EYAOO SH-V12 Voice Remote Control User Manual

1. Product Overview

The EYAOO SH-V12 Voice Remote Control (also known as RM-L1659) is designed to enhance your viewing experience with Sharp Smart LED/LCD TVs. This remote offers both infrared (IR) and Bluetooth wireless communication, providing versatile control over your television. Key features include voice command functionality, dedicated buttons for popular streaming services like Netflix, YouTube, and Prime Video, and a user-friendly design.

This image shows the remote control's front, emphasizing its voice control capability and quick access buttons for Netflix, YouTube, and Prime Video. It also indicates "Without setup", "SOP Performance STABL", and "NEW ABS" features.

This image illustrates the voice function of the remote, allowing for smarter TV interaction.

2. Installation Instructions

To begin using your remote control, you first need to install the batteries.

1. Open Battery Cover: Slide open the battery cover located on the back of the remote control.
2. Insert Batteries: Insert two (2) AAA batteries into the battery compartment. Ensure the positive (+) and negative (-) terminals of the batteries align correctly with the polarity marks inside the compartment. (Batteries are not included).
3. Close Battery Cover: Securely close the battery cover.

This image displays the rear of the remote control, indicating the battery cover and the overall ergonomic design.

3. Pairing Methods

The SH-V12 remote control can operate via both Infrared (IR) and Bluetooth. For voice functionality and full smart TV features, Bluetooth pairing is required.

3.1. Bluetooth Pairing (for Voice Control and Smart Features)

1. Preparation: Ensure batteries are correctly inserted into the remote control. Make sure your compatible Sharp Smart TV is powered on and its Bluetooth function is enabled.
2. Initiate Pairing: Point the remote control towards the TV and press and hold the OK button (the central button within the directional pad) for 5-10 seconds.
3. Confirmation: The TV should display a pairing confirmation message. Follow any on-screen prompts to complete the pairing process.
4. Test Functionality: After pairing, test various functions, including voice commands and other buttons. If some buttons do not work correctly, repeat step 2 to re-pair.

This image highlights the "OK" button, which is crucial for initiating the pairing process, and emphasizes the soft plastic keys for sensitive button response.

3.2. Infrared (IR) Operation (Basic Functions)

For basic TV functions (power, volume, channel), the remote can operate via IR without specific pairing, provided it is compatible with your Sharp TV model. Ensure the remote is pointed directly at the TV's IR receiver.

4. Basic Operations

• Power On/Off: Point the remote at the TV and press the Power button (red button at the top-left). To power off, press and hold the Power button for approximately 2 seconds.
• Volume/Channel Adjustment: Use the VOL +/- buttons to adjust volume and CH +/- buttons to change channels.
• Navigation: Use the directional pad (up, down, left, right) and the OK button to navigate menus and select options.
• Voice Control: Press the Voice button (microphone icon) and speak your command clearly. For example, "Please open variety channel," "Please help me lower the volume," or "Please turn on the TV show."
• Quick Access Buttons: Utilize the dedicated buttons for Netflix, YouTube, and Prime Video for instant access to these streaming services.
• Menu/Info: Use the MENU and INFO buttons to access TV menus and display information.
• Back/Exit: Use the BACK and EXIT buttons to return to the previous screen or exit menus.

This image demonstrates the "Accurate Control" feature, allowing users to easily switch TV programs using voice commands.

This image showcases the remote's ability to access "Different TV Channels" and streaming services directly.

5. Safety Precautions

To ensure safe and optimal use of your remote control, please observe the following precautions:

• Do not place the remote control in high-temperature or humid environments, such as direct sunlight, bathrooms, or near heating appliances. This can cause circuit damage or battery leakage.
• Use only the specified type of batteries (2 AAA Alkaline Batteries). Do not mix old and new batteries or batteries of different brands, as this may lead to short circuits.
• Avoid dropping or colliding the remote control to prevent damage to its shell and internal components. Such damage may affect voice recognition or remote control functions.
• Children should use the remote control under adult supervision to prevent battery ingestion or disassembly. Dispose of used batteries in accordance with local environmental protection requirements.
• Keep the environment quiet during voice recognition to avoid interference from strong noise (e.g., high-power speakers, noisy crowds), which may affect the accuracy of command recognition.

6. Product Specifications

This image provides a quick reference for the remote control's key specifications.

Disclaimer: This remote control is intended for compatible devices only. The manufacturer is not liable for faults caused by device incompatibility or improper operation. Product parameters may vary slightly by batch and are subject to the actual product.

7. Troubleshooting

7.1. Pairing Failure

• Check Battery Power: If the remote is not responding or pairing fails, check the battery power. Replace with new AAA batteries if they are low.
• Bluetooth Interference: For Bluetooth pairing, ensure your TV's Bluetooth is enabled. Turn off any other nearby Bluetooth devices that might cause interference.
• IR Obstruction: For infrared operation, ensure the remote control is pointed directly at the TV's IR receiver without any obstructions. Maintain a distance of 0.5-1 meter for optimal IR signal.
• Repeat Pairing: If pairing fails multiple times, try restarting both your Sharp Smart TV and the remote control, then repeat the Bluetooth pairing steps.
• Compatibility: Confirm that your TV model is compatible with the SH-V12 remote control. This remote is specifically designed for Sharp Smart LED/LCD TVs.

7.2. General Issues

• Buttons Unresponsive: Ensure batteries are fresh and correctly inserted. If specific buttons are not working after Bluetooth pairing, try re-pairing the remote.
• Voice Command Inaccuracy: Ensure the environment is quiet during voice input to avoid interference from loud noises. Speak clearly and directly into the remote's microphone.

8. User Tips

• Ergonomic Design: Users have noted the remote's comfortable feel, similar to original TV remotes, making it pleasant to hold and use for extended periods.
• Intuitive Buttons: The buttons are generally considered flexible and easy to use, suggesting a straightforward layout that doesn't require extensive learning.
• Voice Functionality: For best results with voice commands, ensure you speak clearly and in a quiet environment.
• Battery Life: While not explicitly stated, using high-quality alkaline AAA batteries will ensure longer performance and reduce the frequency of battery replacement.

9. Warranty & Support

For product-related inquiries or technical assistance, please refer to the official EYAOO support channels. Keep your purchase records for any warranty claims.

This product is certified with CE, indicating compliance with European health, safety, and environmental protection standards.

A user manual in PDF format is available for detailed information. You can access it via the following link: View User Manual (PDF)