Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your FLIPSKY FT60BD Dual Drive Electronic Speed Controller (ESC). The FT60BD is designed for high-performance DIY electric skateboards, scooters, and ebikes, offering robust power management and advanced control features.
Specifications
| Parameter | Value |
|---|---|
| Firmware | V1.4 or above (update via Flipsky ESC Tool) |
| Voltage Range | 14V-60V (safe for 4S-12S LiPo) |
| Continuous Current | 60A / Single; 120A / Dual (dependent on mounting and ambient temperature) |
| Peak Current | 150A / Single; 300A / Dual |
| Communication Ports | USB, CAN, UART, PPM, ADC |
| Input Signals Support | PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro), PAS |
| Startup Modes Support | IPDS (sensorless), HFPI (sensorless), HALL (sensored), Encoder (ABI, AS5047 encoder SPI interface) |
| BEC Output | 5V@1A |
| Speed Gear Levels | Low, Medium, High, Reverse |
| External Light/Horn Support | Front Lights, Rear Brake Lights & Horn (12V 4A) |
| Programmability | Yes |
| Regenerative Capacity | Yes |
| Smart Switch | Slide Poweron & Auto shutdown (customizable auto power-off time) |
| Switch Diameter | 16mm (self-resetting with green LED) |
| Power Wire Size | 12AWG |
| Motor Wire Size | 12 AWG |
| Dimensions (L*W*H) | 85mm * 70mm * 25mm (including heatsink) |
| Material | Metal |
| Weight | 116g |
| IP Rate | IP65 |
Features
- Equipped with AT32F403ARCT7 CPU (ARM Cortex-M4 architecture) for high performance, supporting 240MHz clock speed and 25KHz max PWM switching frequency for improved motor RPM.
- Highly programmable via Flipsky ESC Tool, allowing compatibility with various motor types, battery voltages, and control methods.
- Supports programming via Flipsky remote controller VX4 (firmware version VX4_V1.4.0 or above).
- Motor FOC (Field-Oriented Control) support for low working noise and smooth starting.
- Provides real-time data monitoring and fault alerts for enhanced safety and diagnostics.
- Features adaptive variable PWM frequency control.
- Supports both sensored (HALL) and sensorless (IPDS, HFPI) motor modes.
- Offers multiple control types: Current, Duty Cycle, Speed control, and Position Control.
- Comprehensive protection functions including low/high voltage, over-current, abnormal temperature, MOSFET over-temperature/over-current, battery over-discharge, and motor over-temperature protection.
- Integrated smart switch function with sliding power-on and automatic shutdown, with adjustable auto power-off time via Flipsky ESC Tool.
- Supports extra interfaces for front lights, brake lights, and horn fixtures (12V 4A output).
- Compatible with multiple motor temperature sensor types (e.g., NTC-10K-25℃, NTC-10K-100℃, PT1000, PTC-1K-100℃, KTY).
Setup
Careful wiring is essential for the safe and proper operation of the FT60BD ESC. Refer to the diagrams below for detailed connection instructions.
1. Pinout Diagram

- 1. POWER SWITCH (Master): Connect the self-resetting switch here.
- 2. ADC/PAS (Master): For Analog-to-Digital Converter and Pedal Assist System inputs.
- 3. UART (Master): Universal Asynchronous Receiver-Transmitter for communication, compatible with Flipsky remotes.
- 4. HALL (Master): For Hall sensor input from the master motor.
- 5. CAN POWER (Master): For CAN bus power.
- 6. USB (Master): USB port for the master ESC.
- 7. PPM (Master): Pulse Position Modulation input for remote control.
- 8. USB (Slave): USB port for the slave ESC.
- 9. HALL (Slave): For Hall sensor input from the slave motor.
- Brake Light, Front Light, Horn: Dedicated 12V outputs for external accessories.
2. Overall Wiring Diagram

- Battery Connection: Connect your 4S-12S LiPo battery to the main power input (red and black thick wires). Ensure correct polarity.
- Motor Connections: Connect the master and slave motors to their respective outputs (A, B, C for each motor). Ensure Hall sensor wires (if sensored motors are used) are connected to the HALL ports.
- Power Switch: Connect the self-resetting switch to the designated port (labeled '1' in Figure 1).
- Peripherals: Connect front lights, brake lights, and horn to their respective 12V output ports as shown in Figure 1 and 2.
- Communication: Connect your remote control (e.g., Flipsky VX4) via UART or PPM ports. Use the USB ports for connecting to the Flipsky ESC Tool for configuration.
Important: Always double-check all connections before applying power to prevent damage to the ESC or other components.
Operating Instructions
Power On/Off
- Power On: The FT60BD supports a "Slide Poweron" feature. Alternatively, press the connected self-resetting switch to power on the system. The green LED on the switch will illuminate.
- Power Off: The ESC features an "Auto shutdown" function. The auto power-off time can be customized using the Flipsky ESC Tool. To manually power off, press and hold the self-resetting switch.
Speed Control
The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse. These can typically be controlled via your connected remote control (e.g., Flipsky VX4) or configured through the Flipsky ESC Tool.
Configuration and Monitoring
- Flipsky ESC Tool: Connect the ESC to a computer via USB to access the Flipsky ESC Tool. This software allows for comprehensive configuration, firmware updates, motor detection, and adjustment of various parameters including auto-shutdown time.
- Real-time Data: The ESC provides real-time data and fault alerts, which can be monitored through the Flipsky ESC Tool or compatible remote controls.
Maintenance
- Regular Inspection: Periodically check all wiring connections for looseness or damage. Ensure motor wires and sensor cables are securely attached.
- Cleanliness: Keep the ESC and its heatsink free from dust, dirt, and debris to ensure optimal cooling. Use a soft brush or compressed air for cleaning.
- Environmental Conditions: Avoid operating the ESC in excessively wet, dusty, or high-temperature environments beyond its specified working temperature range (-20℃ to +70℃). The IP65 rating provides protection against dust and low-pressure water jets, but it is not fully waterproof.
- Firmware Updates: Check the Flipsky website periodically for firmware updates for the ESC and your remote control. Keeping firmware up-to-date can improve performance and add new features.
Troubleshooting
The FT60BD ESC is equipped with multiple protection functions to prevent damage. If you encounter issues, consider the following:
- No Power:
- Check battery charge level.
- Ensure the power switch is correctly connected and activated.
- Verify main battery connections for secure contact and correct polarity.
- Motor Not Responding:
- Check motor phase wire connections (A, B, C).
- If using sensored motors, verify Hall sensor connections.
- Ensure the remote control is paired and functioning correctly.
- Check ESC configuration using the Flipsky ESC Tool; perform motor detection if necessary.
- Sudden Shutdown or Reduced Performance:
- This could indicate a protection function has been triggered (e.g., low voltage, over-current, over-temperature).
- Allow the system to cool down if an over-temperature alert is indicated.
- Check battery voltage; recharge if low.
- Inspect for any short circuits or excessive load on the motors.
- Fault Alerts:
- Refer to the Flipsky ESC Tool for specific fault codes and diagnostic information.
- Common faults include over-voltage, under-voltage, over-current, and over-temperature.
If troubleshooting steps do not resolve the issue, contact customer support for further assistance.
User Tips
- Proper Cooling: While the ESC includes a heatsink, ensure adequate airflow around the unit, especially during high-power operation, to prevent overheating and thermal throttling.
- Initial Configuration: Always perform a motor detection and calibrate your remote control using the Flipsky ESC Tool after initial setup or any changes to your motor/battery configuration.
- Battery Management: Pay attention to your battery's voltage and current limits. The ESC's protection features are there to safeguard your components, but proper battery selection and management are crucial for longevity.
- Water Resistance: The IP65 rating means it's protected against dust and low-pressure water jets. Avoid submerging the ESC or exposing it to high-pressure water.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase records for any warranty claims.