Manuals+

GX-IR-Score04 GX-IR-Score04

GX-IR-Score04 Infrared Remote Control User Manual

For LED Scoreboards and Countdown Clocks

1. Introduction

The GX-IR-Score04 is a general-purpose infrared remote control specifically designed for operating LED scoreboards and countdown clocks. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your remote control to ensure optimal performance.

Infrared remote control GX-IR-Score04 transmitting signal to a digital LED scoreboard displaying 'HOME 00 GUEST 99'.
Figure 1: GX-IR-Score04 Remote Control in operation with a scoreboard.

This image shows the remote control in use, wirelessly connected to a scoreboard.

2. Setup

2.1 Battery Installation

The GX-IR-Score04 remote control requires batteries for operation. Please note that batteries are not included due to transportation policies and must be purchased separately.

  1. Locate the battery compartment on the back of the remote control.
  2. Open the battery compartment cover.
  3. Insert two (2) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.

Battery Specification: 2*AAA batteries

Close-up of the GX-IR-Score04 remote control, clearly showing the model number and lower function buttons.
Figure 2: GX-IR-Score04 Remote Control detail.

Detail of the remote control, emphasizing the model identification and specific function keys.

3. Operating Instructions

The GX-IR-Score04 remote control is designed for intuitive operation of compatible LED scoreboards and countdown clocks. Ensure the remote is pointed directly at the scoreboard's infrared receiver for best performance.

3.1 Button Functions Overview

Top-down view of the GX-IR-Score04 infrared remote control, showing all buttons and their labels.
Figure 3: Top-down view of the GX-IR-Score04 Remote Control.

A clear view of the remote control's layout, detailing each button's function.

  • Power Button (Red Circle): Turns the scoreboard/timer ON or OFF.
  • EDIT Button (Green): Enters or exits edit mode for settings.
  • CLOCK, UP, DOWN, SCORE Buttons (Orange): Used for navigating menus, adjusting values (up/down), and switching between clock and score modes.
  • HOME / GUEST Buttons: Adjusts scores for the home and guest teams.
  • Period Button: Changes the current period/inning.
  • Win+1 Buttons: Increments the win count for respective teams.
  • Score Reset / Match Reset: Resets the current score or the entire match data.
  • Start/Stop (ENTER) Button: Starts or stops the timer/clock, or confirms selections in edit mode.
  • H-Reset / Exchange / G-Reset: Specific reset functions for Home, Exchange (possibly for serve/possession), and Guest.
  • Number Buttons (0-9): For direct input of scores or time values.
  • +2 BALL, +3 STRIKE, OUT, *, # Buttons: Specific functions likely for baseball/softball scorekeeping (e.g., adding balls, strikes, outs).

3.2 Basic Operation

  1. Power On: Press the red Power button.
  2. Adjusting Scores: Use the HOME and GUEST buttons to increment scores. For specific sports, use +2 BALL, +3 STRIKE, OUT buttons.
  3. Managing Time: Use the CLOCK button to switch to time mode. Use UP/DOWN to adjust time, and Start/Stop to begin/pause.
  4. Resetting: Use Score Reset or Match Reset as needed.
  5. Editing Settings: Press the EDIT button to enter settings mode, use UP/DOWN to navigate, and Start/Stop (ENTER) to confirm.

4. Maintenance

4.1 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.

4.2 Battery Care

If the remote controller will not be used for an extended period, please remove the batteries to prevent leakage and potential damage to the device.

5. Troubleshooting

  • Remote not responding:
    • Check if the batteries are correctly installed and not depleted. Replace with fresh AAA batteries if necessary.
    • Ensure there are no obstructions between the remote control and the scoreboard's infrared receiver.
    • Make sure you are within the effective range of the scoreboard's IR receiver.
  • Unsure about compatibility:
    • If you are uncertain whether this remote is suitable for your specific scoreboard or device, please contact customer service with your device's model number for assistance.

6. Specifications

Attribute Value
Model Number GX-IR-Score04
Type Digital Timers / Remote Control
Material Plastic (Body), Rubber (Buttons)
Color White
Function Set Time Reminder, Scorekeeping
Range of Use LED Scoreboard
Battery Specification 2*AAA batteries
Net Weight 0.05 kg
Package Dimensions (L x W x H) 16 cm x 7 cm x 4 cm
Package Weight 0.1 kg
Certification CE / EU
Feature Eco-Friendly
High-concerned chemical None
Origin Mainland China

7. Warranty and Support

7.1 Warranty

This product comes with a 1-month warranty from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications.

7.2 Customer Support

For any questions regarding the operation, compatibility, or if you require an electronic manual for the remote control, please contact customer service. When contacting support, please provide your device's model number for quicker assistance.

8. User Tips

  • Always ensure a clear line of sight between the remote control and the scoreboard for reliable signal transmission.
  • Keep spare AAA batteries on hand, especially before important events, to avoid interruptions.
  • Familiarize yourself with the specific functions of your scoreboard, as the remote's buttons are designed to interact with various scoreboard features.