1. Introduction
The MESTEK SL750 and SL750B are high-precision digital sound level meters designed for accurate noise measurement. These multi-functional handheld devices integrate data retention, backlight, maximum value reset, and automatic shutdown features to meet diverse measurement needs. The SL750 model provides A-weighted measurements, while the SL750B offers both A/C-weighted measurements and a color screen.

2. Product Overview
The MESTEK sound level meter is a robust and user-friendly device. Its ergonomic design with soft rubber material on both sides ensures a comfortable grip for extended use. The device features a capacitive microphone for accurate decibel capture.

Accessories List
The standard package includes:
- Noise detector (Host)
- Instruction manual
- Packaging box

3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the device.
- Open the cover.
- Insert three (3) 1.5V AAA batteries, ensuring correct polarity (+/-). Batteries are not included.
- Close the battery compartment cover securely.
3.2 Sponge Ball Protective Cover
The device comes with a sponge ball protective cover. This cover should be placed over the microphone to protect it and ensure the accuracy of test data, especially in environments with wind.

4. Operating Instructions
4.1 Power On/Off
- Press the Power button (
) to turn the device on. - Press and hold the Power button to turn the device off.
- The device features automatic shutdown to conserve battery life.
4.2 Measurement Modes (SL750B)
The SL750B model supports both A and C weighting modes:
- A-weighting: Simulates human auditory perception, suitable for general environmental noise assessment.
- C-weighting: Measures mechanical noise, suitable for evaluating the noise output of machinery.
To switch between A/C weighting (SL750B only), press the A/C button.

4.3 Fast/Slow Sampling Rate
The device offers adjustable fast and slow time weighting modes:
- FAST mode: 125ms sampling rate, suitable for capturing sudden or rapidly changing noise levels.
- SLOW mode: 1000ms sampling rate, suitable for measuring average noise levels over time.
Press the FAST/SLOW button to toggle between these modes.

4.4 MAX/MIN Measurement (SL750B)
The SL750B model allows for easy switching between maximum and minimum measured values. Press the MIN/MAX button to view the minimum or maximum noise level recorded during a measurement session.

4.5 Data Retention (HOLD)
To hold the current measurement on the display, press the HOLD button. Press it again to resume live measurement.
4.6 MAX Value Reset
After a measurement, the maximum value can be automatically locked. To reset this value, short press the MAX button.

4.7 Screen Backlight
To enable or disable the screen backlight, press the Backlight button (
). This feature allows for measurements in dim environments.

4.8 Display Interpretation
The display provides various indicators and measurement values:


4.9 Common Noise Range Reference
Refer to the table below for a general understanding of common noise levels:

5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Sponge Ball: Regularly check the sponge ball for wear and tear. Replace if damaged to ensure accurate readings and microphone protection.
- Battery Replacement: Replace batteries when the low battery indicator appears on the display. Always use fresh 1.5V AAA batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Refer to specifications for recommended storage temperature and humidity.
6. Troubleshooting
- Device does not power on: Check battery installation and ensure batteries are fresh.
- Inaccurate readings: Ensure the sponge ball is properly installed and not damaged. Avoid measuring in strong winds without the cover. Check for any obstructions to the microphone.
- Display issues: If the display is dim, activate the backlight. If the display is blank or shows errors, try replacing the batteries.
- Device freezes: Turn the device off and then on again. If the issue persists, remove and reinsert the batteries.
7. Specifications
| Parameter | Value |
|---|---|
| Product Name | High precision noise detector |
| Model | SL750 (A-Weighted), SL750B (A/C-Weighted; color screen) |
| Measurement Range | 30-130dB |
| Sampling Rate FAST | 125ms |
| Sampling Rate SLOW | 1000ms |
| Noise Accuracy | ±2.0dB |
| Reference Sound Pressure Standard | 94dB/1KHz |
| Frequency Response | 31.5Hz~8KHz |
| Resolution | 0.1dB |
| Power Supply | 3x1.5V AAA (not included) |
| Working Current | ≤8mA |
| Working Temperature | 0-40°C |
| Working Humidity | ≤80% RH |
| Storage Temperature | -20~60°C |
| Storage Humidity | ≤75% RH |
| Dimensions | 206x53x34mm |
| Weight | Approximately 180g (Excluding battery) |

8. User Tips
- For general environmental noise, use A-weighting. For machinery or industrial noise, consider C-weighting (SL750B).
- Use the FAST mode for quick, transient noise events and SLOW mode for more stable, average readings.
- Always ensure the sponge ball is on the microphone to prevent wind noise interference, especially outdoors.
- The backlight feature is very useful in low-light conditions, but remember to turn it off when not needed to save battery.
- Regularly check the battery level indicator to avoid interruptions during critical measurements.
9. Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer's customer service. Keep your purchase receipt as proof of purchase.