Introduction
The KCEVE 4K USB C KVM Switch allows you to control two USB-C enabled computers or devices using a single set of keyboard, mouse, and an HDMI monitor. This device supports high-resolution video output up to 4K@60Hz and provides up to 100W Power Delivery to connected laptops, ensuring a streamlined and efficient workspace.

Package Contents
Please check the package for the following items:
- 1 x KVM Switch USB C
- 2 x 1.0M USB-C Cables
- 1 x 1.5M HDMI 2.0 Cable
- 1 x Wired Remote Controller (1.5m)
- 1 x User Manual
Note: A power adapter is NOT included and may be required for charging or high-power USB devices.
Setup Instructions
Follow these steps to connect your KVM switch:
- Connect PC 1 to the USB-C1 port on the KVM switch using one of the provided USB-C cables.
- Connect PC 2 to the USB-C2 port on the KVM switch using the second provided USB-C cable.
- Connect your HDMI monitor to the HDMI port labeled "Monitor" on the KVM switch using the provided HDMI 2.0 cable.
- Connect your keyboard, mouse, printer, U-disk, or other USB 2.0 devices to the USB-A ports on the KVM switch.
- (Optional) To charge your computers or power high-demand USB devices, connect external power adapters (not included) to the "POWER 1" and "POWER 2" ports on the KVM switch. "POWER 1" charges PC 1, and "POWER 2" charges PC 2.
- Connect the wired remote control to its dedicated port on the KVM switch for convenient switching.

Important Notes:
- Ensure your computers/devices have USB Type-C ports that support Data, Video, and Power Delivery (Alternate Mode) for full functionality.
- When using a tablet/mobile phone, an external power supply is required to power the KVM.
- Video adapters for converting HDMI, DisplayPort, VGA, DVI to USB C are not compatible with this KVM switch.
Operating Instructions
Switching Between Computers
The KVM switch offers two methods for switching between connected computers:
- Front Panel Button: Press the "SELECT" button on the front panel of the KVM switch to toggle between PC 1 and PC 2. LED indicators will show which computer is currently active.
- Wired Remote Controller: Use the included wired remote controller to switch between PC 1 and PC 2. This provides convenience for managing your desktop.

Power Delivery Functionality
The KVM switch supports Power Delivery (PD 3.0) up to 100W for reverse charging connected laptops. Each "POWER" port (POWER 1 or POWER 2) is associated with its respective "PC" port (USB-C1 or USB-C2) and will only provide power to that specific computer.
Note:
- The power output to the computer will be slightly less than the power supplied to the input due to the KVM switch's own power requirements.
- If no external power is connected to the KVM, it will draw approximately 5V 0.2A from the currently selected "PC" port.

Maintenance
To ensure the longevity and optimal performance of your KCEVE KVM switch:
- Keep the device in a cool, dry place, away from direct sunlight and heat sources.
- Avoid exposing the device to moisture or extreme temperatures.
- Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ensure all cables are securely connected to prevent signal loss or intermittent issues.
Troubleshooting
- No video output or incorrect resolution:
- Ensure your monitor and computers support 4K resolution and HDMI 2.0 if you are aiming for 4K@60Hz.
- Verify that the HDMI cable is securely connected to both the KVM switch and the monitor.
- Check that the USB-C cables from your computers to the KVM switch are fully inserted and support video output (Alternate Mode).
- Try restarting the connected computers and the monitor.
- USB devices (keyboard/mouse) not responding:
- Ensure the USB devices are properly plugged into the USB-A ports on the KVM switch.
- If using high-power USB devices (e.g., external HDDs), connect an external power adapter to the KVM switch's "POWER" ports.
- Try connecting the USB devices directly to the computer to confirm they are functional.
- Switch to the other computer and back to refresh the USB connection.
- Laptop not charging or charging slowly:
- Ensure an external power adapter is connected to the correct "POWER" port (POWER 1 for PC 1, POWER 2 for PC 2).
- Verify that your power adapter supports Power Delivery (PD 3.0) and provides sufficient wattage (up to 100W).
- The actual charging power may be limited by the connected computer or tablet.
- KVM switch not powering on:
- The KVM switch typically draws power from the connected USB-C cables. Ensure at least one computer is connected and powered on.
- If using high-power USB devices, an external power adapter might be necessary to power the KVM itself.
Specifications
| Feature | Detail |
|---|---|
| Model Number | USB C KVM Switch |
| Brand Name | KCEVE (AIMOS) |
| Interface Type | USB Type-C |
| Ports | 2 x USB-C Input, 1 x HDMI Output, 4 x USB 2.0 (USB-A) Output, 2 x Power Input (USB-C) |
| Function | HDMI-Compatible, KVM Switch |
| Standard | USB 3.0 (for KVM functionality, USB 2.0 for peripheral ports) |
| Resolution Support | Up to 4K@60Hz, 2K@120Hz, 1440P@100Hz (backward compatible) |
| Power Delivery | PD 3.0, up to 100W (per PC input) |
| Switching Modes | Push Button, Wired Remote Controller |
| Compatibility | Windows 10/8/8.1/7/XP, Mac OS, Linux, Thunderbolt 3, Nintendo Switch, Steam Deck, MHL-enabled mobile phones (requires USB-C Alternate Mode support) |
| Certification | CE, FCC, RoHS |
| Package Length | 15 cm |
| Package Width | 15 cm |
| Package Height | 5 cm |
| Package Weight | 0.4 kg |
User Tips
- For optimal 4K@60Hz performance, ensure all connected cables (USB-C and HDMI) are high-quality and rated for 4K@60Hz.
- If you experience flickering or instability, try reducing the resolution or refresh rate to see if it resolves the issue.
- When connecting mobile devices or game consoles like Nintendo Switch/Steam Deck, confirm they support video output over USB Type-C (Alternate Mode) and provide external power to the KVM if needed.
- To keep your desktop tidy, utilize the wired remote control for switching, allowing the KVM unit to be placed out of sight.
- If you need more USB 2.0 ports, a standard USB hub can be connected to one of the KVM's USB-A ports.
Warranty and Support
This KCEVE product comes with a standard manufacturer's warranty. For warranty claims, technical support, or further assistance, please refer to the seller's contact information or the official KCEVE website. Keep your purchase receipt as proof of purchase.