1. Introduction
Thank you for purchasing the Hippcron JSD-2227 Car MP3 Player. This manual provides detailed instructions for the installation, operation, and maintenance of your new car audio system. Please read this manual thoroughly before use to ensure proper functionality and to maximize your listening experience.
2. Safety Information
- Always operate the vehicle safely. Do not operate the car audio system in a way that distracts you from driving.
- Ensure proper wiring connections to prevent damage to the unit or vehicle.
- Do not expose the unit to moisture or extreme temperatures.
- If a fuse blows, replace it with a fuse of the correct rating.
3. Package Contents
The package includes the following items:
- 1 x MP3 Player (JSD-2227)
- 1 x Power & Car Speaker Cable Set
- 2 x Installation Fix Metal Brackets
- 1 x User Manual
Kindly Attention:
- This car radio does NOT have built-in memory or an included TF card.
- There is NO CD room for a CD Player. This unit does NOT support CD/DVD playback.
- The remote control does NOT come with batteries due to customs issues. The steering wheel remote control uses a CR2025 battery, which needs to be purchased separately.
4. Specifications
| Feature | Description |
|---|---|
| Model Name | JSD-2227 |
| Brand Name | hippcron |
| Placement | In-Dash (1 DIN) |
| Display Size | 2.5" |
| Voltage | 12 V |
| Item Weight | 0.4 kg |
| Origin | Mainland China |
| Certification | CE |
| Special Features | Radio Tuner, Built-in Bluetooth + Microphone, Hands-free calls, Advanced audio transmission, Clock display, USB/TF card reader, MP3/WMA/WAV formats, Folder play function, Remote control support, Rotary electronic volume control, MP3 play supports pause/preview/repeat/random play and 10 tracks up/down selections, Electronic type bass/treble/left and right balance/front and back balance volume control, Front AUX audio input, Rear terminal L / R audio RCA output, 4 track high-power output (4 high-power loudspeakers). |
| Radio Frequency | 87.5-108MHz (FM1-FM2-FM3, 18 preset stations) |
| Package Dimensions | 21 cm (L) x 12 cm (W) x 8 cm (H) |
5. Product Overview
6. Setup and Installation
6.1 Wiring Diagram
Proper wiring is crucial for the functionality and safety of your car MP3 player. Refer to the diagram below for correct connections.
- Power Connections:
- Connect the RED and YELLOW wires to the positive (+) pole of your car's power supply.
- Connect the BLACK wire to the negative (-) pole (ground).
- The BLUE wire is for the automatic antenna.
- The ACC wire connects to the car's ignition switch.
- Speaker Connections: Ensure correct polarity for all speaker connections (positive to positive, negative to negative).
- Fuse Protection: A fuse is included in the wiring. Reverse connection of positive/negative poles may damage the fuse. If this occurs, replace it with a new fuse of the same rating and reconnect the wires.
6.2 Physical Installation
The unit is a standard 1 DIN size. Use the provided installation fix metal brackets to secure the player into your car's dashboard slot.
7. Operating Instructions
7.1 Power On/Off
- To Turn On: Short press the power button.
- To Turn Off: Short press the power button again.
- Note: When first powered on, you might hear FM noise if there's no signal. This is normal. The next time it's turned on, it will resume playing the last FM station.
7.2 Clock Setting
- Long press the "CLK" button. The "minute" display will flash.
- Rotate the volume control knob to adjust the minutes.
- Short press "CLK" or the volume control knob. The "hour" display will flash.
- Rotate the volume control knob to adjust the hours.
- Long press "CLK" again or wait for 3 seconds to save the time.
Note: The clock may remain displayed when the radio is off in some cars. This depends on the vehicle's pre-installation wiring (whether the radio is connected to constant battery power or ignition-switched power), and is not an issue with the device itself.
7.3 FM Radio Operation
- Auto-Scan and Store (AMS): Short press the "AMS" button. The radio will scan from FM 87.5 to 108MHz and automatically store up to 18 radio stations across FM1, FM2, and FM3 bands (e.g., F1P1 ~ F1P6). It will then play through the found stations in order before returning to the first station.
- Semi-Automatic Search: Short press the ">>" or "<<" buttons to manually search for stations. When you find a desired station, press the opposite button to stop the search.
- Saving a Station: Once you've found a desired station, long press one of the 1-6 memory station buttons for 5 seconds to save it.
7.4 Bluetooth Connection
- Activate Bluetooth Mode: Short press the "BODE" button until "BT" is displayed on the LCD screen.
- Pairing: On your mobile phone, search for Bluetooth devices and select "CAR-BT". The default pairing password is "0000". Some phones may connect automatically without needing to enter a password.
- Connection Confirmation: Once successfully paired, the LCD screen will display "BT ON".
- Bluetooth Calls:
- To answer an incoming call: Short press the call button.
- To end a call: Short press the call button.
7.5 Media Playback (USB, TF Card, AUX)
- USB/AUX Playback: Insert a USB disk into the USB port or connect a portable player via a 3.5mm AUX cable to the front AUX input. The audio will play through the car speakers.
- TF Card Playback: Gently push an SD/MMC (TF) card into the card slot. Select "SD" using the mode selector. Music will begin playing automatically.
- MP3 Playback Controls:
- Pause/Resume: Press the play/pause button during playback to pause, press again to resume.
- INT (Introduction): Press this button to play the first few seconds of each track. Press again to stop the introduction and listen to the full track.
- RPT (Repeat): Press this button to repeat the currently selected track continuously. Press again to cancel repeat mode.
- RDM (Random): Press this button to play tracks in random order. Press again to cancel random mode.
- -10/+10 Tracks: Short press the corresponding button to skip -10 or +10 tracks.
- Folder Selection: Long press the -10 or +10 buttons to choose a folder.
7.6 Sound Settings
- The unit features electronic type bass/treble, left and right balance, and front and back balance volume control. Use the rotary volume control and menu options to adjust these settings to your preference.
7.7 App Control
This unit supports APP control for various functions, including FM radio tuning, changing button colors, and adjusting sound effects/position.
- Connecting via APP: Connect your smartphone to the car radio via Bluetooth. Once connected, open the dedicated APP (if available, usually found by scanning a QR code in the full manual or product packaging) to access advanced controls.
- Features via APP:
- FM Radio Control: Tune FM stations directly from your phone.
- Color Customization: Change the 7-color button lighting to match your preference.
- Sound Effects: Select different sound effects (e.g., Pop, Rock, Classic).
- Sound Position: Adjust the sound balance to specific areas within the car.
7.8 Fast Charging
The unit includes a USB port that supports fast charging for your mobile devices, ensuring your phone stays powered on the go.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the unit's surface. Do not use abrasive cleaners or solvents.
- Fuse Replacement: If the unit stops functioning due to a blown fuse, replace it with a new fuse of the same amperage rating (e.g., 10A). Always disconnect power before replacing fuses.
- General Care: Avoid spilling liquids on the unit and protect it from direct sunlight and excessive heat.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Blown fuse; Incorrect wiring; Loose connection | Check and replace fuse if necessary. Verify all power wires (Red, Yellow, Black) are securely connected with correct polarity. |
| No sound from speakers | Incorrect speaker wiring; Volume too low; Mute activated | Check speaker connections and polarity. Increase volume. Ensure mute function is off. |
| FM radio static/poor reception | Weak signal; Antenna issue | Ensure antenna is properly connected. Try auto-scanning for stations again. Move to an area with better signal. |
| Bluetooth not connecting | Bluetooth not enabled; Incorrect pairing; Device too far | Ensure unit is in Bluetooth mode. Re-attempt pairing with password '0000'. Keep devices within range. |
| USB/TF card not playing | Unsupported file format; Corrupted media; Incorrect mode selected | Ensure media contains MP3/WMA/WAV files. Check if media is corrupted. Select correct mode (USB/SD). |
| Remote control not working | No battery; Dead battery; Obstruction | Insert a CR2025 battery. Replace battery if dead. Ensure no obstructions between remote and unit's IR sensor. |
10. User Tips
- For optimal sound quality, experiment with the bass, treble, and balance settings to match your car's acoustics and personal preference.
- When using the fast charging feature, ensure your device's charging cable is in good condition for efficient power delivery.
- If you frequently use a specific media source (USB, TF, AUX), consider setting it as the default startup mode if the unit supports it, or simply switch modes quickly using the 'BODE' button.
11. Warranty and Support
The Hippcron JSD-2227 Car MP3 Player comes with a 1-year warranty. For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
For additional information or to view the full user manual in PDF format, please refer to the following link: User manual (PDF)
