1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Bonroad Wireless CarPlay and Android Auto Module. This module enhances your Mercedes-Benz vehicle's infotainment system by integrating wireless CarPlay and Android Auto functionalities, allowing seamless access to navigation, music, communication, and other smartphone features directly on your car's display.

Figure 1: Bonroad Wireless CarPlay Android Auto Module and integrated in-car display.
2. Compatibility
This module is designed for Mercedes-Benz vehicles equipped with the NTG 5.0/5.1 system. It is NOT compatible with NTG 4.0/4.5/4.7 systems.

Figure 2: Compatible Car Models and System Distinction.
2.1 Compatible Car Models (NTG 5.0/5.1 System)
| Car Model | Year | NTG System | Screen Size |
|---|---|---|---|
| A Class W176 | 2016-2018 | NTG5 | 7"/8.4"/12.3" |
| B Class W246 | 2016-2018 | NTG5 | |
| C Class W205 | 2015-2018 | NTG5 | 7.4"/8.4" (800*480) |
| CLA Class | 2016-2018 | NTG5 | |
| CLS Class W218 | 2015-2016 | NTG5 | 8.4" (960*540) |
| E Class sedan W212 | 2015 | NTG5 | |
| E Class coupe C207 A207 | 2015 | NTG5 | 12.3" (1440*540) |
| G Class W463 | 2016-2017 | NTG5 | |
| GLA Class X156 | 2016-2018 | NTG5 | 7.4"/8.4" (800*480) |
| GLC Class X253 C253 | 2015-2018 | NTG5 | |
| GLE GLS Class | 2016-2018 | NTG5 | 8.4" (960*540) |
| SLK R172 | 2016-2018 | NTG5 | |
| S Class W222 | 2014-2018 | NTG5 | 12.3" (1440*540) |
| CL Class W216 C216 | 2014-2018 | NTG5 | |
| V Class W447 | 2015-2018 | NTG5 | 7.4"/8.4" (800*480) |
| X Class W470 | 2015-2018 | NTG5 |
To determine your car's NTG version, refer to your vehicle's infotainment system interface. The module is compatible only with NTG 5.0/5.1 systems.
3. Setup and Installation
Installation of this module requires technical expertise and careful handling of your vehicle's electrical and infotainment systems. It is highly recommended to seek professional installation if you are not comfortable performing these steps yourself. A detailed PDF user manual with wiring diagrams is available for reference: User Manual (PDF).
3.1 Module Connection
The module connects to your car's existing wiring. Key connections include:
- Connect the original car power cable (48PIN).
- Connect the WIFI antenna.
- Connect the original fiber optic cable to the retrofit plug.
- Connect the original LVDS cable.

Figure 3: General connection diagram for the module.
3.2 NTG 5.0/5.1 System Settings
Configure the module settings based on your car model and screen size. Refer to the table below:
| Car Model Group | Screen Size | DIP Switch Setting (OFF/ON) |
|---|---|---|
| C/GLC/V/S | 7.4"/8.4" (800*480) | OFF OFF |
| A/B/CLA/CLS/CLE/CLS/E | 8.4" (960*540) | OFF ON |
| All models | 12.3" (1440*540) | ON ON |
3.3 Wireless CarPlay Connection
- On your phone, enable Wi-Fi and Bluetooth.
- On the car's display, navigate to the module's settings and select "Discover and connect device".
- Select the Bluetooth device name starting with "CX_BT..." (e.g., "CAR-BT-5334") and pair your phone.
- Confirm CarPlay usage on your phone when prompted.
3.4 Wireless Android Auto Connection
- On your phone, enable Wi-Fi and Bluetooth.
- On the car's display, navigate to the module's settings and select the Bluetooth device name starting with "CX-BTXXXX" and pair your phone.
3.5 Reversing Camera Wiring
If you are adding a reversing camera, connect it as follows:
- CAM-POWER: Connect to the camera's power supply.
- REAR-CVBS: Connect to the camera's video input.

Figure 4: Reversing camera wiring connections.
4. Operating Instructions
4.1 Switching Between Systems
You can freely switch between the original car system and the CarPlay/Android Auto system using the car's iDrive button. Long press the BACK button to switch to the CP system.

Figure 5: Using the iDrive button to switch between original and CarPlay systems.
4.2 CarPlay & Android Auto Features
The module adds comprehensive smartphone integration without altering your original car screen. Key features include:
- Navigation Maps: Access Google Maps, Waze, Apple Maps, and other navigation applications directly on your car's screen.
- Online Music: Connect your phone via Bluetooth to stream music and enjoy your favorite playlists.
- Hands-Free Calling: Make and receive calls directly from the car's display, ensuring safe driving.
- Siri Voice Control: Use voice commands to play music, navigate, and make calls, keeping your hands on the wheel.
- USB Flash Drive: Support for media playback from USB flash drives.
- Reversing: Integration with reversing camera systems.

Figure 6: Key features of the Wireless CarPlay Upgrade Module.
4.3 Audio Settings
To ensure proper audio output, connect your cell phone's Bluetooth to the original car's Bluetooth audio system and select Bluetooth audio playback.
- Volume: Adjust audio output levels.
- MIC Sensitivity: Configure microphone input sensitivity.
- EQ: Equalizer settings for audio customization.
- Original MIC: Option to use the original car microphone.
- Use the original Bluetooth Audio: Ensure this is enabled for audio routing.
- Automatic echo cancellation: Helps improve call quality.
Important: For audio to function correctly, your phone's Bluetooth must be connected to the original car's Bluetooth audio, and Bluetooth audio playback must be selected.
5. Maintenance
The Bonroad Wireless CarPlay Android Auto Module is designed for durability and requires minimal maintenance. To ensure optimal performance:
- Keep the module and surrounding areas clean and free from dust.
- Avoid exposing the module to extreme temperatures or moisture.
- Ensure all connections remain secure.
- Periodically check for firmware updates from the manufacturer to enhance functionality and resolve potential issues.
6. Troubleshooting
If you encounter issues with your module, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| No sound during calls or media playback. |
|
| CarPlay/Android Auto does not connect wirelessly. |
|
| Module not functioning after installation. |
|
| Microphone not picking up voice during calls. |
|
If the problem persists, please refer to the full PDF user manual or contact customer support.
7. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 9-16 V |
| Operating Temperature | -30 ~ +75°C |
| Power Consumption (rated) | 500mA (Max 3A) |
| Quiescent Current | Less than 3 mA |
| Stored Temperature | -30 ~ +85°C |
| Environment Humidity | ≤ 98% (at 45°C), 65±5% (rated) |
| Shutdown Current | 3 mA (Clock is on) |
| Charging Current (USB) | ≤ 2 A (Host activates circuit protection if >1A to control current below 1.5A) |
7.1 Product Package Dimensions
- Length: 20 cm
- Width: 15 cm
- Height: 10 cm
- Weight: 1.2 kg
8. User Tips
- Verify Compatibility: Always confirm your Mercedes-Benz vehicle has the NTG 5.0/5.1 system before installation to avoid compatibility issues.
- Professional Installation: If you are unsure about the wiring or technical aspects, consider professional installation to prevent damage to the module or your vehicle.
- Audio Troubleshooting: If you experience issues with voice during calls, ensure your phone's Bluetooth is correctly paired with the car's original Bluetooth audio and that the module's audio settings are configured to use the original Bluetooth audio.
- Refer to PDF: For detailed wiring diagrams and specific installation instructions, always consult the comprehensive PDF user manual.
9. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to the provided PDF user manual for additional information and detailed diagrams.
User Manual (PDF): https://manuals.plus/m/173f01647519a61313272d64bd85f3fc3d5842e70920ece95c8ae24b4f58584a