1. Package Contents
Please check the package for the following items:
- 2 x T2 TWS Wireless Headphones (Left and Right)
- 1 x Charging Box
- 1 x Data Cable (Type-C)
- 1 x User Manual
2. Product Overview
The T2 TWS Wireless Headphones feature a transparent design, LED digital power display, and Bluetooth 5.3 connectivity for a stable and high-quality audio experience. The in-ear design with silicone ear caps ensures comfortable wear.
3. Setup and First Use
3.1 Charging the Headphones and Charging Box
Before first use, fully charge the headphones and the charging box.
- Connect the provided Type-C data cable to the charging box's Type-C port and a suitable USB power adapter (not included).
- The LED digital display on the charging box will show the charging status and battery percentage.
- Place the headphones into the charging box. The LED display will indicate the charging status of individual earbuds.
- Charging time for both the headphones and the charging box is approximately 45 minutes for a full charge.
3.2 Pairing with Your Device
The T2 TWS headphones utilize Bluetooth V5.3 for a stable and efficient connection.
- Ensure the headphones are charged.
- Open the charging case and take out both headphones. They will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and enable Bluetooth.
- Search for available devices and select "CY-T2" (or similar name) from the list.
- Once connected, you will hear a confirmation tone, and the headphones will be ready for use.
The communication distance is up to 15 meters in an obstacle-free environment.
4. Operating Instructions
4.1 Power On/Off
- Power On: Take the headphones out of the charging case. They will automatically power on.
- Power Off: Place the headphones back into the charging case. They will automatically power off and begin charging.
4.2 Music Playback
The headphones support basic music control functions via their control buttons (specific tap/press functions are typically detailed in the included user manual, but generally include):
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Volume Control: The headphones feature volume control. Specific gestures or taps for volume adjustment should be referenced in the included user manual.
4.3 Calling Functions
The T2 TWS headphones support high-definition binaural calls.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud for 2 seconds.
4.4 Voice Assistant
The headphones have a built-in voice assistant feature. Activate it by pressing and holding the control button (refer to the included user manual for exact duration).
4.5 LED Power Display
The charging case features an LED digital display that accurately shows the remaining power of the charging compartment and the individual left and right earphones. This allows you to monitor battery levels at a glance.
5. Maintenance and Care
- Cleaning: Use a soft, dry, lint-free cloth to clean the headphones and charging case. Do not use harsh chemicals or abrasive materials.
- Silicone Ear Caps: The silicone ear caps can be removed and gently cleaned with water and mild soap if necessary. Ensure they are completely dry before reattaching.
- Waterproof: The headphones are waterproof. However, avoid prolonged exposure to water or submersion. Dry them thoroughly if they get wet.
- Storage: When not in use, store the headphones in their charging case to protect them and ensure they remain charged. Store in a cool, dry place away from extreme temperatures.
6. Troubleshooting
- Headphones not pairing: Ensure both headphones are out of the charging case and fully charged. Turn off and on your device's Bluetooth, then try pairing again. If issues persist, try resetting the headphones (refer to the included user manual for specific reset instructions).
- No sound from one earbud: Place both earbuds back into the charging case, close it, then open it and take them out again. Ensure they are properly paired.
- Charging issues: Check the Type-C cable and power adapter. Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
- Poor sound quality: Ensure the earbuds are properly seated in your ears for a good seal. Check your device's audio settings.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | VYOPBC |
| Model | CY-T2 |
| Bluetooth Version | 5.3 |
| Communication Distance | Obstacle free 15 meters |
| Product Chip | Jerry 6983D |
| Product Horn | 8mm composite film horn |
| Driver Diameter | 20mm |
| Frequency Response Range | 20 - 20000 Hz |
| Sensitivity | 123 dB |
| Resistance | 32 Ohm |
| Headphone Battery Capacity | 30mAh |
| Charging Box Battery Capacity | 300mAh |
| Working Time | 5 hours (earbuds), 20 hours (with charging box) |
| Standby Time | 60 days+ |
| Charging Time | Approximately 45 minutes |
| Charging Interface | Type-C |
| Material | Plastic |
| Weight (Gross) | 135g |
| Features | With microphone, Active Noise Cancelling, Volume Control, Control Button, Voice assistant built-in, Waterproof |
| Colors Available | Black, White, Pink, Green, Blue |
8. User Tips
- For optimal sound quality and noise cancellation, ensure the silicone ear caps fit snugly in your ears. Experiment with different sizes if available.
- Regularly check the LED display on the charging case to monitor battery levels and avoid unexpected power loss during use.
- When experiencing connectivity issues, try placing the earbuds back in the case for a few seconds, then taking them out again to re-establish the connection.
9. Warranty and Support
For any issues, inquiries, or assistance with your T2 TWS Wireless Headphones, please contact the seller directly. They are committed to providing the highest standard of customer service.
