DELIPOP Industrial Indoor Wall Light

1. Introduction

Thank you for choosing the DELIPOP Industrial Indoor Wall Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new wall lamps. Please read these instructions carefully before installation and retain them for future reference.

The DELIPOP Industrial Indoor Wall Light features a vintage design with a black iron and solid wood construction, creating a retro and nostalgic atmosphere. It is designed for indoor use in various settings such as living rooms, bedrooms, dining rooms, foyers, and studies.

Figure 1: DELIPOP Industrial Wall Light in a living room setting.

2. Safety Information

• Always turn off the power supply at the main circuit breaker before beginning any electrical work.
• Installation should be performed by a qualified electrician or a person with sufficient electrical knowledge to avoid electric shock or fire hazards.
• Ensure the voltage supply matches the product's specified voltage (220 V).
• Do not connect the fixture to a power source until it is fully assembled and mounted.
• Use only E27 base bulbs as specified. Do not exceed the maximum wattage recommended for the bulb type.
• Keep flammable materials away from the light fixture.
• Do not touch the bulb immediately after use, as it may be hot.
• This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.

3. Package Contents

Your DELIPOP Industrial Indoor Wall Light package includes the following items:

• 2 x Wall Light Fixtures (black iron and wood construction)
• 2 x Sets of Mounting Accessories (screws, wall anchors, etc.)

Note: E27 bulbs are NOT included and must be purchased separately.

Figure 2: Two DELIPOP Industrial Wall Lights (bulbs not included).

4. Specifications

Figure 3: Dimensions of the DELIPOP Industrial Wall Light. Height: 19cm (7.48inch), Width: 10cm (3.93inch), Depth: 6cm (2.36inch), Base Thickness: 2cm (0.78inch).

5. Setup and Installation

Before you begin: Ensure the power is turned off at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, drill if needed).

1. Prepare the Mounting Surface: Choose a dry, flat wall surface for installation. Ensure there are no hidden electrical wires or pipes in the drilling area.
2. Mark Drilling Points: Hold the wall light's wooden base against the wall at the desired installation spot. Use a pencil to mark the positions for the mounting screws.
3. Drill Holes: Drill pilot holes at the marked positions. If installing into drywall, insert the provided wall anchors.
4. Connect Wiring: Carefully connect the wall light's wires to your household electrical wiring. Typically, this involves connecting the live (L), neutral (N), and ground (GND) wires. Ensure all connections are secure and insulated with wire nuts or electrical tape. If you are unsure, consult a qualified electrician.
5. Mount the Fixture: Align the wooden base of the wall light with the drilled holes and secure it to the wall using the provided mounting screws. Ensure the fixture is firmly attached.
6. Install the Bulb: Screw an E27 base bulb (not included) into the lamp holder. It is recommended to use old-fashioned bulbs to enhance the retro aesthetic.
7. Restore Power: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.

Figure 4: Components of the wall light, showing the wooden base and E27 socket.

6. Operation

The DELIPOP Industrial Indoor Wall Light is operated via a standard wall switch connected to your household electrical circuit. Once installed and powered, simply use the wall switch to turn the light on or off.

7. Maintenance

• Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: Always turn off the power before replacing a bulb. Allow the old bulb to cool completely before removing it. Screw in a new E27 bulb, ensuring it is securely seated.
• Inspection: Periodically check the wiring and mounting for any signs of wear, damage, or looseness. Address any issues promptly.

8. Troubleshooting

• Light does not turn on:
  • Check if the power supply is on at the circuit breaker.
  • Ensure the bulb is correctly installed and not faulty. Try a new bulb.
  • Verify all wiring connections are secure.
• Cosmetic variations: Due to manual welding and natural wood materials, the arc of the metal arm or the wood grain may not be exactly identical to product images. This is normal and part of the product's unique character.
• Size discrepancies: Please allow for a 1-2cm error in measurements due to manual production processes.
• Silicone band issue: If the silicone band around the bulb holder appears swollen or has fallen off during transportation, gently hold it inward with your fingers and press to reset it into place.

9. User Tips

• Bulb Choice: To enhance the retro and nostalgic aesthetic, consider using Edison-style filament LED bulbs with a warm color temperature. These bulbs complement the vintage design of the fixture.
• Placement: For optimal lighting and aesthetic appeal, consider installing these wall lights symmetrically, for example, on either side of a bed, mirror, or artwork.

10. Warranty and Support

The DELIPOP Industrial Indoor Wall Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions regarding your product, please contact DELIPOP Store customer service through the platform where you made your purchase.