testing: Before final installation, it's recommended to test all connections and settings with a short length of LED strip to ensure proper functionality.
  • Customization: For WiFi models, explore the Tuya Smart APP's advanced features for custom dynamic scenarios and music rhythm modes to personalize your stair lighting experience.

10. Warranty and Support

This product comes with a 5-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Please provide your model number and purchase details when seeking support.

11. Certifications

This product complies with the following certifications:

  • CCC
  • CE
  • ROHS

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.