Introduction
Congratulations on your purchase of the CELESTRON Libra 80500 Professional Astronomy Telescope. This compact and portable refractive telescope is designed for both beginners and students, offering high-quality observations of celestial objects. This manual provides essential information for the safe and effective use, assembly, and maintenance of your telescope.
Safety Information
WARNING: Never use this telescope to directly observe the sun. Doing so will cause permanent and irreversible damage to your eyes.

Safety warning: Do not observe the sun directly.
Always ensure all caps are on when the telescope is not in use to protect the optics from dust and damage. Handle all components with care to prevent accidental drops or impacts.
What's in the Box
Your CELESTRON Libra 80500 telescope package should contain the following items:
- Telescope Optical Tube Assembly (Main Tube)
- Stainless Steel Tripod with Alt-azimuth Mount
- Accessory Tray
- Red Dot Finder Scope
- Aspheric Eyepiece 23mm (21.7x magnification)
- Eyepiece 10mm (50x magnification)
- 90-degree Erect Image Diagonal (Zenith Mirror)
- Objective Lens Cover
- Eyepiece Caps
- Phone Adapter (for astrophotography)
- Carry Bag (for portability)

Diagram showing the main components of the telescope: Objective lens cover, Main tube, Dovetail plate, Alt-azimuth mount, Horizontal lock knob, Finder scope, Eyepiece, Diagonal, Focus knob, Slow-motion control rod, Stainless steel tripod, Accessory tray.
Setup Instructions
Follow these steps to assemble your telescope. For a visual guide, please refer to the installation video below.
Video: CELESTRON Telescope Assembly and Basic Operation Guide.
- Set up the Tripod: Carefully unfold the legs of the stainless steel tripod until they are fully extended and stable. (Refer to video 0:08-0:15)
- Install the Accessory Tray: Attach the accessory tray to the center brace of the tripod. This tray provides stability and a convenient place for your eyepieces. (Refer to video 0:16-0:18)
- Mount the Main Optical Tube: Place the main telescope tube onto the alt-azimuth mount on top of the tripod. Align the dovetail plate on the telescope with the mount. (Refer to video 0:19-0:22)
- Secure the Main Tube: Tighten the locking knob on the mount to firmly secure the telescope tube in place. (Refer to video 0:23-0:25)
- Attach the Finder Scope: Install the red dot finder scope onto its designated bracket on the main telescope tube. Secure it with the provided screws or knob. (Refer to video 0:26-0:29)
- Prepare the Diagonal: Remove the protective caps from both ends of the 90-degree erect image diagonal (zenith mirror). (Refer to video 0:30-0:33)
- Insert the Diagonal: Insert the diagonal into the focuser of the main telescope tube and secure it with the small thumbscrew. (Refer to video 0:34-0:37)
- Insert an Eyepiece: Choose an eyepiece (e.g., the 23mm for wider views or 10mm for higher magnification). Remove its cap and insert it into the diagonal. Secure it with the small thumbscrew. (Refer to video 0:38-0:43)
Your telescope is now assembled and ready for initial alignment and observation.
Operating Instructions
Once assembled, follow these steps for observation:
- Align the Finder Scope: Before observing, align the red dot finder scope with the main telescope. Point the main telescope at a distant, stationary object (like a street light or a distant tree during the day). Look through the finder scope and adjust its alignment screws until the red dot is centered on the same object that is visible in the main telescope's eyepiece.
- Horizontal Movement: Use the horizontal lock knob and the slow-motion control rod to move the telescope left or right, covering a full 360-degree horizontal range. (Refer to video 0:45-0:48)
- Vertical Movement: Use the vertical adjustment handle to move the telescope up or down to aim at your desired celestial object. (Refer to video 0:49-0:53)
- Focusing: Once you have an object in view through the eyepiece, turn the focus knob slowly until the image appears sharp and clear. (Refer to video 1:00-1:03)
- Changing Magnification: To change magnification, loosen the thumbscrew on the diagonal, carefully remove the current eyepiece, and insert a different one. Re-tighten the thumbscrew. Remember that higher magnification makes objects appear larger but also dimmer and more susceptible to atmospheric conditions.
- Using the Phone Adapter: Attach your smartphone to the phone adapter and then attach the adapter to an eyepiece. This allows you to capture images or videos through the telescope.

Example of smartphone astrophotography setup.
Maintenance
Proper maintenance will ensure the longevity and performance of your telescope:
- Cleaning Optics: Use a soft brush or compressed air to remove dust from lenses. For smudges, use a specialized optical cleaning solution and a microfiber cloth. Never touch optical surfaces with your fingers.
- Storage: Store the telescope in a dry, dust-free environment. Keep all protective caps on when not in use. The included carry bag is ideal for storage and transport.

Telescope stored in its carry bag.
- Mechanical Parts: Periodically check all screws and knobs for tightness. Do not over-tighten.
Troubleshooting
If you encounter issues, try these common troubleshooting steps:
- No Image or Dark Image:
- Ensure all lens caps (objective lens, eyepiece, diagonal) are removed.
- Check that an eyepiece is correctly inserted and secured.
- Verify that the finder scope is aligned and you are pointing at the correct object.
- If observing at night, allow your eyes to adjust to the darkness.
- Fuzzy or Unclear Image:
- Adjust the focus knob slowly in both directions until the image is sharp.
- Ensure the eyepiece is fully inserted and secured.
- Check for condensation or dirt on the lenses.
- Atmospheric conditions (e.g., heat haze, turbulence) can affect image clarity, especially at high magnifications.
- Telescope is Unstable:
- Ensure the tripod legs are fully extended and locked.
- Verify the accessory tray is securely attached, as it adds stability.
- Make sure the main optical tube is tightly secured to the mount.
Specifications
| Feature | Detail |
|---|---|
| Model | Libra 80500 (SCTW-80) |
| Optical Structure | Refractive |
| Objective Lens Diameter | 80mm |
| Focal Length | 500mm |
| Eyepiece 1 | Aspheric 23mm (21.7x magnification, 60-degree field of view) |
| Eyepiece 2 | 10mm (50x magnification) |
| Diagonal | 90-degree Erect Image Diagonal |
| Finder Scope | Red Dot Finder |
| Mount Type | AZ Theodolite (Alt-azimuth) |
| Tripod Material | Stainless Steel |
| Tube Material | Aluminum Alloy |
| Lens Coating | FMC Antireflection Film |
| Prism Description | BAK4 |
| Water Resistance Level | IPX5 |
| Package Weight | 8.0 kg |
| Package Dimensions (L x W x H) | 84cm x 39cm x 18cm |
User Tips
- Start with Low Magnification: When first locating an object, always start with the lowest magnification eyepiece (the one with the larger focal length, e.g., 23mm). This provides a wider field of view, making it easier to find and center objects.
- Observe from Dark Locations: For the best astronomical observations, find a location away from city lights. Light pollution significantly reduces the visibility of fainter celestial objects.
- Allow for Temperature Acclimation: If you bring your telescope from a warm indoor environment to a cold outdoor environment, allow it some time (30-60 minutes) to acclimate to the ambient temperature. This prevents image distortion caused by temperature differences within the optical tube.
- Steady Surface: Always place the tripod on a stable, level surface to minimize vibrations and ensure steady viewing.
Warranty and Support
For any warranty claims, technical support, or inquiries regarding your CELESTRON Libra 80500 telescope, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.