ETENWOLF Air 3

Contents

ETENWOLF Air 3 Electric Air Pump User Manual

Read all instructions and safety warnings before use.

Introduction

Thank you for purchasing the ETENWOLF Air 3 Electric Air Pump. This portable and versatile pump is designed for inflating and deflating various items such as air mattresses, sleeping pads, pool floats, and vacuum storage bags. It also features an integrated camping light for added utility.

For detailed information, you may also refer to the official user manual PDF: ETENWOLF Air 3 User Manual (PDF)

Product Overview

The ETENWOLF Air 3 is a compact and powerful device. Familiarize yourself with its components:

Diagram of ETENWOLF Air 3 pump with numbered parts: 1. Hanging ring, 2. Deflation port, 3. Start/pause power button, 4. Battery indicator, 5. Light button, 6. Type-C Charging port, 7. Camping light, 8. Inflation port.
  1. Hanging ring
  2. Deflation port
  3. Start/pause power button
  4. Battery indicator
  5. Light button
  6. Type-C Charging port
  7. Camping light
  8. Inflation port

The pump comes with 5 different nozzles to accommodate various inflatables:

Image showing the ETENWOLF Air 3 pump and five different nozzles for various inflatables.
  • Nozzle for Air Mattress/Floating bed/Air pillow (Dimensions: 16mm, 19.8mm, 20.6mm, 22.2mm, 27.9mm)
  • Nozzle for Vacuum storage bag (Dimensions: 30.1mm, 27.9mm)
  • Nozzle for Swimming ring/Inflatable toy (Dimensions: 5.9mm, 53.3mm)
  • Nozzle for Camping sleeping pad (Dimensions: 26.3mm)

Setup and Initial Use

Charging the Device

Before first use, ensure the pump is fully charged. Use a certified charger that provides 5V/3A. The battery indicator will show the charging status:

  • 0-10% orange flashing
  • 10%-30% orange
  • 30%-100% white
  • While Charging: 0-99% white flashing, 100% full charged white.

Charging time is approximately 1.5 hours (with a 5V/2A charger).

Steps to Inflate

  1. Attach the Nozzle: Select the appropriate nozzle for your inflatable item. Attach it clockwise onto the inflation port (8).
    Hand attaching a nozzle clockwise onto the inflation port of the pump.
  2. Activate the Pump: Long-press the Start/pause power button (3) for 2 seconds to activate the pump.
    Hand long-pressing the start/pause power button on the pump.
  3. Start Inflation: Connect the nozzle to the object to be inflated and press the Start/pause power button (3) to begin inflation.
    Pump connected to an inflatable object, with a hand pressing the start/pause power button to begin inflation.
  4. Stop Inflation: Press the Start/pause power button (3) again to stop inflation.
    Hand pressing the start/pause power button to stop inflation.

Operating Instructions

Inflation and Deflation

To turn on the device, long-press the power button for 2 seconds. Once on, you can control the speed and stop the operation:

  • High Speed: Press the power button once to initiate high-speed operation.
  • Low Speed: Within the first 5 seconds of high-speed operation, press the power button a second time to switch to low-speed.
  • Stop Operation: Press the power button a third time to stop the operation. If the high-speed fan has been operating for more than 5 seconds, pressing the power button will stop the operation immediately.

Note: The air pump requires manual stopping; it will not stop automatically. Always check the allowable pressure of the item before use to prevent overinflation and potential damage.

Deflation: To deflate an item, attach the appropriate nozzle clockwise onto the deflation port (2). Then follow the same steps as inflation to activate and operate the pump for deflation.

Performance:

  • High speed flow: 13 CFM (Cubic Feet Per Minute) / 360 LM (Liters per Minute)
  • Low speed flow: 8 CFM (Cubic Feet Per Minute) / 225 LM (Liters per Minute)

Camping Light Function

The Air 3 pump includes a camping light feature:

  • Press the light button (5) to turn on the light when the pump is activated.
  • Level 1: 60 lumens, providing light for up to 40 hours (under full charge).
  • Level 2: 200 lumens, providing light for up to 10 hours (under full charge).
  • Level 3: 600 lumens, providing light for up to 3 hours (under full charge).
  • The light also features a Strobe light and SOS signal function.

To turn off the light in any active light mode, long-press the light button (5) for 2 seconds.

Video: Product demonstration showing inflation, vacuuming, and light functions.

Maintenance

  • To maintain optimal battery performance, please charge the device once every six months, even if not in regular use.
  • Always use a certified 5V/3A charger for charging.

Troubleshooting

  • Red Flashing Light: A red flashing light indicates a high temperature warning or overload. In this case, check for any vent blockages and allow the device to cool down before resuming operation.
  • Unable to Charge: If the device is not charging, ensure you are using a compatible 5V/3A charger and that the Type-C charging port (6) and cable are properly connected.

Safety Instructions

Please read and adhere to the following safety warnings to reduce the risk of electric shock, fire, and/or serious injury:

  • This appliance is intended for adult use only.
  • Do not drop the unit into water or expose it to rain or water. This product is not waterproof; do not immerse it in water.
  • Do not obstruct the vent holes or any open sources on the device.
  • Do not insert objects into the inflation or deflation connectors.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.

Specifications

AttributeETENWOLF Air 3
Dimensions1.8 inches x 1.9 inches x 2.3 inches (4.8cm x 4.8cm x 6cm)
Item Weight145g
PressureHigh speed flow: 0.65 PSI / 4.5 kPa
Low speed flow: 0.5 PSI / 3.5 kPa
Inflation/Deflation SpeedHigh speed flow: 13 CFM / 360 LM
Low speed flow: 8 CFM / 225 LM
Battery Capacity2600 mAh x 3.7V (9.6Wh)
Charging TimeApproximately 1.5 hours (5V/2A)
Operating TemperatureCharging: 0°C-45°C / 30°F-113°F
Operating: -20°C-70°C / -4°F-158°F
Storage Temperature-20°C-55°C / -4°F-131°F
Brightness of Light60 lumens (40 hours)
200 lumens (10 hours)
600 lumens (3 hours)
Item TypePUMPS
Power SourceBattery Powered
High-concerned chemicalNone
OriginMainland China
Diagram showing the number of inflations the Air 3 can handle for various items: Air Pillow (10s x 100), Vacuum Bag (23s x 48), Camp Sleep Pad (30s x 45), Swimming Ring (45s x 20). Notes indicate it's powered by a 2600mAh battery and covers camping, storage, and pool needs on one charge.

User Tips

  • Manual Stop: Remember that the pump requires manual stopping. It will not turn off automatically once inflation/deflation is complete.
  • Prevent Overinflation: Always check the recommended pressure for your inflatable items to avoid overinflation, which can cause damage.
  • Battery Longevity: To ensure the longest possible lifespan for your pump's battery, charge it at least once every six months, even during periods of non-use.
  • Dual Functionality: The Air 3 is not just for inflation; it also effectively deflates items and can be used for vacuum storage bags, making it a versatile tool for camping and home organization.

Warranty and Support

2-Year Warranty Coverage

ETENWOLF provides a 2-year warranty from the date of purchase. During this period, any defective product due to manufacturing faults will be repaired or replaced. This warranty ensures timely and effective online after-sale service.

Contact Information

If you have any questions, comments, or require support, please contact us:

The product is Made in P.R.C.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.