1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DKD 061-LIN Electric Scooter/Moped Speedometer. This advanced LCD instrument is designed to provide essential riding data, featuring adjustable speed units (KMH/MPH) and compatibility with specific electric vehicle controllers.

2. Key Features
- Speedometer Type: Supports One-LIN protocol and CAN-BUS communication.
- Battery Voltage: Rated for 48V-72V systems.
- Display Data: Shows Speed (KMH/MPH), DC current, Battery Level, Trip Distance, Fault Display, Head Light status, Turning Light status, and Gear Display.
- Adjustable Settings: Customizable parameters including tire perimeter, motor pole pairs, voltage calibration, and speed unit.
- Material: Durable plastic construction.
- External Testing Certification: CCC certified.
3. Specifications
| Feature | Specification |
|---|---|
| Model Name | DKD 061-LIN |
| Speedometer Type | One-LIN protocol / CAN-BUS |
| Battery Voltage | Rated 48V-72V |
| Material | Plastic |
| Item Length | 16.2 cm |
| Item Width | 9.4 cm |
| Item Height | 3.8 cm |
| Origin | Mainland China |
| External Testing Certification | CCC |

4. Package Contents
The package typically includes:
- 1 x DKD 061-LIN Speedometer Unit
- 1 x Wiring Harness (Total length: 200mm, Cable protective sleeve: 110mm)

5. Installation and Wiring
Important Compatibility Note: This display is designed to work optimally with VOTOL and FarDriver controllers. Compatibility with other brands of controllers is not guaranteed and may result in improper functionality.
5.1 Wiring Diagram
Refer to the following diagram for correct wiring connections. The speedometer uses a 5557-2*10 connector.

5.2 Connector Pin Definition
| Wire Color | Function |
|---|---|
| Green/Black | CAN- |
| Yellow/Red | CAN+ |
| Yellow/White | LIN |
| Blue | Headlight |
| Light Blue | Turn Right |
| Orange | Turn Left |
| Purple | Battery- |
| Blue/White | Battery+ |
Ensure all connections are secure and correctly matched to your vehicle's wiring harness. Incorrect wiring can damage the speedometer or other components.
6. Operation and Settings
6.1 Display Information
The LCD display provides real-time information:
- Current Speed (KMH or MPH)
- DC Current
- Battery Level Indicator
- Trip Distance
- Fault Display
- Head Light Indicator
- Turning Light Indicators (Left/Right)
- Gear Display


6.2 Adjustable Settings
To access and modify settings:
- After powering on and the display self-test is complete, press and hold the left button for 10 seconds to enter the background settings.
- Enter the required password.
- Use the left button to adjust data values and the right button to shift between parameters.
- Password 153: Speedometer Calibration
- Set the tire perimeter (mm). Default is CC 1413mm (for an 18-inch tire).
- Set the number of motor pole pairs (PL). Default is PL 24-10 (24 pole pairs).
- Set the offset (default 10).
- After setting, long press the right button to confirm and move to the next parameter.
- Password 256: Gear Display Mode
- -2: High and Low gear display (E, S gear).
- -0: Normal gear display.
- Password 372: Clear Odometer (ODO)
- Can be performed a maximum of 3 times.
- Password 856: Voltage Selection
- Select 48V, 60V, 72V, or 96V. This synchronizes with the battery grid number.
- For lithium batteries, SOC (State of Charge) is automatically detected. If the battery type is changed, the device must be powered off and on again.
- Password 879: Fixed Voltage Calibration
- Calibrate fixed voltage values for 48V, 60V, 72V, 96V.
- Password 824: Self-Input Voltage Calibration
- Allows manual input for voltage calibration.
- Password 974: KMH/MPH Switch
- Toggle between Kilometers Per Hour (KMH) and Miles Per Hour (MPH).
- Password 928: Gear Light Settings
- Control D gear light and N gear light. Can be turned off if only LCD gear display is desired.
- Password 919: Overvoltage and Undervoltage Limits
- Adjust the overvoltage (front value) and undervoltage (back value) thresholds.
7. Maintenance
To ensure the longevity and optimal performance of your DKD Speedometer:
- Cleaning: Gently wipe the display with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the screen or casing.
- Protection: Keep the speedometer away from direct sunlight for prolonged periods and extreme temperatures.
- Connections: Periodically check wiring connections for any signs of wear, corrosion, or looseness. Ensure they remain secure.
- Water Exposure: While designed for outdoor use, avoid submerging the unit in water or exposing it to high-pressure water jets.
8. Troubleshooting
8.1 Common Issues and Solutions
- Speedometer Display Not Working / Incorrect Readings:
- Compatibility: Ensure your controller is a VOTOL or FarDriver brand. Universal controllers from other brands may not fully support the speedometer's functions.
- Wiring: Double-check all wiring connections against the provided diagram (Figure 4). Incorrect wiring is a common cause of malfunction.
- Settings: Verify that the tire perimeter and motor pole pair settings (Password 153) are correctly configured for your vehicle.
- Communication Signal: Confirm that the communication signal (One-LIN or CAN-BUS) from your controller is compatible and correctly connected.
- Incorrect Voltage Display:
- Voltage Selection: Check the voltage selection setting (Password 856) to ensure it matches your battery system (48V, 60V, 72V, 96V).
- Calibration: If necessary, perform a fixed voltage calibration (Password 879) or self-input voltage calibration (Password 824).
- Battery Type: If you changed battery types (e.g., from lead-acid to lithium), ensure you power cycle the speedometer after adjusting settings.
- ODO (Odometer) Reset Limit Reached:
- The ODO clear function (Password 372) is limited to 3 times. This is a design feature and not a fault.
9. User Tips
- Professional Installation: If you lack experience with electric kit assembly or wiring, it is highly recommended to seek professional assistance for installation to prevent potential damage. Man-made damage is not covered under warranty.
- Verify Compatibility: Before purchasing or installing, always confirm the compatibility of this speedometer with your specific controller model, especially regarding communication protocols (One-LIN/CAN-BUS).
- Initial Setup: Take your time during the initial parameter setup (tire perimeter, pole pairs, voltage) to ensure accurate readings and optimal performance.
10. Warranty and Support
Warranty: A 1-year warranty is offered for motors and controllers. Please note that the buyer is responsible for return shipping costs for repair or replacement under warranty.
Support: Should you encounter any issues or have questions regarding your DKD Speedometer, please contact the seller for assistance. We are committed to providing support and will do our best to help resolve any problems.
Limitation: The warranty does not cover damage caused by improper installation, misuse, or other man-made factors. It is crucial to follow all installation and operation guidelines provided in this manual.
11. Important Notices
This display is specifically designed to match with VOTOL and FarDriver controllers. Using it with other brands may lead to functional limitations or non-operation. Always verify compatibility before attempting installation.