1. Product Overview
The JONSBO D32 series offers compact and versatile mini desktop cases designed for Mini-ITX, Micro-ATX, and Micro-ATX back-insert motherboards. These cases support various cooling configurations, including 240mm water cooling, and are suitable for both standard and high-performance builds.



2. Specifications
Below are the technical specifications for the JONSBO D32 series cases.
| Feature | Specification |
|---|---|
| Dimensions (w/o feet) | 384mm (D) x 207mm (W) x 302mm (H) |
| Dimensions (with feet) | 395mm (D) x 207mm (W) x 314mm (H) |
| Motherboard Support | Mini-ITX, Micro-ATX (Standard), Micro-ATX (Back-Connect) |
| Expansion Slots | 4 |
| Case Weight (STD) | Net Weight: 4.5kg / Gross Weight: 5.5kg |
| Case Weight (STD/MESH) | Net Weight: 4.1kg / Gross Weight: 5.1kg |
| Max CPU Cooler Height | 164mm (Intel CPU) / 163mm (AMD CPU) |
| Radiator Clearance | Top, up to 240mm |
| Max GPU Length | 365mm |
| Power Supply Model | ATX, SFX/SFX-L |
| Front Ports | USB3.2 Gen1 Type-A*1, USB3.2 Gen 2 Type-C*1, AUDIO*1 & MIC*1 |
| Material | Steel |
| With Side Panel Window | Yes |
| RGB Support | Fixed Color |


3. Parts List
Before beginning installation, please ensure all parts are present.
3.1. Screws
- 20 x Motherboard / Power Supply / HDD / SFX Bracket Screws
- 7 x SSD Screws
3.2. Spare Parts
- 2 x Motherboard Standoffs
- 1 x Motherboard Post Installation Aid Sleeve
- 10 x Cable Ties
- 1 x SFX Bracket

4. Setup and Installation
4.1. Pre-Installation Preparations
- Remove the side panels and top panel of the chassis.
- Unscrew and detach any necessary brackets or covers to access the internal compartments.

4.2. Motherboard Installation
- Install the motherboard standoffs into the chassis.
- Place the motherboard into the chassis, aligning it with the standoffs.
- Secure the motherboard with the appropriate screws.
- Connect the front panel I/O connectors (USB 3.2 Gen1 Type-A, USB 3.2 Gen 2 Type-C, Headset Audio Jack) to the motherboard.

4.3. Power Supply Installation
- Install the ATX PS2 power supply into its designated position.
- If using an SFX power supply, use the provided SFX bracket for installation.
- After installing the power supply, plug in the CPU power cable first for easier management.

4.4. Water Cooling Installation
The D32 STD supports 240mm water cooling at the top. Ensure the radiator and fan thickness (including fan) does not exceed 60mm, and length is within 282mm.

4.5. 2.5-inch SSD Installation
The case supports up to three 2.5-inch SSDs. Install them in the designated mounting locations using the provided SSD screws.

4.6. 3.5-inch HDD Installation
The case supports one 3.5-inch HDD, which shares a mount with one of the 2.5-inch SSD positions. Install the HDD using the appropriate screws.
4.7. Graphics Card Installation
The D32 series cases support graphics cards up to 365mm in length. Ensure proper cable management, especially for longer GPUs.
- Remove the PCI-E slot covers.
- Insert the graphics card into the PCI-E slot on the motherboard.
- Secure the graphics card with screws.
- If the GPU is longer than 288mm, organize power cables in advance.


4.8. Finishing the Installation
- Organize all internal cables using the provided cable ties.
- Reattach the side panels and top panel, ensuring they are securely fastened.
- Tighten all screws to complete the assembly.

5. Operating Instructions
Once assembled, connect your peripherals and power cable to the rear I/O of your motherboard and power supply. The front I/O ports provide convenient access for USB devices and audio.
Front I/O Interface:
- USB3.2 Gen1 Type-A: 1 port
- USB3.2 Gen 2 Type-C: 1 port
- Headphone & Microphone composite audio port: 1 port

Press the power button located on the front panel to turn on your system.
6. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your computer case.
Dust Filter Cleaning:
The D32 series features a panel mesh design and a magnetic dustproof net at the bottom to prevent dust intrusion. Periodically remove and clean these filters to maintain good airflow and cooling efficiency.
- Gently remove the magnetic dust filter from the bottom of the case.
- Clean the dust filter using compressed air or by rinsing with water. Ensure it is completely dry before reattaching.
- For the mesh panels, use a soft brush or compressed air to remove accumulated dust.

General Care:
- Keep the case in a well-ventilated area to prevent overheating.
- Avoid placing heavy objects on top of the case.
- Clean the exterior with a soft, damp cloth. Do not use harsh chemicals.
7. Troubleshooting
Here are some common issues and their potential solutions:
7.1. Power On Issues
- No Power: Check all power connections, including the power supply unit (PSU) cable, motherboard 24-pin, and CPU power cables. Ensure the PSU switch is in the 'ON' position.
- System Fails to Boot: Verify that all components (CPU, RAM, GPU, storage) are correctly seated and connected.
7.2. Cooling Performance
- High Temperatures: Ensure all case fans are spinning and oriented correctly for optimal airflow. Clean dust filters regularly. Verify CPU cooler and GPU cooler are properly installed.
- Water Cooler Compatibility: The D32 series supports a 240mm water cooler at the top. A 280mm water cooler will not fit.
7.3. Component Clearance
- GPU Length: The case supports GPUs up to 365mm. If installing a GPU longer than 288mm, ensure power cables are managed to avoid interference.
- PSU Length: If the GPU is in the first PCI-E slot, the PSU length limit is 150mm (recommended ≤140mm). If the GPU is in the second PCI-E slot, the PSU length limit is 170mm (recommended ≤160mm). If GPU length is ≤288mm, PSU length is limited to 200mm (not compatible with 16A plugs).

8. User Tips
- Cable Management: Due to the compact nature of the D32 chassis, careful organization of cables, especially behind the motherboard tray, is crucial for good airflow and aesthetics. Consider using a 90° adapter for the 24-pin power plug if there's a conflict with the back side panel.
- Motherboard Choice: The D32 STD supports back-plug MATX motherboards, offering a clean visual experience with only 207mm width control.
- Fan Configuration: The case supports up to 6 cooling fans (top: 2x120mm/140mm, rear: 1x120mm, bottom: 3x120mm/2x140mm) to create a high-flow intake channel for efficient heat dissipation.

9. Warranty and Support
For warranty information, technical support, or further inquiries, please visit the official JONSBO website or contact their customer service. You can also refer to the comprehensive user manual available in PDF format for more detailed information:
Manufacturer: Dongguan Sibositong Industrial Co.,Ltd.
Website: www.jonsbo.com