Introduction
Thank you for choosing the SANDA 6130 Dual Display Sport Watch. This robust timepiece combines both analog and digital displays, offering a wide range of features suitable for daily wear and sports activities. Please read this manual carefully to understand the watch's functions and ensure proper use and maintenance.
Key Features
- Dual Display (Analog-Digital)
- 50 Meter Water Resistance (5 Bar)
- Shock Resistant ABS Case
- LED Night Light Display with Fluorescence Pointers
- Stopwatch Function
- Alarm Clock
- Auto Date and Week Display
- Complete Calendar
- Multiple Time Zone Support
- 12/24 Hour System Selection
- TPU Strap with Stainless Steel Buckle
- Acrylic Mirror Surface (Scratch Resistant)
- Original Japanese MAXELL Battery
Watch Controls
The SANDA 6130 watch features four primary buttons and a crown for various functions:
- LIGHT Button (Top Left): Activates the LED night light display.
- MODE Button (Bottom Left): Cycles through different modes (Time, Alarm, Stopwatch, Date).
- START Button (Top Right): Used to start/stop the stopwatch, adjust settings in various modes.
- RESET Button (Bottom Right): Used to reset the stopwatch, select options in various modes.
- Crown (Right Side): Used for analog time adjustment.
Initial Setup
Setting Analog Time
- Pull out the crown on the right side of the watch.
- Rotate the crown to adjust the analog hands to the desired time.
- Push the crown back in to set the analog time.
Setting Digital Time and Date
- Press the MODE button repeatedly until the digital time display starts flashing, indicating it's in setting mode.
- Use the START button to increase the value or move to the next setting item (e.g., hours, minutes, year, month, day).
- Use the RESET button to select or confirm the current setting.
- Continue adjusting until all desired settings (time, date, 12/24 hour format) are correctly configured.
- Press the MODE button again to exit the setting mode.
Operating Instructions
Night Light Display
Press the LIGHT button (top left) to illuminate the digital display and fluorescent pointers for easy reading in low-light conditions. The light will stay on for a few seconds.
Using the Stopwatch
- Press the MODE button until the stopwatch display appears (usually showing '00:00:00').
- Press the START button to begin timing.
- Press the START button again to pause the timing.
- Press the RESET button to clear the stopwatch to zero.
- To resume timing after pausing, press the START button.
Setting and Using the Alarm
- Press the MODE button until the alarm setting screen is displayed.
- Use the START button to adjust the hour and minute values.
- Use the RESET button to switch between setting hours and minutes, and to turn the alarm ON/OFF.
- Once set, the alarm will sound at the designated time. Press any button to silence it.
Hour Reporting (Chime)
The watch may include an hourly chime function. To activate or deactivate this feature, navigate to the chime setting within the modes (usually found near the alarm setting) and use the RESET or START button to toggle it.
Care and Maintenance
Water Resistance
The SANDA 6130 watch is rated for 50 meters (5 Bar) water resistance. This means it is suitable for daily use, including hand washing, showering, and swimming in shallow water. It is resistant to rainstorms.
Important: Do NOT press any buttons while the watch is submerged in water, as this can compromise the water resistance seal.
Cleaning
Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then rinse thoroughly and dry. Avoid harsh chemicals or abrasive materials.
Battery Replacement
The watch uses an original Japanese MAXELL battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | SANDA |
| Model Number | 6130 |
| Movement | Quartz, Dual Display, Digital (Electronic + Quartz) |
| Style | SPORT |
| Display Type | Analog-Digital |
| Water Resistance Depth | 5Bar (50 Meters) |
| Case Material | Plastic (ABS) |
| Case Shape | Round |
| Case Thickness | 18mm |
| Dial Diameter | 57mm |
| Dial Window Material Type | Acrylic |
| Band Material Type | Rubber (TPU) |
| Band Type | Sport Band |
| Band Width | 22-26mm |
| Band Length | 27cm |
| Clasp Type | Buckle (Stainless Steel) |
| Weight | 67g |
| Battery Included | Yes (MAXELL Japanese Original Battery) |
| Certification | CE |
Troubleshooting
- Digital display is dim or blank: The battery may be low or depleted. Replace the battery.
- Analog hands are not moving: Check if the crown is pushed in completely. If it is, the battery might be low, or there could be a mechanical issue.
- Water appears inside the watch: Immediately stop using the watch and seek professional repair. Water resistance may have been compromised.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not specified for this model). If issues persist, a battery replacement or professional inspection may be needed.
User Tips
- To prolong battery life, avoid excessive use of the night light.
- Regularly clean the watch strap and case to prevent dirt buildup, especially after sports activities.
- Store the watch in a cool, dry place away from direct sunlight and strong magnetic fields.
Warranty and Support
For any issues not covered in this manual, please contact the seller or an authorized service center. Keep your purchase receipt as proof of purchase for warranty claims.