TYAN S7106GMR-CGN-2

Contents

TYAN S7106 S7106GM2NR Dual Socket Server Motherboard User Manual

Model: S7106GMR-CGN-2

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the TYAN S7106GMR-CGN-2 Dual Socket Server Motherboard. This motherboard is designed for high-performance server and workstation applications, supporting Intel Xeon E Series processors and extensive DDR4 memory configurations.

Please read this manual thoroughly before proceeding with any installation or operation to ensure proper functionality and to prevent damage to the components.

TYAN S7106GMR-CGN-2 Motherboard with key features

Figure 1.1: TYAN S7106GMR-CGN-2 Motherboard overview, highlighting Intel Xeon, LGA 3647, 12xDDR4, SATA3, and E-ATX form factor.

2. Setup and Installation

2.1. Component Overview

The TYAN S7106GMR-CGN-2 is an E-ATX form factor motherboard featuring dual LGA 3647 sockets for Intel Xeon E Series processors and 12 DDR4 DIMM slots.

Top-down view of the TYAN S7106GMR-CGN-2 server motherboard

Figure 2.1: Top-down view of the TYAN S7106GMR-CGN-2 server motherboard.

Rear view of the TYAN S7106GMR-CGN-2 server motherboard, showing I/O ports

Figure 2.2: Rear view of the TYAN S7106GMR-CGN-2 server motherboard, showing I/O ports.

2.2. Processor Installation

  1. Carefully open the LGA 3647 CPU socket retention mechanism.
  2. Align the Intel Xeon E Series processor with the socket, ensuring the triangular markers match.
  3. Gently place the CPU into the socket without forcing it.
  4. Close the retention mechanism to secure the CPU.
  5. Install the appropriate CPU cooler. Refer to the cooler's manual for specific installation steps.
Close-up of an LGA 3647 CPU socket on the motherboard

Figure 2.3: Close-up view of an LGA 3647 CPU socket.

Diagram showing CPU cooler assembly and disassembly order with recommended screw torque

Figure 2.4: CPU cooler assembly and disassembly order with recommended screw torque (13.6 kgf-cm / 12 lbf-in).

2.3. Memory Installation

The motherboard supports DDR4 memory. Install DIMMs into the 12 available slots, following the motherboard's memory population guidelines for optimal performance (typically alternating slots for multi-channel configurations).

2.4. Storage and Expansion Cards

Connect SATA storage devices to the available SATA ports. Install PCI-E 3.0 expansion cards into the designated PCI-E slots as needed.

2.5. Power Supply Connection

Connect the main ATX power connector and any auxiliary CPU power connectors from your power supply unit (PSU) to the motherboard. Ensure all connections are secure.

3. Operating Instructions

3.1. Initial Boot-up

After all components are installed and connected, power on the system. The system should initiate the Power-On Self-Test (POST) and display the BIOS/UEFI interface.

Video 3.1: Demonstration of motherboard testing and a system running a UEFI BIOS screen.

3.2. BIOS/UEFI Configuration

Access the BIOS/UEFI setup by pressing the designated key during POST (commonly Del, F2, or F10). Here you can configure boot order, system time, and other hardware settings. It is recommended to update the BIOS and BMC (Baseboard Management Controller) to the newest versions for optimal performance and compatibility.

3.3. Operating System Installation

Follow the instructions provided by your chosen operating system for installation. Ensure all necessary drivers for the motherboard's components are installed after the OS is set up.

4. Maintenance

4.1. Cleaning

Regularly clean the motherboard and surrounding components to prevent dust buildup, which can lead to overheating and performance issues. Use compressed air and anti-static brushes for cleaning. Ensure the system is powered off and unplugged before cleaning.

4.2. CMOS Battery

The CMOS battery (CR2032) is essential for retaining BIOS settings. If the system frequently loses its time or BIOS settings, the CMOS battery may need replacement. Note that the CMOS battery is typically not included with used motherboards due to shipping restrictions.

4.3. Heatsink for CPU Power Section

For optimal stability and longevity, especially under heavy loads, consider installing an additional heatsink for the CPU power delivery section if one is not already present or sufficient.

5. Troubleshooting

5.1. General Issues

  • No Power/No POST: Double-check all power connections, including the main ATX and CPU power cables. Ensure the power supply unit (PSU) is functional.
  • System Instability/Crashes: Verify CPU and RAM are properly seated. Check for overheating. Ensure all drivers are up to date.
  • BMC Orange Light: If the BMC green light blinks but the orange light remains on, it may indicate a hardware failure. This has been observed with certain consumer-grade PSUs.

5.2. Power Supply Compatibility

This server motherboard may require a server-grade power supply unit (PSU) for stable operation. Some consumer-grade PSUs, such as the Corsair RM1000e, have been reported to cause issues (e.g., BMC hardware failure indication). If you encounter power-related problems, consider switching to a compatible server PSU.

5.3. CPU Compatibility

The motherboard supports Intel Xeon E Series processors with LGA 3647 socket. Unofficial CPUs (ES version) are generally not supported and their use may lead to system instability or void any potential warranty. Always use officially supported processors.

5.4. Version Specificity

If you require a specific motherboard version (e.g., REV1.0, REV2.0, REV2.1), please contact the seller before purchase to confirm availability. Otherwise, a random version may be shipped.

6. Specifications

AttributeValue
Brand NameXINRENCHONG (TYAN)
Chipset ManufacturerIntel
ChipsetC612
Socket TypeOnboard CPU (LGA 3647)
Processor CompatibilityIntel Xeon E Series
Support Memory TypeDDR4
Maximum RAM Capacity512GB
Storage Interface TypeSATA
PCI - E standardsPCI-E 3.0
Number of PCI2
Onboard LAN1x RJ45
Back I/O Ports1x RJ45
Usage ScenarioWorkstation, Server
ApplicationServer, Workstation
PackageYes
With CPUNo
Battery IncludedNo
RAID SupportedNo
High-concerned chemicalNone
Special FeaturesNONE
OriginMainland China

6.1. Package Dimensions and Weight

  • Length: 10 cm
  • Width: 10 cm
  • Height: 10 cm
  • Weight: 2.0 kg

7. User Tips

  • Additional Heatsink: For prolonged stability, especially with demanding workloads, consider adding an extra heatsink to the CPU power delivery section.
  • Power Supply: This server motherboard may perform best with a dedicated server power supply unit (PSU) rather than some consumer-grade PSUs.
  • BIOS/BMC Updates: Keep your BIOS and BMC firmware updated to the latest versions for improved compatibility and features.
  • Used Condition: As this motherboard is used, minor cosmetic imperfections such as rust, scratches, or dust are possible.
  • CMOS Battery: The CMOS battery is typically not included due to shipping regulations. You will need to acquire and install a CR2032 battery separately.
  • CPU Compatibility: Always verify that your chosen Intel Xeon processor is officially supported by the LGA 3647 socket and the motherboard's chipset. Unofficial (ES version) CPUs are not recommended and may not function correctly.

8. Warranty and Support

For detailed warranty information and support, please refer to the official TYAN documentation or contact your vendor. A user manual in PDF format may be available for download at this link.

If you encounter any product-related issues, please contact the seller directly for assistance. Providing a video of the issue can help expedite the troubleshooting process.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.