1. Product Overview
The LOEFME 2.5L Dehumidifier is designed to efficiently remove excess moisture from the air, helping to prevent dampness, mold, and mildew in various indoor spaces. Utilizing advanced thermoelectric cooling technology, it can extract up to 1.2 liters of moisture per day, making it suitable for medium to large rooms.

Figure 1: LOEFME 2.5L Dehumidifier
Key Features:
- High-Efficiency Dehumidification: Extracts approximately 1.2 liters of moisture per day (at 30°C, 80% RH).
- Large Water Tank: Features a 2.5-liter capacity water tank with automatic bucket full shut-off.
- Timer Function: Programmable 8, 12, or 24-hour auto-off timers.
- Multiple Operating Modes: Includes Auto, Continuous, and Sleep modes.
- Automatic Humidity Sensor (Humidistat): Maintains desired humidity levels.
- Defrosting System: Ensures efficient operation in cooler conditions.
- Quiet Operation: Operates at less than 41dB in Sleep mode.
- 7-Color Ambient Light: Adds a decorative element to your space.
- Continuous Drainage Option: Includes a drainage hose for direct water removal.
2. Setup and Installation
2.1 Unpacking
- Carefully remove the dehumidifier from its packaging.
- Remove all packing materials, including any protective films or tapes.
- Inspect the unit for any signs of damage. If damaged, do not operate and contact customer support.
2.2 Placement
Proper placement is crucial for optimal performance. The dehumidifier is designed for areas between 15-35 square meters.
- Place the unit on a flat, stable surface.
- Ensure there is at least 20 cm (8 inches) of clear space around all sides of the dehumidifier to allow for proper airflow.
- Avoid placing the unit near heat sources, in direct sunlight, or in areas with excessive dust.
- Do not block the air inlet or outlet vents.

Figure 2: Applicable areas for the dehumidifier (15-35m²)
2.3 Power Connection
- Ensure the power cord is securely plugged into a compatible 240V electrical outlet.
- The unit is designed for an EU Plug type.
2.4 Continuous Drainage Setup (Optional)
For continuous operation without needing to empty the water tank, you can use the included drainage hose:
- Locate the continuous drainage port on the back or side of the unit.
- Connect one end of the drainage hose to this port.
- Route the other end of the hose to a suitable drain or a larger container, ensuring the hose is sloped downwards to allow gravity drainage.
- Ensure the hose is not kinked or blocked.
3. Operating Instructions
3.1 Control Panel

Figure 3: Control Panel Functions
- Power Button (⏻): Turns the unit On or Off.
- Light Button (💡): Activates or cycles through the 7-color ambient light feature.
- Sleep Mode Button (🌛): Engages a quieter operating mode for nighttime use.
- Automatic Defrost (☃️): Indicates the automatic defrost function is active.
- Timer Button (⏱️): Sets the auto-off timer for 8, 12, or 24 hours.
3.2 Starting the Dehumidifier
- Plug the unit into a suitable power outlet.
- Press the Power Button (⏻) to turn on the dehumidifier. The digital display will illuminate.
3.3 Selecting Operating Modes
The dehumidifier offers three operating modes:
- Auto Mode: The unit will automatically adjust its operation based on the ambient humidity detected by the built-in humidistat.
- Continuous Mode: The dehumidifier will run continuously, collecting moisture until the water tank is full or manually turned off.
- Sleep Mode: Reduces fan speed and noise level for quiet operation, ideal for bedrooms. The ambient light can be turned off in this mode.
3.4 Setting the Timer
To set the auto-off timer:
- Press the Timer Button (⏱️).
- Each press will cycle through 8H, 12H, and 24H settings. The selected time will be displayed.
- The unit will automatically turn off after the set time has elapsed.

Figure 4: Digital Display with Timer Options
3.5 Ambient Light
Press the Light Button (💡) to turn on the 7-color ambient light. Press again to cycle through colors or turn it off.
4. Maintenance
4.1 Emptying the Water Tank
When the water tank is full, the unit will automatically shut off, and an indicator light may illuminate. Empty the tank as follows:

Figure 5: Easy Emptying of Water Tank
- Gently pull out the water tank from the front of the dehumidifier.
- Remove the lid of the water tank.
- Carefully pour out the collected water.
- Replace the lid securely and slide the water tank back into the unit until it clicks into place.
4.2 Cleaning the Unit
- Always unplug the dehumidifier before cleaning.
- Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Clean the air inlet and outlet vents regularly with a soft brush or vacuum cleaner attachment to prevent dust buildup.
4.3 Filter Cleaning
While specific filter cleaning instructions are not provided, it is generally recommended to regularly check and clean the air filter to maintain optimal performance. Gently remove any visible dust or debris from the filter area, typically located behind the air inlet.
5. Troubleshooting
If you encounter issues with your dehumidifier, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dehumidifier does not turn on. | No power supply. | Check if the power cord is securely plugged into a working outlet. |
| Unit is running but not collecting water. | Room temperature too low. | The operating range is 5 – 32 °C. Dehumidifiers are less effective in very cold conditions. |
| Air inlet/outlet blocked. | Ensure there is sufficient space around the unit and vents are clear. | |
| Humidity level already low. | The unit may not collect water if the ambient humidity is below the set point or already low. | |
| Water tank full indicator is on, but tank is not full. | Water tank not properly seated. | Remove and reinsert the water tank, ensuring it is correctly positioned. |
| Unit is making unusual noise. | Unit not on a level surface. | Place the dehumidifier on a flat, stable surface. |
| Obstruction in fan. | Unplug the unit and check for any foreign objects near the fan or vents. |
If the problem persists after trying these solutions, please contact customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | Loefme |
| Model | 2.5L Dehumidifier |
| Dehumidifying Technology | Thermoelectric Cooling |
| Capacity (pints / 24h) | 1200ml/D (1.2L/24h at 30°C, 80% RH) |
| Water Tank Capacity | 2.5 Liters |
| Power (W) | 22.5W |
| Voltage | 240V |
| Application Area | 15-35 m² |
| Operating Range | 5 – 32 °C |
| Noise Level | <41 dB (Sleep Mode) |
| Dimensions (L x W x H) | 18.4 x 13.5 x 32 cm |
| Net Weight | 2.5 kg |
| Certification | CE |
| Functions | Automatic Bucket Full Shut-Off, Defrosting System, 24-Hour Timer, 7-Color Ambient Light, 3-Mode Operation (Auto, Continuous, Sleep) |
7. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.
8. User Tips
- Optimal Placement: For best results, place the dehumidifier in the center of the room or area you wish to dehumidify, rather than tucked away in a corner.
- Close Doors and Windows: To maximize efficiency, ensure all doors and windows in the room are closed while the dehumidifier is operating.
- Regular Cleaning: Periodically clean the air intake and exhaust vents to prevent dust buildup, which can hinder performance and increase energy consumption.
- Continuous Drainage for Long-Term Use: If you plan to use the dehumidifier for extended periods, consider setting up the continuous drainage option to avoid frequent manual emptying of the water tank.
- Use Sleep Mode at Night: Activate Sleep Mode for a quieter environment during sleeping hours, ensuring minimal disturbance.