1. Product Introduction
The Goodtop Ethernet 10G fiber optic transceiver is a versatile Ethernet transmission medium conversion unit. It facilitates the conversion of short-distance Ethernet cable electrical signals into long-distance optical signals, making it ideal for extended data transmission and data aggregation applications. This device offers plug-and-play functionality, high compatibility, and supports fiber optic transmission distances up to 120 kilometers. It is compatible with single-mode/multi-mode, single fiber/dual fiber optical modules.
Key Features:
- Achieves up to 100KM data transmission via fiber optic access.
- Supports port lightning protection.
- Utilizes a store-and-forward exchange mechanism.
- All ports support line speed switching and giant frame transmission.
- Zero configuration feature for automatic adaptation to devices.
- Panel indicator lights provide real-time working status and aid in fault analysis.
- Supports IEEE802.3af/at/bt (for PoE BT series, not applicable to LG-10GE-XS).
2. Package Contents
Upon opening the package, please verify that all the following items are included:
- Transceiver: 1 Pc
- Power adapter: 1 Pc
- Certificate of Conformity: 1 Pc
- Warranty card: 1 Pc
Attention: SFP modules are not included by default. If you find any shortage or damage to accessories, please contact us promptly.
3. Dimensions
The dimensions of the LG-10GE-XS media converter are as follows:
- Product Dimension: 93mm (Length) x 70mm (Width) x 28mm (Height)
- Package Dimension: 210mm x 175mm x 43mm
- Net Weight: 206g
- Gross Weight: 366g
4. Installation
4.1. Safety Precautions
For the safe installation and operation of the switch, we recommend that you:
- Check if the power cord is securely wrapped around the AC power connector.
- Ensure proper heat dissipation and ventilation around the switch.
- Do not stack heavy objects on top of the switch.
4.2. Desktop Installation
When installing the media converter on a desktop, the device must be placed horizontally and kept stable. Ensure sufficient space between the device and surrounding objects for proper ventilation.
4.3. Power Connection
The switch adapter uses a two-wire power socket. The power cord uses a single-phase three-wire power socket, with the middle pin as the grounding wire, the left pin as the neutral wire, and the right pin as the live wire. Please check before operation.
- Verify that the power supply matches the power supply indicated on the switch.
- Connect the adapter and power cord+adapter directly to an AC 100~240V, 50/60Hz mains power outlet.
4.4. SFP Port Connection
To install fiber optic modules:
- Grasp the fiber optic module from the side.
- Smoothly insert it along the SFP port slot of the switch until the fiber optic module is in firm contact with the switch.
4.5. Post-Installation Check
After installation, please check the following:
- Is there sufficient heat dissipation space around the switch, and is the air circulation smooth?
- Does the power supply of the power socket meet the specifications of the switch?
- Are the power supply, switches, racks, and other equipment properly grounded?
5. Operation and LED Indicators
The media converter features LED indicators to monitor its working status and assist in fault analysis. Refer to the table below for the definition of each indicator light.
| Indicator | State | Description |
|---|---|---|
| Power indicator: PWR | on | Power on |
| off | Power off | |
| blink | Port short circuit or excessive load current | |
| Right Port (RJ45) | Link (off) | The corresponding network port is not connected |
| Link (on) | There is a connection to the corresponding network port | |
| Link (blink) | Corresponding network port connection and communication | |
| R/G (off) | The corresponding network port does not work in this mode | |
| R/G (on, red) | The corresponding network port is connected and operates in 10G mode | |
| R/G (on, green) | The corresponding network port is connected and operates in 2.5G mode | |
| Left Port (SFP+) | Link (off) | The corresponding optical port is not connected |
| Link (on) | Corresponding optical ports have connections | |
| Link (blink) | Corresponding optical port connection and communication | |
| R/G (off) | The corresponding optical port does not work in this mode | |
| R/G (on, red) | The corresponding optical port is connected and operates in 10G mode | |
| R/G (on, green) | The corresponding optical port is connected and operates in 2.5G mode | |
| EX Indicator | off | None (for non-PoE models) |
6. Product Application Scenarios
The Goodtop 10Gbps SFP+ Fiber to RJ45 Media Converter can be integrated into various network environments to extend Ethernet reach and convert media types. Below are some typical application scenarios:
7. Specifications
Detailed technical specifications for the LG-10GE-XS model:
| Parameter | Value (LG-10GE-XS) |
|---|---|
| Model | LG-10GE-XS |
| Fixed Port | 1*100M/1G/2.5G/5G/10G RJ45, 1*1G/2.5G/10G SFP+ |
| Bandwidth | 40Gbps |
| Packet Forwarding | 29.76Mpps |
| MAC Address Table | 8K |
| Packet Buffer | 8.1M |
| Jumbo Frame | Max 12KB |
| VLAN Address | 4K |
| Function | Force fiber optic to reach 2.5G speed |
| Transmission Distance | 100BASE-TX: Cat5 or later UTP (150 m) 2500/1000BASE-TX: Cat6 or later UTP (100 m) 5G BASE-TX: Cat6 or later UTP (80 m) 10G BASE-TX: Cat6 or later UTP (50 m) SFP+: 100M/1G/2.5G/10G single-mode/multimode optical module, maximum distance = 120km (depending on optical module) |
| Power Input | DC12V 1A (5.5*2.1mm) |
| Operating Temperature/Humidity | -20~+60°C; 5%~90% RH Non-condensing |
| Storage Temperature/Humidity | -40~+85°C; 5%~95% RH Non-condensing |
| Product Size (L*W*H) | 70mm*93mm*28mm |
| N.W/G.W (kg) | 0.2kg/0.75kg |
| Lightning Protection Level | 6KV 8/20us IP30 |
| Installation Method | Desktop or DIN installation method |
| Certificates | CE-EMC EN55032; CE-LVD EN62368; FCC Part 15 Class B; RoHS |
| Warranty | Whole device for 1 year (Accessories not included) |
8. Troubleshooting
If you encounter issues with your media converter, consider the following common troubleshooting steps:
- No Power: Check the PWR LED indicator. If it's off, ensure the power adapter is securely connected and the power outlet is functional. If it blinks, there might be a port short circuit or excessive load current.
- No Link/Connection: If the Link LED for either the RJ45 or SFP+ port is off, verify that the cables are correctly connected and not damaged. Ensure the optical module (if used) is properly seated and compatible.
- Incorrect Speed: If the R/G LED indicates an unexpected speed (e.g., green for 2.5G when 10G is expected, or red for 10G when 2.5G is expected), check the connected device's speed settings and cable compatibility. Ensure the SFP+ module supports the desired speed.
- Data Transfer Issues: If the Link LED is on but not blinking, there might be no data transfer. Check the network configuration of connected devices.
- Overheating: Ensure the device has adequate ventilation. Multiple cooling holes on both sides provide multi-hole ventilation and heat dissipation to prevent high-temperature overloading.
- Lightning Protection: The device features 6KV lightning protection. However, in severe thunderstorms, it's advisable to disconnect the device if possible.
For more detailed troubleshooting or persistent issues, please refer to the full user manual PDF or contact customer support.
9. User Tips
- 1Gb Fiber Connection: Yes, this media converter is compatible with 1Gb fiber connections, as it supports 1G/2.5G/10G SFP+ optical ports.
- Per Piece Pricing: The product is typically sold per piece, not as a pair, unless explicitly stated otherwise in the product listing.
10. Warranty and Support
The Goodtop 10Gbps SFP+ Fiber to RJ45 Media Converter comes with a 1-year warranty for the main device. Please note that accessories are not included in this warranty.
For further assistance, technical support, or warranty claims, please contact GoodTop Official Store customer service.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)
11. Frequently Asked Questions (FAQ)
- Q: Can this product be used with a 1Gb fiber connection?
- A: Yes, the LG-10GE-XS model supports 1G, 2.5G, and 10G SFP+ optical ports, making it compatible with 1Gb fiber connections.
- Q: Is the price for one piece or a pair?
- A: The product is sold per piece. If you require a pair for a fiber link, you would need to purchase two units.
