Manuals+

BSIDE V30

BSIDE V30 Digital Multimeter User Manual

Model: V30 | Brand: BSIDE

1. Introduction

The BSIDE V30 is an intelligent True RMS digital multimeter designed for professional and enthusiast use. It combines the functionalities of a digital multimeter, an infrared temperature gun, and an induction pen, making it a versatile tool for various electrical and temperature measurement tasks. Featuring a 20000-count display, EBTN color HD LCD, and a dual power supply system, the V30 offers high precision and convenience for electricians, engineers, and electronic hobbyists.

2. Safety Information

WARNING: Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.

  • Always ensure the test leads are correctly inserted into the appropriate input jacks for the measurement being performed.
  • Do not exceed the maximum input values specified for each range.
  • Never operate the meter if it appears damaged or if the test leads are damaged.
  • Exercise extreme caution when working with voltages above 30V AC RMS, 42V peak, or 60V DC. Such voltages pose a shock hazard.
  • Ensure the meter is set to the correct function and range before making measurements.
  • Do not attempt to measure current in a circuit where the voltage exceeds the meter's maximum current input rating.
  • The device is rated CAT III 600V for high safety.
  • Keep fingers behind the finger guards on the test probes during measurements.
  • Replace batteries immediately when the low battery indicator appears.

3. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your vendor.

  • 1 x BSIDE V30 Smart Digital Multimeter (with built-in Lithium Battery)
  • 1 x Upgrade Test Leads (Red and Black)
  • 1 x USB Charging Cable
  • 1 x Carrying Case
  • 1 x Screwdriver
  • 1 x User Manual (this document)
  • 1 x Color Box
BSIDE V30 Multimeter and accessories
Image: BSIDE V30 Multimeter, test leads, USB cable, screwdriver, carrying case, and manual.

4. Product Overview

The BSIDE V30 is a multifunctional device combining a digital multimeter, an infrared thermometer, and an induction pen. Its robust design includes a fall-resistant silicone case for durability.

BSIDE V30 Multimeter functions
Image: The BSIDE V30 functions as a Digital Multimeter, Infrared Temperature Gun, and Induction Pen.

4.1 Key Features

  • Maximum Display: 20000 Counts for high precision.
  • Display Type: EBTN Color 3.8'' Large HD LCD display for clear visibility in various lighting conditions.
  • True RMS: Provides accurate measurements for non-sinusoidal waveforms.
  • Operating Mode: Auto Range for ease of use, with manual range selection available.
  • Infrared Temperature Measurement: Range of -20°C to 380°C (-4°F to 716°F) with laser indicator for precise targeting.
  • Dual Power System: Built-in 1200mAh rechargeable lithium battery (USB charging) and support for 2x 1.5V AAA alkaline batteries.
  • Safety: CAT III 600V rating, intelligent anti-burn chip with 220V voltage overload protection.
  • Additional Functions: V-Alert (Non-contact voltage detection), Live wire check, Diode test, Capacitance, Resistance, Frequency, Buzzer, Automatic shutdown, Flashlight.

4.2 Device Layout

BSIDE V30 Function Panel Indication
Image: Diagram indicating the various parts of the BSIDE V30 multimeter's function panel.

Key components and their functions:

  • Laser transmitter: Emits laser for infrared temperature targeting.
  • Non-contact voltage sensing area: Detects AC voltage without direct contact.
  • Power button: Turns the device on/off.
  • LCD color display: Shows measurement readings and function indicators.
  • Function switch key: Cycles through different measurement modes.
  • Switch button for DC and AC: Toggles between DC and AC measurements in certain modes.
  • Flashlight/laser indication: Activates the flashlight and laser pointer.
  • Infrared temperature measurement button: Initiates infrared temperature reading.
  • Silicone protective cover: Provides protection against drops and impacts.
  • Dry cell battery storage: Compartment for optional AAA batteries.
  • Current probe input (200mA FUSED): Input jack for current measurements.
  • COM (Black marker public end): Common input jack for all measurements.
  • INPUT (Red pen jack): Input jack for voltage, resistance, capacitance, diode, and frequency measurements.

5. Setup

5.1 Power Supply

The BSIDE V30 features a dual-mode power system:

  1. Built-in Rechargeable Lithium Battery: The multimeter comes with a built-in 1200mAh 3.7V lithium battery. This battery can be charged via the included USB charging cable. Connect the USB cable to the multimeter's charging port and a standard USB power source (e.g., computer, USB wall adapter).
  2. Optional AAA Alkaline Batteries: For extended use or as a backup, the device supports two 1.5V AAA alkaline batteries (not included). To install, open the battery compartment on the back of the device and insert the batteries, observing correct polarity.
Dual Mode Power System Diagram
Image: Diagram illustrating the dual power system with a rechargeable lithium battery and optional AAA alkaline batteries.

5.2 Connecting Test Leads

The test leads are essential for most electrical measurements. Always ensure they are securely connected to the correct input jacks before use.

  1. Insert the black test lead into the COM (Common) input jack.
  2. Insert the red test lead into the INPUT jack for voltage, resistance, capacitance, diode, and frequency measurements.
  3. For current measurements (mA/uA), insert the red test lead into the 200mA FUSED input jack.

6. Operating Instructions

The BSIDE V30 features an intelligent automatic mode selection for common measurements like AC/DC voltage and resistance. Other functions can be selected manually using the function switch key.

Multifunctional Real-time Measurement Examples
Image: Examples of various measurement functions including AC/DC Voltage, Current, Diode, Capacitance, Resistance, Buzzer, Frequency, and Non-Contact Voltage (NCV).

6.1 General Operation

  1. Power On/Off: Press the Power button to turn the multimeter on or off.
  2. Automatic Mode: In auto mode, the multimeter will automatically identify and measure AC/DC voltage, resistance, and continuity.
  3. Function Selection: Use the Function Switch Key to cycle through different measurement modes (e.g., Voltage, Current, Resistance, Capacitance, Diode, Frequency, Infrared Temperature, NCV, Live).
  4. AC/DC Selection: In voltage or current modes, press the AC/DC switch button to toggle between Alternating Current (AC) and Direct Current (DC) measurements if not automatically detected.

6.2 Measurement Functions

Below are instructions for specific measurement types:

DC Voltage Measurement

  1. Connect the black test lead to the COM jack and the red test lead to the INPUT jack.
  2. Select the DC Voltage mode (if not in auto mode).
  3. Place the test probes across the component or circuit to be measured.
  4. Read the DC voltage value on the display.
DC Voltage Measurement Example
Image: Example of measuring DC voltage with the BSIDE V30 multimeter.

AC Voltage Measurement

  1. Connect the black test lead to the COM jack and the red test lead to the INPUT jack.
  2. Select the AC Voltage mode (if not in auto mode).
  3. Place the test probes across the component or circuit to be measured.
  4. Read the AC voltage value on the display.
AC Voltage Measurement Example
Image: Example of measuring AC voltage with the BSIDE V30 multimeter.

DC/AC Current Measurement

  1. IMPORTANT: Current must be measured in series with the circuit. Ensure the circuit is de-energized before connecting the meter.
  2. Connect the black test lead to the COM jack.
  3. Connect the red test lead to the 200mA FUSED input jack.
  4. Select the Current mode. The meter can automatically identify AC or DC current.
  5. Break the circuit and connect the test leads in series with the load.
  6. Re-energize the circuit and read the current value on the display.
DC Current Test Example
Image: Example of performing a DC current test, showing the current jack connection and the meter in series with the circuit.

Resistance Measurement

  1. Connect the black test lead to the COM jack and the red test lead to the INPUT jack.
  2. Select the Resistance mode.
  3. Ensure the circuit or component is de-energized before measuring resistance.
  4. Place the test probes across the component.
  5. Read the resistance value on the display.

Capacitance Measurement

  1. Connect the black test lead to the COM jack and the red test lead to the INPUT jack.
  2. Select the Capacitance mode.
  3. Ensure the capacitor is fully discharged before measurement to prevent damage to the meter.
  4. Place the test probes across the capacitor.
  5. Read the capacitance value on the display.

Diode Test

  1. Connect the black test lead to the COM jack and the red test lead to the INPUT jack.
  2. Select the Diode mode.
  3. Place the test probes across the diode. The display will show the forward voltage drop. Reverse the probes to check for open circuit.

Frequency Measurement

  1. Connect the black test lead to the COM jack and the red test lead to the INPUT jack.
  2. Select the Frequency mode.
  3. Place the test probes across the circuit where frequency is to be measured.
  4. Read the frequency value on the display.

Infrared Temperature Measurement

  1. Press the Infrared Temperature Measurement button.
  2. Point the laser transmitter towards the target object. The laser helps in precise targeting.
  3. The display will show real-time temperature and maximum temperature during the scanning process.
Infrared Temperature Measurement Function
Image: The infrared temperature measurement function in use, showing the laser pointer and dual screen display for real-time and maximum temperature.

V-Alert (Non-Contact Voltage Detection)

  1. Select the V-Alert mode.
  2. Move the top of the multimeter near a live AC voltage source.
  3. The meter will indicate the presence of AC voltage through audible beeps and/or visual indicators on the display.
Non-contact Voltage Sensing Example
Image: Example of non-contact voltage sensing during electrical circuit repair.

Live Wire Check

  1. Select the Live mode.
  2. Place the red test probe into the socket or touch the wire to be tested.
  3. The display will show a

    Related Documents - V30

    Preview BSIDE S10/S11 Smart Digital Multimeter User Manual
    Comprehensive guide for the BSIDE S10/S11 Smart Digital Multimeter, covering safety warnings, product structure, button descriptions, technical specifications, operating instructions, and maintenance. Learn how to measure DC/AC voltage, resistance, capacitance, continuity, frequency, duty cycle, and perform NCV and LIVE wire detection.
    Preview BSIDE A10 Digital Multimeter User Manual and Specifications
    Comprehensive user manual and technical specifications for the BSIDE A10 digital multimeter, covering operation, safety, features, and warranty information.
    Preview BSIDE A1 Digital Multimeter User Manual and Specifications
    Comprehensive user manual for the BSIDE A1 digital multimeter, covering technical specifications, safety instructions, operation, and warranty information. Learn how to use your BSIDE A1 for accurate electrical measurements.
    Preview Bside ZT702S Digital Oscilloscope Multimeter User Manual
    Comprehensive user manual for the Bside ZT702S digital oscilloscope multimeter, covering operation, safety instructions, maintenance, and detailed technical specifications for both oscilloscope and multimeter functions.
    Preview BSIDE A5X Voltage Detector Multimeter User Manual
    Comprehensive user manual for the BSIDE A5X Voltage Detector Multimeter, detailing its features, specifications, operation instructions, and maintenance. Includes safety information and technical specifications.
    Preview BSIDE AVD06 Non-Contact Voltage Indicator User Manual
    Comprehensive user manual for the BSIDE AVD06 non-contact voltage indicator. This guide provides detailed information on product specifications, safe operation, features like auto/manual modes, sensitivity settings, AC voltage measurement, wire checking, and warranty details. Essential for electricians and DIY users.